User manual

Getting started
1.12
Attach the paper-handling parts
1.
Attach the document tray by inserting
it into the appropriate holes, as shown.
2.
Attach the Multipurpose tray
by inserting its two pegs at a
slightly upward angle into
the appropriate holes, as
shown.
3.
Attach the paper tray by
inserting its two pegs at a
slightly upward angle into
the appropriate holes, as
shown.
Attaching an optional handset
You may purchase an optional handset for your fax machine. Here is how to attach
the handset.
Important:
Do not
connect the handset directly to a telephone
wall
socket. Instead,
connect it only to your fax, as these instructions describe.
1.
Remove the two screw caps and
screws.
2.
Using a Phillips-head
screwdriver, attach the
handset cradle to the rear
side of your machine, using
the screws included with
the cradle.
3.
Plug one end of the handset
cord (it’s curled) into the
PHONE
1
socket on the left of
your machine.
4.
Plug the other end of the
handset cord into the socket
on the handset. If connected
to a phone line, your fax
machine is now “off-hook.”
Note: The handset has a
small “flash” button
which you can press
while holding the
handset, putting the
fax machine back “on-
hook” until you can hang up the handset properly in step 5.