Safety Data Sheets (SDS)

ManualsBrandsNational Gypsum ManualsBuilding materialsProForm® All Purpose Carton - Redimix

ProForm®

Ready Mix Joint Compounds

SAFETY DATA SHEET

SDS05002

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

ProForm® Joint Treatment Products & Ready Mix Joint Compounds

IDENTIFIERS

ProForm® All Purpose Joint Compound ProForm® Lite Blue™ Joint Compound

ProForm® All Purpose Heavy Viscosity Joint Compound ProForm® Lite Blue™ with Dust-Tech® Joint Compound

ProForm® All Purpose Machine Grade Joint Compound ProForm® Multi-Use Joint Compound

ProForm® All Purpose Orange Joint Compound ProForm® Taping Joint Compound

ProForm® All Purpose Texture Grade Joint Compound ProForm® Taping Lite Joint Compound

ProForm® Factory Built Housing Texture Grade Compound ProForm® Tinted Lite™ Joint Compound

ProForm® All Purpose with Dust-Tech® Joint Compound ProForm® Topping Joint Compound

ProForm® Concrete Cover Compound ProForm® Ultra Lite® All Purpose Joint Compound

ProForm® Lite Joint Compound ProForm® Lite with Dust-Tech®

Advantage™ All Purpose Joint Compound Advantage Lite™ Joint Compound

Easy Finish® Topping Compound Easy Finish® Joint Compound

OTHER MEANS OF IDENTIFICATION

Joint Compound, Taping Compound, Gypsum Board Finishing Compound

RECOMMENDED USE

All-purpose drying-type compounds used for nishing gypsum board products. Use per manufacturer’s recommendations.

RESTRICTIONS ON USE

Use in well-ventilated area and avoid breathing dust. Avoid skin contact.

MANUFACTURER/SUPPLIER DETAILS

ProForm Finishing Products, LLC

2001 Rexford Road

Charlotte, NC 28211

Website: proformnishing.com

EMERGENCY TELEPHONE NUMBER

Director Quality Services – National Gypsum Services Company

(704) 551-5820 - 24 Hour Emergency Response

National Gypsum Company is the exclusive service provider for products manufactured by ProForm Finishing Products, LLC.

SECTION 2: HAZARDS IDENTIFICATION

UNITED STATES (US)

According to OSHA 29CFR 1910.1200 (HCS)

GHS CLASSIFICATION OF THE SUBSTANCE OR MIXTURE

Carcinogenicity - Category 1A (H-350)

Specic target organ toxicity, repeated exposure – Category 1 (H-372)

Acute toxicity, inhalation - Category 4 (H-332)

Skin corrosion/irritation - Category 2 (H-315)

PICTOGRAM

SIGNAL WORD

Health Hazard

HAZARD STATEMENTS

H-350 May cause cancer.

H-332, 372 Harmful if inhaled. Causes damage to organs (lungs) through prolonged or repeated exposure.

H-315 Causes skin corrosion/irritation

PRECAUTIONARY STATEMENTS

Summary of content (6 pages)

PAGE 1
ProForm® Ready Mix Joint Compounds SDS05002 SAFETY DATA SHEET SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME ProForm® Joint Treatment Products & Ready Mix Joint Compounds IDENTIFIERS ProForm® All Purpose Joint Compound ProForm® All Purpose Heavy Viscosity Joint Compound ProForm® All Purpose Machine Grade Joint Compound ProForm® All Purpose Orange Joint Compound ProForm® All Purpose Texture Grade Joint Compound ProForm® Factory Built Housing Texture Grade Compound ProForm® All Purpose with Dus
PAGE 2
ProForm® Ready Mix Joint Compounds SDS05002 SAFETY DATA SHEET PREVENTION Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust. Use personal protective equipment as required. (See Section 8) Use engineering controls and wet methods to minimize dust. RESPONSE If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If on skin, wash with plenty of soap and water.
PAGE 3
ProForm® Ready Mix Joint Compounds SDS05002 SAFETY DATA SHEET UNUSUAL FIRE AND EXPLOSION HAZARDS Mixture poses no fire-related hazard. SPECIAL HAZARDS ARISING FROM THE MIXTURE None known. SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIREFIGHTERS A SCBA is recommended to limit exposures to combustion products when fighting any fire.
PAGE 4
ProForm® Ready Mix Joint Compounds SDS05002 SAFETY DATA SHEET PERSONAL PROTECTIVE EQUIPMENT/RESPIRATORY PROTECTION A NIOSH approved particulate respirator is recommended in poorly ventilated areas or if the PEL/TLV is exceeded. OSHA's 29 CFR 1910.134 (Respiratory Protection Standard) must be followed whenever work conditions require respirator use. EYE PROTECTION Safety glasses or goggles. SKIN Gloves, protective clothing and/or barrier creams may be utilized if conditions warrant.
PAGE 5
ProForm® Ready Mix Joint Compounds SDS05002 SAFETY DATA SHEET SKIN CORROSION/IRRITATION Not available SERIOUS EYE DAMAGE/EYE IRRITATION Not available SKIN SENSITIZATION Not available RESPIRATORY SENSITIZATION Not available SENSITIZATION Not available MUTAGENICITY Not available. CARCINOGENICITY Not available This product contains crystalline silica (quartz) as a naturally occurring impurity in some of the raw materials.
PAGE 6
ProForm® Ready Mix Joint Compounds SDS05002 SAFETY DATA SHEET SECTION 16: OTHER INFORMATION SDS PREPARED BY: ProForm Finishing Products, LLC 2001 Rexford Road Charlotte, NC 28211 (704) 551-5820 EFFECTIVE DATE CHANGE: January 20, 2021 KEY TO ABBREVIATIONS ACGIH American Conference of Governmental Industrial Hygienists CAS Chemical Abstract Services Number CFR Code of Federal Regulations DOT Department of Transportation EPA Environmental Protection Agency HEPA High Efficiency Particulate Air HCS Hazard Com