Tus neeg siv phau ntawv

- 64 -
Cursor measurements
Press the cursor key to switch on a cursor and show it in the display. Press the key again to switch the cursor
off.
Cursor measurements in normal mode
The cursor menu is described below:
Menu
Setting
Description
Type
Voltage
Time
Time&Voltage
Auto Cursor
Displays the cursor of the voltage measurement
Displays the timing cursor
Displays cursor of time and voltage measurement
Horizontal cursors are displayed as the intersections
of the vertical cursors with the waveform
Line Type
(time and voltage type)
Time
Voltage
Activates vertical cursor
Activates horizontal cursors
Window
(Wave Zoom Mode)
Main
Extension
Activates cursor in main window
Activates cursor in zoom window (HOR button)
Line
a
b
from
Move M-rotary knob to move line a
Move M-rotary knob to move line b
Move M-rotary knob to move line a and b at the same
time, as they are connected
Source
CH1 - CH4
Select the channel as source which is used for the
cursor measurement.
Follow the steps below to set a time and voltage cursor for channel 1:
1. Press the cursor key to open the menu.
2. Select Source as CH1.
3. Press the first menu field in the lower screen menu (H1) to change the setting to Time&Voltage. Two
blue dash lines for the horizontal voltage range and two blue dash lines for the vertical time range are
now displayed.
4. In the bottom menu, please select LineType as Time to activate the vertical cursors. If the line is
selected as "a" in the lower menu, turn the M-rotary knob to move the line to the right or left in the
display. If "b" was selected, move this line to the right or left with the M-rotary knob.
5. In the lower menu, please select LineType as Voltage to activate the horizontal cursors. If the line is
selected as "a" in the lower menu, turn the M-rotary knob to move the line up or down in the display. If
"b" was selected, move this line up or down with the M-rotary knob.
6. Press the horizontal control HOR to activate the wave zoom mode. In the lower menu under Window,
select Main for cursor control in the main window or Extension for cursor control in the zoom window.