PRECAUTIONS AND STANDARDS Before using the thermostat read this instructions carefully. After reading the instructions, keep this manual in a safe place and hand for future reference. Ww ARN The system and thermostat must be installed by qualified and authorized personnel, « The system an thermostat does not contain pairs that can be repaired by the user. For repairs, always consul authorized service personnel.
INSTALLATION MS, MS y M825 RECOMMENDED LOCATION ON WALL For proper work of the thermostat, it must be installed considering the following recommendations: B} Do nof place near a heat or cold current. C) For a better experience installing the thermostat at A) Do not place near a heat or cold source. Hz18m height of 1.6 netters. -.
FEATURES MS Backbit tactile thermostat with hourly programming M520. Wireless communication or Cable (RF or CABLE). Reprogramming hourly or manual control. Two installation possibilities, fixed on wall {RF or CABLE) or desktop installed with base (RF). Customization “Sleep” function. Customization menu: Ranges and customization temperature limits, Master Yes/No delectable by zone, stop total system mend installer/user, adjust aperture grilles... Integrated temperature probe. SharePoint temperature at 0.
REI IoR e pol hal 1 THERMOSTAT ON AND OFF Press (icon to turn ON or tum OFF thermostat. NOTE: The thermostat is OFF when “OFF” icon is displayed. The thermostat is ON when a "WORK MODE” icon is displayed. 2 WORK MODE CHANGE. The thermostat can have 2 or § working modes depending on whether the installation is only for ventilation or has a combined stage for underfloor heating. 1. Press a (3 icon to tum on the thermostats and show the available working modes. Usually only appears heal mode and cold mode. 2.
Rely seraglio Ln obis LR a This function it’s for mire or countdown to OFF thermostat. The thermostat have this timed cycles: 30/60/90/120 minutes. To set up this function, press &) icon in some working mode or direly in "Functions menu”. The display wil show "0030", equivalent to 30 minutes, next to the text "TIMER" in the upper left comer. Each press on icon wil increase the timed cycle. To cancel the Timer, press and hold icon until the minute digits disappear ang the text "TIMER" disappears.
FUNCTIONS M820 ci RR ee WARNING. THIS FUNCTION CAN NOT BE USED IF THE INSTALLATION DOES NOT HAVE THE TOTAL CONTROL MODULE GANGWAY AND THE THERMOSTAT 18 NOT CONFIGURED FOR THAT. With thermostat off, press oO fon, or if the thermostat is at rest, press anywhere gn display to aces “functions menu”. Next to the Cooling loon will appear fan icon 3 Each teems the rie icon is pressed, the fan sped will change between the right of the clock icon, the selected fan speed is marked manually.
BC ORR[e CF ra F Only underfloor refreshing. GC Only underfloor heating. OFF Thermostat off, grill closed. The remaining minutes are also displayed for the thermostat fo tum off automatically when the timer is running. Seem Sped Fan. A Automatic. F Fan speed fixed. 23 Low speed. Mid speed. Eight speed. Modal sped. QFF Total system stop. it also shows the set point temperature and the actual temperature. FF1/FF2 Errors in the mode of operation of the installation. FF3/ FF4 FFs Day of the week: 1 Monday.
FEATURES MS Thermostat with digital display and keys Ms. With cable communication. Can be placed in 70 mm. universal box. Customization menu: ranges and customization temperature limits, teacher Yes/No delectable by zone, system total stop, system mend industrialize, adjust aperture grilles, Selection of 5 operating modes between Cold Alr, Hot air, underfloor heating, Cold Air + underfloor refreshing and Hot air + underfloor heating. Adapt aesthetically with sll the mechanisms of the market, factory order.
BUN Riel oR Loy 1 TURN ON J TURN OFF. THE THERMOSTAT Turn On/ Tum off the thermostat. Press key to turn On or Off the thermostat. 2 CHANGE WORKING MODE. The thermostat can have 2 or 5 working modes depending on whether the installation is only for ventilation or has a combined stage for underfloor heating. 1. Press (1) key to tum on the thermostat. 2. "00" It is the thermostat current working area. 3. The display shows the last selected working mode, press “M7 key to select other working mode.
FUNCTIONS MS Lie Lee Re Yee The thermostat's display show information regarding the status of the communication with the central control unit. Description of codes in data transmission: OF Thermostat OFF. Grill closed. C Only underfloor heating. F Only underfloor refreshing. CO Entry in the configuration many, ES {Wait) Saving tads. Ed Sending data to central system control. Rd Receiving data from the system control unit. FF Write error in memory. 00 Grill closed by set point.
FEATURES M325 Thermostat with keys and digital display 828. Cable or wireless communication (RF or CABLE). Two installation possibilities, fixed on wall (RF or CABLE) or desktop installed with base (RF). Customization “Sleep” function by user 30/80/90/120 minutes. Customization menu: Ranges and customization temperature limits, Master Yes/No delectable by zone, Total System Stop, system menu Installer/User, adjust aperture grilles. Integrated temperature probe. Pointless temperature at 0.5°C intervals.
FUNCTIONS MS 1 TURN ON J TURN OFF THERMOSTAT. Tun On/ Tum OF thermostat. Press key to turn ON or tum Off the thermostat. 2 CHANGE WORKING MODE. The thermostat can have 2 or § working modes depending on whether the installation is only for ventilation or has a combined stage for underfloor heating! refreshing. 1. Press (1) key to turn on the thermostat. 2. Momentarily the display shows "00°, tis the thermostat current working area. 3.
BC ORR[e CE ra Lig This function is for timer or countdown to OFF thermostat, The thermostat have this timed cycles: 30/60/90/120 minutes. To activate “Timer” function, Press & key, in some working mods. The display will show "030", equivalent to 30 minutes. Each press on (2) key will increase the timed cycle. To cancel the Timer, press and hold 7) key until the minute digits disappear.
WARRANTY POLICY GENERAL TERMS OF WARRANTY. By means of the present, Materials and Industrial Supports of Levant S.L.
mvs MATERIALS VY CORTESES Mo. DE. LEVANT SLL. Cf Mayor 27, 30148. : MURCIA (PANES) [x] i=] Tlf: + 34 086744473 H rare FAX: +34 886741928 iC WWW.mysair.es =] dad Se www. aghrl.