Operation Manual

94
Setting a Password [Password (Menu)] / [Password (Logo)]
A password can be set for your projector to avoid operation by an unauthorized person.
When "Password (Menu)" is set, changing the menu from Basic to Advanced will display "Password (Menu)" input
screen.
When "Password (Logo)" is set, doing any one of the following two operations will display the Password input screen.
• Changing the background
• Changing the logo data in a PC card
Entry:
To assign your password:
NOTE: Up to 15 alphanumeric characters can be assigned.
1. Type a password.
Highlight "Entry" and press the ENTER button.
The "Enter the Password" screen will be displayed.
Make sure that is highlighted and then press the ENTER button.
The Software keyboard appears. Use the Software keyboard to type a password and then highlight "OK"
on the “Enter the Password” screen and press the ENTER button.
The [Confirm Password] screen will be displayed.
2. Type the same password again. Highlight "OK" on the “Enter the Password” screen and press the
ENTER button.
Your password will be assigned.
Delete:
To delete your password:
1. Highlight [Delete] and press the ENTER button. The "Current Password" screen will be displayed.
2. Use the Software keyboard to type your password. Highlight "OK" on the “Current Password” screen and
then press the ENTER button.
Your password will be deleted.
6. Using On-Screen Menu