Instructions / Assembly

2 Commerce Drive, Cranford, NJ 07016 www.nationaltree.com
SAVE THESE INSTRUCTIONS
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use.
When products are used in outdoor
applications, connect the product to a Ground
Fault Circuit Interrupter (GFCI) outlet. If one is
not provided, contact a qualified electrician for
proper installation.
• This seasonal use product is not intended for
permanent installation or use.
• Do not mount or place near gas or electric
heaters, fireplaces, candles or other similar
sources of heat.
• Do not secure the wiring of the product with
staples or nails, or place on sharp hooks or
nails.
• Unplug the product when leaving the house,
when retiring for the night, or if left unattended.
• Do not let lamps rest on the supply cord or any
wire.
• CAUTION: This is an electrical product – not a
toy! To avoid risk of fire, burns, personal injury
and electric shock, it should not be played with
or placed where small children can reach it.
• Do not use this product for other than its
intended use.
• Do not hang ornaments or other objects from
cord, wire or light string.
• Do not close doors or windows on the product or
extension cords as this may damage the wire
insulation.
• Never operate this product if the power cord or
plug is damaged.
• Use only manufacturer specified replacement
bulbs.
• Read and follow all instructions that are on the
product or provided with the product.
USE AND CARE INSTRUCTIONS
• When storing the product, carefully remove the
product from wherever it is placed, avoiding any
undue strain or stress on the product
conductors, connections, and wires.
• When not in use, store neatly in a cool, dry
location protected from sunlight.
Shaping
The product is shipped from the factory with the branch tips compressed to the center. Each
branch tip must be shaped to its proper position to give the product a natural look. This will
also bring the piece to its advertised dimension. The care and attention given to this final
process will result in a genuinely beautiful and appealing holiday decoration.
Shaping is done by gently grasping the branch tips and spreading them out away
rom the center. The BEFORE photo shows the product as it appears out of the box.
The AFTER photo shows how the product should look after proper shaping.
BEFORE AFTER
BEFORE AFTER
Bulb Replacement Instructions
1. Unplug light string from power source.
2. Pull up on the Base Lock™ unlatching the bulb from the
bulb socket. Gently pull the bulb straight out (Figure 1).
3. Before inserting the new bulb into socket,
make sure that the two wires on either side
of the the bulb base are straight up and flush
with the base (diagram at right).
4. Carefully insert new bulb into socket and
push down Base Lock until it snaps into
place (Figure 2).
Fig. 1
Fig. 2
Fuse Replacement Instructions
1. Unplug light string from power source.
2. Fuses are located in light string plug. Slide the fuse
access cover away from cord side (in direction of
arrow, Figure 3) exposing fuses.
3. Remove fuses from compartment and examine.
Replace burnt out fuse with new one.
4. Close fuse compartment by sliding access cover back
in towards cord side of plug (Figure 4).
Fig. 3
Fig. 4
Bulb Replacement Instructions (LED ONLY)
1. Unplug light string from power
source.
2. Pull up on the Base Lock™ unlatch-
ing the bulb from the bulb socket.
Gently pull the bulb straight out.
3. Carefully insert new bulb into socket
(bulb is keyed and only goes in one
way) and push down Base Lock until
it snaps into place.
Note: All products will need some amount of branch shaping before final display.
These products include small trees, porch bushes, teardrops, centerpieces and similar
items. Wreath and garland images are used below to illustrate this point.