Let’s build the Jasper Storage Unit 5 MINU 85 SEMBL Y A S TE 8 SKU 71801 Scan me! Free Lifetime Warranty 23-0313
Ok, let’s get rolling What’s included Description This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods J I I D K A C E F L B H M G G H IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
What’s included cont. Description Qty Description Qty 1 1/4” x 1-3/16” Hex Button Head Bolt 6 17 Plastic Bracket 2 2 1/4” x 1-3/4” Hex Button Head Bolt 2 18 Non-drywall Wall Anchor 2 3 1/4” x 2-3/16” Hex Button Head Bolt 22 19 M3.
The goods 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 5 21
Step 1 It’s as easy as it looks! Attach the Magnetic Catches (23) to the Top Stretcher - Front (C) using the M3.5*15MM Screws (24). C 23 24 Step 2 Secure the Top Stretcher - Front (C) to the Left Side Panel (A) by tightening a 1/4” x2-3/16” Hex Button Head Bolt (3) through a Crescent Spacer (7).
Step 3 You’re getting the hang of this! Insert four more Wooden Dowels (10) to the Right Side Panel (B) and secure to the stretchers from Step 1 and 2.
Step 4 Secure the Bottom Panel (F) by inserting a Wooden Dowel (10) on all four corners then securing with a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 2-3/16” Hex Button Head Bolt (3). x4 8 10 3 9 5 6 F 9 1 5 6 x2 Tighten the bottom of the Bottom Panel (F) with a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 1-3/16” Hex Button Head Bolt (1). Do this twice in the corresponding predrilled holes.
Step 5 Attach two Bottom Leg Frame Stretchers (G) with a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 2-3/16” Hex Button Head Bolt (3).
Step 6 You’re a pro now! Use the Allen Key (9) to tighten a 1/4” x 1/2” Flat Washer (6), 1/4” x 3/8” Spring Washer (5), and 1/4” x 2-3/16” Hex Button Head Bolt (3) to attach the Bottom Legs (H) to the Bottom Panel (F).
Step 7 Tighten a 1/4” x2-3/16” Hex Button Head Bolt (3) through a Crescent Spacer (7) on all four corners of the Bottom Leg Frame Stretchers (G).
Step 8 Carefully flip the unit right side up and slide in the Back Panels (1).
Step 9 Attach the Top Panel (J) using two sets of Wooden Dowels (10) and two sets of 1/4” x 1/2” Flat Washers (6), 1/4” x 3/8” Spring Washers (5), and 1/4” x 1-3/16” Hex Button Head Bolts (1) on each side of the Panel. Secure the top of the Panel using a set of 1/4” x 1/2” Flat Washers (6), 1/4” x 3/8” Spring Washers (5), and 1/4” x 2-3/4” Hex Button Head Bolts (4).
Step 10 Carefully push in four Shelf Pins (15) at your desired shelf height.
Step 11 Place the Shelf (K) on top of the Shelf Pins (15) from Step 10, and secure using four M3*12MM Screws (16).
Step 12 Attach the two Hinges (13) to the Left (L) and Right (M) doors using four M3*15MM Screws (14) and a Phillips head screwdriver.
Step 13 Next, secure the Left (L) and Right (M) doors by tightening the Hinges (13) to the unit with four M3*15MM Screws (14).
Is your cabinet door looking crooked or unevenly spaced? Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action.
Step 14 Let’s add those finishing touches! Secure the Handles (11) onto the doors using two M3.5*15MM Screws (12) per Handle. 11 12 12 HELPFUL TIP: Adjust feet to balance cabinet.
Is your cabinet door looking crooked or unevenly spaced? (Cont.) If you’re still having trouble lining everything up, your next step should be to try to adjust the feet slightly to square up the cabinet & doors. Follow the illustrations below: If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is better aligned.
Step 15 Safety first! Let’s get this storage unit secured to the wall. Find where you want this storage unit to live and then mount the Plastic Bracket (17) to the wall using the provided Wall Anchors (18) or (22) and M4*50MM Screws (21). We recommend using a 5/16” drill bit.
Step 16 Secure the other Plastic Bracket (17) to the back of the storage unit using the M3.5*15MM Screws (19) and then secure the storage unit to the wall by looping the Plastic Tether (20) through both brackets. You did it! Time for a celebratory pizza? The answer to that is always yes! 17 19 19 17 17 20 Tether to the wall.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment, please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this product responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
