Instructions / Assembly

USE AND MAINTENANCE

Use on level surfaces only

Because this product needs assembly, it is prone to working itself

loose from time to time depending on the use. Please take the time to

check that all connections are ﬆill tight and working properly

Only clean using a damp cloth and mild detergent, do not use bleach

or abrasive cleaners.

N AOM I

Snow Frosted Christmas Tree

PART LIST

Assembly Instructions

If you need help or have damaged or missing parts, contact customer service at www.NaomiHome.com Made in China

HOME

3 - The Buttom Section Of The Tree ×1

2 - The Middle Section Of The Tree ×1

4 - Stand x 1

6 - Leaf ×1

1 - The Top Section Of The Tree ×1

5 - Branch × 1

1.Carefully remove the tree set from its package. Set the 4 metal stand on a level

floor, ensure it is cross-shaped for firm standing.Set the bottom section of the tree to the stand.

Screw the eyebolt through the hole of metal tube to ensure secure connection.

2.Shape the 5 on the bottom section of

your tree. Some tree styles have “side branches”

attached to the main branch stem that require

additional shaping.

3.Insert the 1 into the 2 into the 3. Shape the

branches the

same way as you have done for the 3.

Insert the tree top shape the leaves to a natural look.

After shaping the complete tree the

finished look should be natural and full. Your tree

is ready to be decorated.

Congratulations! Setup of your new

Naomi Home Snow Frosted Christmas

Tree is Complete!

PAGE 1
USE AND MAINTENANCE Use on level surfaces only Because this product needs assembly, it is prone to working itself loose from time to time depending on the use. Please take the time to check that all connections are ﬆill tight and working properly Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners. N A O M I H O M E Snow Frosted Christmas Tree PART LIST Assembly Instructions A 4 1 1 - The Top Section Of The Tree ×1 1.Carefully remove the tree set from its package.