Nature's Generator User Manual
Nature's Generator The Nature’s Smartest, Infinitely Expandable Generator System Contents Important Safety Instructions Warning Caution 1 1 2 Introduction Unpack Your Nature's Generator Get to Know Your Nature's Generator 3 3 4 Using Your Nature's Generator How to Recharge Your Nature's Generator How to Use Your Nature's Generator How to Read the LCD Display How to Use Your Nature's Generator Smart Key How to Expand the Capacity of Your Nature's Generator How to Maintain and Store Your Nature's Generat
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Take care of all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Do not block any ventilation openings. 7. Do not use near flammable gases or fumes or other apparatus that produce a large amount of heat. 8. Only use attachments/accessories specified by the manufacturer. 9. Use only with the cart specified by the manufacturer, or sold with the apparatus.
Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your Nature's Generator is in correct operating condition. Servicing These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Introduction Congratulations on your new Nature's Generator, a state-of-art generator that provides reliable power for emergencies, off grid living, or wherever power is needed. With Nature's Generator app NaturesPulse, you can proactively diagnose the system, track the usage and communicate the issues. Unpack Your Nature’s Generator 1. Nature's Generator 2. AC Power Cord (In the storage compartment) 3. Nature's Generator Smart Key 4. This user guide Visit Naturesgenerator.
Get to Know Your Nature’s Generator Front Panel AC Input: To connect the wall outlet using the included power cord or any household power extension cord. Solar Input: To connect with solar panel(s). This Anderson port is designed to be used with up to 200 watts of solar power. LCD Display: LCD display shows the information of the system. LCD Display Button: Press it to light up LCD display for 30 seconds. Main Power Switch: Turn on or off the main power of your Nature's Generator.
Back Panel Storage: For storing the power cord. Expansion cord: Daisy chaining fuses and Daisy chain connector. Visit Naturesgenerator.
Using Your Nature’s Generator How to Recharge Your Nature’s Generator Recharging from Solar 1. Place your solar panel where it will get as much direct sunlight as possible. While direct sunlight in always preferred, solar panels should be connected at all times to provide a consistent trickle charge to your battery. Solar panels will also send a charge to your unit while in hazy or overcast skies. 2. Insert solar panel plug into Solar Input port on the front of Nature's Generator.
How to Use Your Nature’s Generator 1. Press the Main Power Switch to turn on your Nature's Generator. USB port will be on automatically when Main Power Switch is on. 2. Press the AC Outlet Switch to turn on the AC outlets. When not using AC outlets, make sure to turn off AC outlet switch to conserve power. 3. You’ll know the port is turned on when the icon is illuminated on LCD display. 4. Plug in any of your device for power. Uninterrupted Power Supply (UPS) Mode 1.
How to Read the LCD Display Battery Bar: 5 segment battery bar indicates charge in 20% increments. Once your Nature’s Generator is fully recharged, all battery segments will remain solid. Wind Turbine Icon: Indicates that your Nature’s Generator is being recharged by wind turbine. Bluetooth Icon: Indicates that your Nature’s Generator is connected with your smart phone by the Nature’s Generator Smart Key. AC Outlet Icon: Indicates when the AC outlet switch is turned on.
How to Use Your Nature’s Generator Smart Key 1. Turn on the main power of your Nature's Generator. 2. Plug your Nature's Generator Smart Key to the top USB port with Bluetooth icon on its right side. 3. If you have not already done so, click App Store on your iPhone or Play Store on your Android Phone. 4. Search “NaturesPulse” app and install it. 5. After the app is installed, please follow the instructions on the app to register your account before you can log into the home page. 6.
Troubleshooting My Nature’s Generator won’t charge when I connect my solar panel to it. Please follow these steps. 1. Make sure the solar panel is pointed directly toward the sun. It is preferred to position the solar panel face the south. The solar panel may produce little or no power if it is positioned in shade. 2. Check the cable connection on Nature's Generator and make sure it fits tightly. 3. If the LCD lights up, but the battery bar is not running.
Technical Specifications Battery: Type: AGM Sealed Lead Acid Capacity: 60Ah (720Wh) Self-discharge: Recommend to recharge every 4 months Inverter: Output Power: 1800watt max Output wave form: pure sine wave Output voltage: 120V Output frequency: 60Hz Ports: USB Port: 5V, up to 3A (15W) 12V DC Port: up to 20A (240W max) Expansion Port: 200A fuse Charges: AC Charger: 90W AC Charger Indicator: red (charging) and green (charged) Solar Charger: 200watt Wind Charger: 300watt General: Dimensions: 18 x 12 x 15 in (4
Limited Warranty One Year Limited Warranty Huntkey USA Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosmetic damage • Damage due to acts of God, such as lightning strikes • Accident • Misuse • Abuse • Negligence • Commercial use • Modification of any part of the product • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Huntkey USA Inc.
V1.
Nature's Power Pod User Manual
Nature's Power Pod Contents Important Safety Instructions Warning Caution 1 1 2 Introduction Unpack Your Nature's Power Pod Get to Know Your Nature's Power Pod 3 3 4 Using Your Nature's Power Pod How to Recharge Your Nature's Power Pod How to Install Your Nature's Power Pod on Top of Nature’s Generator How to Connect Your Nature's Power Pod to Nature’s Generator How to Maintain and Store Your Nature's Power Pod 6 Troubleshooting 15 Technical Specifications 16 Limited Warranty 17 6 7 14 14
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Take note of all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Do not block any ventilation openings. 7. Do not use near flammable gases or fumes or other apparatus that produce a large amount of heat. 8. Only use attachments/accessories specified by the manufacturer. 9. Use only with the cart specified by the manufacturer, or sold with the apparatus.
Caution Damage requiring service Stop using the Nature's Power Pod and refer servicing to qualified service personnel under the following conditions: • If liquid has been spilled or objects have fallen into your Nature's Power Pod. • If your Nature's Power Pod has been exposed to rain or water. • If your Nature's Power Pod has been dropped or damaged in any way. • When your Nature's Power Pod exhibits a distinct change in performance. Cold weather Cold temperatures can impact Nature's Power Pod performance.
Introduction Congratulations on your new Nature's Power Pod, a great expansion to your Nature’s Generator. Unpack Your Nature’s Power Pod 1. Nature's Power Pod 2. Accessory Box 3. This user guide Visit Naturesgenerator.
Get to Know Your Nature’s Power Pod Front Panel LED Light Button: Press it to show the battery charge level. LED Lights: Each light indicates charge in 20% increments. Once your Nature's Power Pod is fully recharged, all LED lights will remain solid. 12V Port: 12V DC port is designed to provide up to 240 watts of power. Solar Input: To connect with solar panel(s). This Anderson port is designed to be used with up to 200 watts of solar power. Back Panel Expansion: Daisy chain connector.
Top Compartment Expansion cord: 35 inch long expansion cord. Visit Naturesgenerator.
Using Your Nature’s Power Pod How to Recharge Your Nature’s Power Pod Recharging from Solar 1. Place your solar panel where it will get as much direct sunlight as possible. While direct sunlight is always preferred, solar panels should be connected at all times to provide a consistent trickle charge to your battery. Solar panels will also send a charge your unit while in hazy or overcast skies. 2. Insert solar panel plug into Solar Input port on the front of Nature's Power Pod.
How to Install Your Nature’s Power Pod on Top of Nature’s Generator What is in the accessory box 1. Brackets 2. Bolts and nuts A: 16mm x 2pcs B: 25mm x 2pcs 3. Pod bar 4. Tools Visit Naturesgenerator.
Installing Procedures Step 1: Lift Nature's Power Pod and set it on top of Nature’s Generator. Make sure the feet of Nature's Power Pod sit between the handle and top case of Nature’s Generator. Visit Naturesgenerator.
Step 2: Remove two bolts from Nature's Power Pod with included Allen wrench. Put these two bolts aside for now as they will be reused in step 5. Visit Naturesgenerator.
Step 3: Put the brackets on the cart. Bracket will match up with the shape of the cart frame. Visit Naturesgenerator.
Step 4: Use type A bolts and nuts to secure the two brackets. Use wrench to hold the nuts and Allen wrench to tighten the bolts. A A Visit Naturesgenerator.
Step 5: Place pod bar on the top of Nature's Power Pod. Insert the bolts that were removed in step 2 by Allen wrench. Visit Naturesgenerator.
Step 6: Use type B bolts and nuts to secure the brackets and pod bar. Use the wrench to hold the nuts and Allen wrench to tighten the bolts. B Visit Naturesgenerator.
How to Connect Your Nature’s Power Pod to Nature’s Generator You can connect your Nature's Power Pod to your Nature’s Generator to extend the overall run time. 1. Open the top cover of the Nature's Power Pod, locate the expansion cable, and run the expansion cable out of Nature's Power Pod through the opening on the back of the Nature's Power Pod. 2. Locate Expansion Port on the back of your Nature’s Generator and open the rubber cover. 3. Connect the expansion cable to the expansion port. 4.
Troubleshooting My Nature’s Power Pod won’t charge when I connect my solar panel to it. Please follow these steps. 1. Make sure the solar panel is pointed directly toward the sun. It is preferred to position the solar panel face the south. The solar panel may produce little or no power if it is positioned in shade. 2. Check the cable connection on Nature's Power Pod and make sure it fits tightly. 3. If the LED lights up, but the battery bar is not running.
Technical Specifications Battery: Type: AGM Sealed Lead Acid Capacity: 100Ah (1200Wh) Self-discharge: Recommend to recharge it every 4 months Ports: 12V DC Port: up to 20A (240W max) Expansion Cord: 45 inches Charges: Solar Charger: 200watt Battery Level LED lights: 5 LED lights General: Dimensions: 18 x 12 x 15 in (47 x 30 x 38 cm) Operating temperature: 32-104 °F (0-40 °C) Storage Temperature: 23–111 °F (-5–45 °C) Weight: 92 lbs Visit Naturesgenerator.
Limited Warranty One Year Limited Warranty Huntkey USA Inc. warrants to you, the original purchaser of this new product, that the product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the original date of your purchase of the product (“Warranty Period”). This product must be purchased from an authorized dealer and packaged with this warranty statement. This warranty does not cover refurbished product.
What does the Warranty not Cover? This warranty does not cover: • Cosmetic damage • Damage due to acts of God, such as lightning strikes • Accident • Misuse • Abuse • Negligence • Commercial use • Modification of any part of the product • Damage due to incorrect operation or maintenance • Connection to an incorrect voltage supply • Attempted repair by anyone other than a facility authorized by Huntkey USA Inc.
V1.
How to Position the Solar Panel Flat Position (to mount the solar panel semi-permanently or during travel) Winter Position How to Use the Solar Panel Optional: To Double Charging Speed, Use the Parallel Connection Method Summer Position Connect the solar panel cable to the solar input port. You can use the four eyebolts to anchor the solar panel to the ground. You can use 6mm screw holes on four aluminum feet to mount the solar panel semi-permanently.
Power Transfer Kit User Manual
Power Transfer Kit Contents Welcome 1 Warning 1 Unpack Your Power Transfer Kit 2 Connect Your Power Transfer Switch to Nature’s Generator 3 Use Your Power Transfer Switch 4 FAQ 5 Limited Warranty 6
Welcome Congratulations on the purchase of your new Power Transfer Kit, a state-of-art power transfer kit that links your Nature’s Generator to your existing power circuits in your breaker panel. Please read these instructions thoroughly prior to use, then store this manual in a safe place for future reference.
Unpack your Power Transfer kit 1. Power Transfer Switch 2. Conduit 3. Cable Clamps 4. 12-foot-long Power Cord: 5. The Installation Manual from Reliance Controls and this User Manual Visit NaturesGenerator.
Connect Your Power Transfer Switch to Nature’s Generator Once the Power Transfer Switch has been successfully installed by a qualified electrician, you can now connect your Power Transfer Switch to your Nature’s Generator by using the included power cord. You can connect up to four circuits from your breakers into your Power Transfer Switch. You may select the most common used circuits like refrigerators, lights in hallway or bathroom, bedroom outlets and etc.
Use Your Power Transfer Switch Once you’ve connected the Power Transfer Switch to the Nature’s Generator you are now ready to continue powering your most needed items at home during loss of power. When you experience power loss simply follow these steps to continue powering your items: 1. Turn the Nature’s Generator Main Power Switch to ON (The LCD screen will turn on). 2. Turn the Nature’s Generator AC Switch to ON (The light above the AC outlets will turn green). 3.
FAQ Where shall I install the Power Transfer Kit? The size of Power Transfer Switch is 13 1/4 x 8 x 4 3/4 inches. The conduit is approximately 18 inch long with the clamps. It is recommended to install it in a close area to your breaker panel. Can I use Power Transfer Kit and Nature’s Generator to back up 220V? Unfortunately, it only works on 110V. It is not compatible with 220V.
Limited Warranty Please refer to the other manual about warranty information. Visit NaturesGenerator.
V1.