V1.1-M 1Jun2018 Hanging Solar Shed Light User Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Important Safety Information Thank you for choosing a Nature Power Product. Save the receipt and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. the distributor cannot be responsible for issues arising from modification. We strongly recommend this product not be modified and/or used for any application other than that for which it was designed.
Intended Use The 4-LED Solar-Powered Pendant Shed Light provides safety and security with the added benefit of remote control convenience. No electricity is required, making this light great for garages, sheds, barns and any area where electricity is unavailable or difficult to access. The included remote control allows you to activate the light at the touch of a button.
Assembly Instructions There are two ways to assemble the solar panel. Make sure to install the solar panel close enough to the light so that the wire can reach from the solar panel to its plug in on the lamp. Post or Pole Mounted 1. 2. 3. 4. Carefully remove all the fittings from the box. Setting the bracket screw to solar panel with Screw.(figure 1) Connect “L” shape screw and Bracket for solar panel and “U” Shape Screw.
Before Each Use Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause shorter runtimes. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a clean damp cloth. Do not use soap, solvents, or abrasives. Operating Instructions Before the light can operate to its full capacity, allow the unit to charge in sunlight for the solar panel wire connected to the light.
Maintenance Maintain the solar powered light by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures Maintenance Interval Maintenance Point Allow the solar panel to charge the light for 2 sunny days. First Use Observe the solar panel once installed for one day. Ensure that it is not shaded at any time during daylight. Observe the light once installed during the evening.
Failure Possible Cause The batteries are not charged. Corrective Action Ensure the solar panel is in a location where it will receive the maximum sunlight during daytime hours. Turn the light to the ON position and turn off the light by remote control, allow the solar panel to charge the batteries for 2 sunny days Clean the solar panel with a clean, damp cloth. The light does not turn on. Move the switch to ON or AUTO. The switch is in the wrong position.
Limited Warranty Nature Power warrants our products to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase. In the case of product defect, contact Nature Power customer service to receive troubleshooting. If defective part or unit should be returned, a Return Authorization Number must be issued by Nature Power and the defective part or unit should be returned to the authorized location at the purchasers’ expense.