Tus neeg siv phau ntawv

- 48 -
Data
M-knob and arrow keys for selection
End
Triggers on end frame of the data frame
Missing Ack
Triggers on missing ack (good message)
Bit Stuffing
Triggers on Bit-Stuffing Error
Fashion
Holdoff
Car
Normal
Single
Capture waveform even without trigger
Capture waveform with trigger
Capture waveform with trigger, then stop
Operating the function menu
The operating area of the function menu comprises 8 function menu keys: Measure, Acquire, Utility,
Autoscale, Save, Display and Help, as well as 3 instant selection keys: Autoset, Run/Stop, Single.
Sampling settings (sampling function)
Press the Acquire button; select Acyu Mode, Length or PERF Mode to set the sampling function.
Description of the Acqu Mode menu:
Menu
Setting
Description
Acqu Mode
Sample
General scanning mode.
Peak Detect
Used to detect interference peaks and
reduce interference
Average
4、16、64、128
Used to reduce random interference of any
kind with an optional number of averages.
Description of the Length menu:
Menu
Setting
Description
Length
1000
Selection of the recording length
10K
100K
1M
10M
20M
40M (Single CH)
Description of the PERF Mode menu:
Menu
Setting
Description
PERF Mode
8-bit
Set vertical resolution (A/D)
12-bit
If the sample rate is <=250MS/s, the ADC resolution is set to 12-bit by default.
If the sample rate is > 250MS/s, the ADC resolution is set to 8-bit by default.
If the sample rate is <250MS/s and only one channel is activated, the ADC resolution can be set to 8-bit or
12-bit.
Menu
Setting
Description
Interpl
Sinx/x
Use sine(x)/x interpolation
Use linear interpolation
x