User's Manual

ManualsBrandsmuze ManualsAudio EquipmentBT Earbuds

1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES.

2. Do not use your earphones near water. Clean using a dry or slightly moist

cloth.

3. Do not place your earphones on any wet surfaces.

4. Do not allow children or the infirm to play with your earphones without adult

supervision.

5. Do not expose your earphones to excessive heat, flames or fire.

6. Always press all buttons carefully. Do not manhandle your earphones.

7. Do not use in extremely dry environments, as this can lead to static

discharge during usage.

8. Do not expose your earphones to temperatures above 40°C. Keep out of

direct sunlight.

9. Do not attempt to repair this product yourself. Contact a qualified service

center if your earphones are in need of service.

10. Do not drop, puncture or expose your earphones to excessive trauma.

11. Your earphones are not intended for commercial use.

12. Do not place near objects that generate a strong magnetic field.

13. Use only the supplied charging cables. Unplug this device when not in use

for long periods of time or during lightning storms.

14. Use a soft cloth to clean your earphones. Never use any harsh chemicals

or detergents. Make sure your earphones are dry before charging.

15. Please recycle or dispose of your earphones properly based on the laws

and rules of your municipality. Contact local recycling facilities and/or the

manufacturer of your earphones for further information.

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in

material or workmanship. Your product will be repaired or replaced at no charge for parts or labor

for a period of one year.

What Is Not Covered by Warranty

Damages or malfunctions not resulting from defects in material or workmanship and damages or

malfunctions from other than normal use, including but limited to, repair by unauthorized parties,

tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 in the U.S. or visit our website at www.vivitar.com.

To receive Warranty service along with the name and address of an authorized product service

center, the original consumer purchaser must contact us for problem determination and service

procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the

product is within the applicable Warranty period(s), MUST be presented in order to obtain the

requested service. It is your responsibility to properly package and send any defective products

along with a dated copy of proof of purchase, a written explanation of the problem, and a valid

return address to the authorized service center at your expense. Do not include any other items or

accessories with the defective product. Any products received by the authorized service center

that are not covered by warranty will be returned unrepaired.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.

Important Safety Precautions Vivitar One Year Warranty

FCC Statement

Controlling Music

NEXT TRACK

LAST TRACK

Tap the Next Track Button to

advance to the next track in a

playlist.

Tap the Last Track Button to

return to the last track in a

playlist.

VOLUME +

VOLUME -

Press and hold the Volume +

Button to increase the volume.

Press and hold the Volume -

Button to decrease the volume.

Earphones

MUZ3003 I USER’S MANUAL

Specifications

Charging

Bluetooth Pairing

Using Your Earphones

A Quick Look

Bluetooth Specification: Bluetrum 5.0

Bluetooth Range: Up to 33 feet (10 meters)

Battery Type: 55mAh, 3.7V, Polymer Lithium Ion Battery

Charge Time: Approximately 2 Hours

Play Time: Approximately 3.5 hours*

*Applicable at 50% of maximum volume. Results will be

lower when volume is higher.

Charging Port

Microphone

Power/Play/Pause/Answer/Voice Assistant

LED Indicator Light

1. The included USB charging cable has

a Micro USB plug and a standard USB

plug.

2. Insert the USB charging cable’s Micro

USB plug into the charging port on your

earphones.

3. Insert the USB charging cable’s standard

USB plug into the USB port of a computer or

suitable USB charging adapter.

4. The LED indicator light turns red while the

earphones are charging then turns blue once

charging is complete.

1. Press and hold the power button to

power on your earphones.

2. The LED indicator lights will alternately

flash red and blue to indicate that your

earphones are in pairing mode.

3. Go to the Bluetooth settings menu on your

phone. Make sure that Bluetooth is turned on.

Connect to the device listed as “MUZ3003.”

4. The LED indicator lights will slowly flash blue to

indicate that your earphones are paired with

your phone.

Micro USB

Plug

USB

Plug

(red) = Charging

PLAY/PAUSE ANSWER

(blue) = Charging Complete

3-4 SEC

PRESS & HOLD

1. Press and hold the power button to

power on or power off your earphones.

2.Press the PLAY/PAUSE button to play

or pause a track.

3. Press the ANSWER button to answer or end

a phone call. Press and hold the ANSWER

button to reject a phone call.

4. Press and hold the VOICE ASSISTANT button

1 seconds to activate Siri or Google Voice

Assistant.

Pairing Mode

Red & Blue Flashing LED

Paired

Blue Slowly Flashing LED

MUZ3003

The Bluetooth® word mark and

logos are registered trademarks

owned by the Bluetooth SIG, Inc.

and any use of such marks by Sakar

International is under license. Other

trademarks and trade names are

those of their respective owners.

Last Track/Volume -

Next Track/Volume +

VOICE ASSISTANT

3-4 SEC

PRESS & HOLD