Let’s build the Vera Storage Unit SKU 71501 0 MINU SEMBL Y 10 A S TE 100 Scan me! Inspiration Digital Instructions Free Lifetime Warranty 22-1104
Ok, let’s get rolling What’s included Description 1 Top Panel 1 2 Left Side Panel 1 3 Right Side Panel 1 4 Shelf 1 5 Bottom Panel 1 6 Back Panel 1 7 Top Stretcher 2 8 Bottom Stretcher 1 9 Left Door 1 10 Right Door 1 11 Leg 4 12 Top Wood Cleat 2 13 Bottom Wood Cleat 2 This should be easy, just follow our instructions and you will be back to Netflix in no time.
The goods IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
What’s included Description Qty A M6*35MM Cam Bolt 18 B Φ15x12MM Cam Lock 18 C M8*30MM Wooden Dowel 23 D M3.5*14MM Screw 4 E M3*12MM Screw 4 F Allen Key 1 G M6*12MM Bolt 16 H Hinge 4 I Handle 2 J Shelf Pin 4 K M3*14MM Screw 4 L Magnetic Door Catch Plate 4 M M4*14MM Screw 24 N M6*25MM Bolt 8 O Magnetic Door Catch 2 P Metal Bracket (For Anti-Tip) 2 Q M6*30MM Wall Anchor 1 R M4.2*32MM Screw for Wall Anchor 3 S M4.
The goods A B C D E F G H I J K L M N O P Q R S T 5
Step 1 Alright, let’s get this thing fired up! Start by removing the bolts (N) and the Top Wood Cleat (12) and the Bottom Wood Cleat (13) on the Left Side Panel (3) using the provided Allen Key (F).
Step 2 Use the M6*25MM Bolts (N) to secure the Top Wood Cleat (12) to the Top Panel (1). Then take the M6*25MM Bolts (N) and use them to secure the Bottom Wood Cleat (13) to the Bottom Panel (5). Tighten to 70%.
Step 3 It’s cam bolt time! Push the M6*35MM Cam Bolts (A) into the pre-drilled holes on the Left Side Panel (2), Right Side Panel (3), Top Panel (1), and Bottom Panel (5). Push four Wooden Dowels (C) into the sides of the Top Panel (1) and secure a Magnetic Door Catch (O) on both the Top Panel (1) and Bottom Panel (5).
Step 4 Take the Top Stretchers (7) and secure it onto the Top Panel (1) using the Wooden Dowels (C) and Cam Locks (B). Step 5 We’re off to a great start! Begin to secure the Bottom Stretcher (8) to the Bottom Panel (5) using the Wooden Dowels (C). Finish by screwing in the M4.2*32MM Screw (R).
Step 6 Secure the Top Panel (1) and Left Side Panel (2) together using the M6*25MM Bolts (N) and the provided Allen Key (F). N N F 2 N 1 Step 7 Attach the Bottom Panel (5) to the Left Side Panel (2) using the M6*25MM Bolts (N).
Step 8 No this isn’t Deja-Vu! Twist on the Cam Locks (B) to fully secure the Bottom Panel (1) and (5) and Left Side Panel (2) together.
Step 9 You’re over halfway done! Carefully slide in the Back Panel (6).
Step 10 Attach the Right Side Panel (3) to the unit using the M6*25MM Bolts (N) and the provided Allen Key (F).
Step 11 Finish securing by twisting on the Cam Locks (B).
Step 12 Attach the Metal Bracket (P) with the M4.2*17MM Screw (S) on the back of the unit.
Step 13 How’s that snack? Attach the four Legs (11) to the Bottom Panel (5) using the M6*12MM Bolt (G). Make sure the included floor protectors are secure and level.
Step 14 Grab the Left Door (9) and Right Door (10) and follow these instructions for both: attach the Hinges (H) using the M4*14MM screws (M), attach the Handle (I) using the M3.5*14MM Screws (D), and attach the Magnetic Door Catch Plates (L) with the M3*12MM Screws (E).
Step 15 Secure the doors onto the unit by the Hinges (H) using the M4*14MM screws (M).
Is your cabinet door looking crooked or unevenly spaced? Then you’ve come to the right place. Follow the illustrations below to get your cabinet door aligned and ready for action. If your door is too low or too high… Loosen the height screws, then move the door up or down to make it level. Loosen the side-to-side screws, then screw counter-clockwise to make the gap wider or clockwise to close any gaps.
Is your cabinet door looking crooked or unevenly spaced? (Cont.) If you’re still having trouble lining everything up, your next step should be to try to adjust the feet slightly to square up the cabinet & doors. Follow the illustrations below: If the right door appears to be hanging low, you can adjust the adjustable leveler on the front right until the door is better aligned.
Step 16 Where were we? Time for the Shelf (4)! Twist on the Shelf Pins (J) at the desired shelf height. Tip from a friend to a friend: choose the highest option if you plan on storing beverages on the bottom shelf.
Step 17 Safety first! Start by drilling a hole into the wall where your unit will be secured. Next, push the M6*30MM Wall Anchor (Q) into the newly drilled hole then secure the Metal Bracket (P) to the wall with a M4.2*32MM Screw (R). Loop the Plastic Strip (T) through the Metal Bracket (P) attached to the storage unit and the one attached to the wall before pulling on the end of the Plastic Strip to tighten things up and secure them in place. You did it! Time for a celebratory pizza? We think so.
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle. Our way Their way Give us a call Re-package item Replacement Schedule pick up You Track package Replacement You We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later We want your Vera Storage Unit to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment please check our website at NathanJames.com/products Safe use of this product starts with you. Do not modify the structure of this product in any way. Use this storage unit responsibly with the primary concern for your safety.
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free. Warranty This product comes with a lifetime warranty from the date of purchase.
