User's Manual
37
• CALL VOLUME
Factory Default: Middle
You can adjust receiver volume.
- Press key in Standby mode. Your
phone displays the main menu.
- Press key to select “5.Setting” and then
press key.
- Press key to select “1.User Setting” and
then press key.
- Press key to select “2.Talk” and then
press key.
- Press key to select “3.Call Volume” and
then press key.
- Call Volume can be set in 3 levels (Small,
Middle and Large).
- Press key to select an appropriate
volume and then press “OK” soft key.
You can reach Call Volume menu
by pressing following keys.
Go to Call Volume menu:
• HANDOVER TONE
Factory Default: Disable
Your phone can provide a warning tone when
handover takes place.
Handover is the process of
transferring a wireless phone user
from one Access Point to another.
- Press key in Standby mode. Your
phone displays the main menu.
- Press key to select “5.Setting” and then
press key.
- Press key to select “1.User Setting” and
then press key.
- Press key to select “2.Talk” and then
press key.
- Press key to select “4.Handover Tone”
and then press key.
- Press key to select “1.Disable” or
“2.Enable” and then press “OK” soft key.
You can reach Handover Tone
menu by pressing following keys.
Go to Handover Tone menu:
Call Volume
Large
OK Back
TIP
TIP
HandoverTone
1.Disable
2.Enable
OK Back
TIP
NEC Infrontia Confidential