Dimensions Guide

FILLER
PANELS
MOUNTING BRACKET
FLOOR
1-1/2” LEVEL
ADJUSTMENT
FloorWall
34
"
APPROX.
14
3
/
8
"
34
"
APPROX.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
E-mail: [e-mail]. • Web: www.mustee.com • Proudly made in the USA
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
Patents pending. Made and Printed in U.S.A.
27F and 27W UTILATWIN
®
Laundry/Utility Tubs — Premier
Design features:
 High strength, one piece molded construction
 Produced with Mustee’s proprietary structural thermoplastic resins and
innovative cellular molding process creating extreme strength & durability
 Includes Twin-Drain Waste connector which joins drain assemblies to
assure rapid and uniform waste water discharge…includes washers, slip
nuts and stoppers.
 Divider wall between tubs is recessed one inch, permitting water to
overfl ow from one tub to other, prevents water spilling onto fl oor.
 Large, self-draining back shelf with retainer curb that prohibits water run-
off except into tub.
 19 Gallon capacity per tub, extra deep 13” tubs with smooth surfaces
 Connects to standard 1½” P or S trap
 Accommodates single or dual-handle faucets. 4” or 8” centers
 Floor model includes heavy gauge steel legs with adjustable levelers
 Wall model includes wall mounting bracket, side supports and mounting
hardware for securing tub to concrete or stud wall
 Mold and mildew-resistant components
 Easy to assemble and install
 Color-fast white fi nish
Code Accepted:
UTILATUB® and UTILATWIN® Laundry/Utility Tubs meet or exceed performance requirements as listed:
 International Association of Plumbing and Mechanical Offi cials (IAPMO)® Listed
 Warnock Hersey® (Canada) Listed—CSA test standards: Laundry Tray - #B45.0 and #B45.5; Drain - #B125
 American National Standards Institute (ANSI)—Specifi cation Z 124-2011
General: Furnish and install as shown on plans, UTILATWIN® Twin Laundry/Utility
Tub model____(27F, 27W), as manufactured by E.L. Mustee & Sons, Inc. Tub shall
be one-piece molded construction using structural thermoplastics with matched
metal molds under extreme heat and pressure. Tub to include integrally molded
drains, twin drain waste coupling, recessed divider wall between tubs and twin
drain assembly for connection to standard 1-1/2” P or S-trap, stoppers and wall
mounting hardware or heavy gauge steel legs with built-in levelers. 19 gallon
capacity per tub, each tub 13” deep. Shall meet ANSI Z 124-2011. Color: White.
Weight: 27F 40 lbs.; 27W 40 lbs.
Colors & Models: Model Mounting H x W x D UPC
White 27F Floor 34” x 40” x 24” 6 71031 00057 6
White 27W Wall 34” x 40” x 24” 6 71031 00058 3
Specifi cations
SEE PAGE 2 FOR A LIST OF