TRIPLE SWING ASSEMBLIES www.kbico.
INDEX Series Index/Company History Part Number Guide Triple Swing Unitized Body (Standard) Triple Swing Unitized Body (Short) Triple Swing Non-Standard Lie-Length Triple Swing Kit Triple Swing Economy Triple Swing Component Installation Guide Specifications & Warranty TSA TSS TSL TSK TSE TSI/TSO Page 2 3 4 5 6 7 8 9 10 11 COMPANY HISTORY Yesterday... In 1970 we started manufacturing specialty irrigation repair products at Kbi.
QUICK PART NUMBER GUIDE TSX - XXXX - X X TSA TSS TSL TSK TSE = = = = = Standard 0500 0750 1000 1250 1500 Dual Size 05073 1012 1210 1215 1512 TRIPLE SWING SERIES Standard Length - Unitized Short Length - Unitized Long Length - Specify Length1 Kit Assembly (Add Sch 80 Pipe) Economy Swing Assembly2 SIZES AVAILABLE Inlet = 1/2” x = 3/4” x = 1” x = 1-1/4” x = 1-1/2” x Outlet 1/2” 3/4” 1” 1-1/4” 1-1/2” Inlet Outlet = = = = = 1/2” 1” 1-1/4” 1-1/4” 1-1/2” x x x x x 3/4” 1-1/4” 1” 1-1/2” 1-1/4” A B C R
STANDARD LENGTH UNITIZED BODY TSA SERIES Kbi TSA series are excellent for use under sprinkler heads anywhere a high quality installation is required. Allows sprinkler height and angle to be adjusted and protects against lateral or mainline damage. O-ring seals provide leak-free joints. Ideal for valve-in-head applications. • • • • • • • • • • Limited Lifetime Warranty. Full 360˚ adjustment / 3 planes. 315 psi @ 73˚ working pressure rating. Made of Sch80 HI-IMPACT PVC Type II material.
SHORT LENGTH UNITIZED BODY TSS SERIES Kbi TSS series are excellent for use under sprinkler heads anywhere a high quality installation is required but space is limited. Allows sprinkler height and angle to be adjusted and protects against lateral or mainline damage. O-ring seals provide leak-free joints. Ideal for valve-in-head applications. • • • • • • • • • • Limited Lifetime Warranty. Full 360˚ adjustment / 3 planes. 315 psi @ 73˚ working pressure rating. Made of Sch80 HI-IMPACT PVC Type II material.
NON-STANDARD LIE-LENGTH TSL SERIES Kbi TSL series are excellent for use under sprinkler heads when special lengths are necessary. Allows sprinkler height and angle to be adjusted and protects under head piping against damage. O-ring seals provide leak-free joints. Ideal for valve-in-head applications. Custom specified lie-length allows maximum control of application. • • • • • • • • • • • Limited Lifetime Warranty. Full 360˚ adjustment / 3 planes. 315 psi @ 73˚ working pressure rating.
KIT ASSEMBLIES TSK SERIES Kbi TSK field assembled kits allow for maximum versatility in installation. Allows sprinkler height and angle to be adjusted and protects lateral or mainline against damage. O-ring seals provide leak-free joints. Ideal for valve-in-head applications. Assembly can be made to any length at job site. • • • • • • • • • • • Limited Lifetime Warranty. Full 360˚ adjustment / 3 planes. 315 psi @ 73˚ working pressure rating. Made of Sch80 HI-IMPACT PVC Type II material.
ECONOMY SERIES TSE SERIES Kbi TSE provides maximum flexibility and protection for sprinkler heads with minimal cost. Allows sprinkler height and angle to be adjusted. Flexible design adds protection to lateral pipe against damage. Retrofit model adds extra inlet elbow to retrofit riser on either horizontal or vertical elbow. • • • • • • • • • Factory preassembled. Permanent and economical. Limited Lifetime Warranty. Full 3 way adjustable including height. 70 psi @ 73˚ working pressure rating.
COMPONENT & REPLACEMENT PARTS TSI/TSO SERIES Kbi Components available anytime a change or replacement is desired on TSA, TSS, TSL, or TSK series. Each assembly is ready to replace or add to existing triple swing assembly simply by removing existing component and carefully threading on the new component.
INSTALLATION Preparation: Plastic piping systems should be installed and operated in accordance with established design, standards and procedures for plastic pipe systems. Suitability for the intended service application should be determined by the installer and/or user prior to installation of plastic piping system. Prior to assembly, all piping system components should be inspected for damage or irregularities. Mating components should be checked to assure that tolerances and engagements are compatible.
SPECIFICATIONS AND STANDARDS ASTM D 1784 PVC (Poly Vinyl Chloride) Materials (Compounds). ASTM D 2467 PVC Plastic Fittings, Schedule 80. ASTM D 2846 PVC Plastic Fittings, Material & Dimensions ASTM F 1970 Testing standard for all products. NSF 14 Potable water product testing standard. (National Sanitation Foundation) Materials PVC: Produced with Hi-Impact PVC Type II, exceeding Type I in impact resistance. Acetal: Acetal Copolymer plastic.
Shipping Locations Springfield, OR Downers Grove, IL Commerce City, CO Charlotte, NC Valencia, CA Dallas, TX St. Augstine, FL Houston, TX = Indicates stocking locations King Bros. Industries The Choice of Professionals 29101 The Old Road Valencia, CA 91355 Tel: 1-800-325-9468 1-661-257-3262 Fax: 1-661-257-4320 www.kbico.