Entice Series Manual

Table Of Contents

W415-2782 / B / 07.20.20

installation

D. Insert the appliance into the rough framing, and make sure the framing brackets ﬁt into the slotted holes

of the side trim (Fig. 3-9).

E. Secure two screws (supplied) through the two slot holes on each side of the appliance with the framing

brackets (Fig. 3-10).

Wall

Reverse view of appliance

in place (framing hidden

for clarity)

Fig. 3-9

Fig. 3-10

C x 4

Repeat on

opposite side.

Framing hidden

for clarity.

Framing

Bracket

Slotted

Hole

Slotted

Hole

F. Reinstall the side holding brackets previously removed in step B.

G. Install media (see “crystal ember installation” section).

H. Reinstall front glass (see “front glass removal / installation” section).