Instructions / Assembly

WF200 Polypropylene Black Woven Stabilization Barrier
Suggested Installation Instructions:
1. Prepare the install area. Remove any brush from the top layer of soil. Fill in any
open holes with fill.
2. Smooth and level the subgrade. The area should be flat before continuing.
3. Place geotextile in the installation area. The barrier should be stretched as tight
and as flat as possible.
4. When using more than one roll, overlap adjacent rolls a minimum of 12 inches.
5. Secure the fabric in place with staples or pins. Barrier should be secured along the
edges and then along any overlapping portions.
6. Loosely place fill directly on the geotextile.