Instructions / Assembly

IMPORTANT SAFETY INSTRUCTION

CAPACITY: 6.5 CFT.

DO NOT operate if any part is damaged or broken.

DO NOT use on steep inclines where tipping may occur.

NOT FOR USE BY CHILDREN.

Big washer, 2pcs

Lock pin, 2pcs

M6*50 bolts and

nuts, 5pcs

M6*30 bolts & nuts,10pcs

M6*25 bolts & nuts,6pcs

Small nut

Small washer

U shape

frame,1pc

M shape

frame,1pc

Connect frame, 2pcs

Extended part

Connect bar

L shape frame, 2pcs.

The right one has a

threaded bolt at the

short end.

Axle

Wheels, 2pcs

Back fence, 1pc

Side fences, 2pcs

Bottom bed, 1pc

PAGE 1
M6*50 bolts and nuts, 5pcs M6*30 bolts & nuts,10pcs Big washer, 2pcs M6*25 bolts & nuts,6pcs Small nut Small washer Lock pin, 2pcs Connect bar U shape frame,1pc Extended part Axle Connect frame, 2pcs Extended part M shape frame,1pc L shape frame, 2pcs. The right one has a threaded bolt at the short end. Wheels, 2pcs Back fence, 1pc IMPORTANT SAFETY INSTRUCTION Side fences, 2pcs Bottom bed, 1pc CAPACITY: 6.5 CFT. DO NOT operate if any part is damaged or broken.
PAGE 2
Step 1. Put the L shape frames on the floor, the right frame has a thread bolt on the short end, then make the axle put through the L shape frames. Step 2. Slide wheels onto the axle. Step 3. Tighten with big washer and lock pin on each side. Step 4. Put the bottom bed on L shape frame. Step 5. Assemble one connect frame on back side of cart, which is under the bottom bed. Here, we will use M6*30 bolts and nuts, 2pcs. Step 6.