Specification

E. L. Mustee & Sons, Inc.
5431 West 164th Street
Brookpark, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com
1-Piece, Molded Construction — made with white
DURASTONE
®
24"x24"x10"
Integrally Molded Center Drain with a seal
Connects to 3" Iron Steel Pipe
Easy to Install
Code Accepted
DURASTONE
® Mop Basins meet or exceed performance requirements:
IAPMO® Listed — file numbers: Shower Floor — #1453; Drain — #1251 and #1635
American National Standards Institute (ANSI) — Specification 124.6
Warnock Hersey Listed — CSA test standards: Mop Basin — #B45.0 and #B45.5
SPECIFICATIONS
Model No. Size UPC
63M 24"x24"x10" 6 71031 00189 4
Sectional View Plan View
General: Furnish and install as shown on plans, Mop Service Basin model 63M, as manufactured
by E.L. Mustee & Sons, Inc. Unit to be one-piece molded fiberglass made with matched metal
molds using extreme heat and pressure. Height shall be 10" with not less than 1" wide shoulder.
Size 24"x24". Drain shall be integrally molded, complete with drain seal for installation of 3" ABS,
PVC (Sch. #80) and iron pipe. Removable stainless steel strainer. Performance tested to meet or
exceed ANSI Specifications Z 124.2, Z 124.6. Weight 45 lbs., cubic feet 4.2. Install in compliance
with local codes.
Accessories — order se
p
aratel
y
...
Part No. Descri
p
tion
63.600A
Service Sink Faucet
65.700
Hose and Hose Holder
65.600
Mo
p
Han
g
er
63.401
Bum
p
er Guards
67.2424
DURAGUARD
™ Wall Guards
65.308 Drain Seal
65.311 Drain Seal