Installation Guide

Planter
Start with a corner block (the corner block has a face on two
sides).
Lay out blocks going in both directions.
Square Planter will have 2 blocks both directions plus a
corner.
Rectangular Planter will have 2 blocks one direction and 5
blocks on the long side, plus a corner.
If needed, use a framers square at the corners to set the planter
square.
Level the blocks from front to back and side to side.
Blocks may need to be shifted slightly in order to get a tight fit
between all the blocks on the first course.
STEP 2 - First Row
STEP 1 - Level the Pad
Level an area of gravel or rock on compacted soil that is
approximately:
72” X 72” for Square Planter
72" x 120" for a Rectangular Planter
The leveling pad will be approximately 6” larger than the
planter.
INSTALLATION INSTRUCTIONS
Thank you for purchasing the Planter Kit from Natural Concrete Hardscapes! Our Planter Kit offers a
natural-looking stone profile sure to elevate the looks of any outdoor space.
TOOLS NEEDED FOR INSTALLATION:
**SAFETY FIRST! Before you dig, be sure to call your local utilities to mark any
underground cables and pipes in the excavated area.
9/16"Wrench
Level
Tape Measure
Caulking Gun
2 - 12oz Concrete Adhesive
Square or Rectangle
Shovel
6 Cubic Feet of Gravel
Square
Square Planter Rectangular Planter