Technical Manual

TLA 852/FLA 872
TM1205 Issue 2Page 2 - 6
2.2.4 Archive
a) General
The operator can use this option to archive received messages and also to view
messages in the archive store.
b) Archiving Messages
Select the required message and view the complete message by pressing the
O> button. After the last screen of the message is displayed, push the Í or
theÌ button to choose the archive symbol.
When the archive symbol flashes, push the O> button. The display shows the
archive symbol plus a flashing
?. Push the O> button again to transfer the
message to the archive memory.
If the archive is full, the ‘memory full’ symbol will flash. A message must
be deleted from the archive memory before the new message can be saved.
c) Viewing Archived Messages
To view the messages in the archive memory select the archive symbol on the
options screen and push the O> button. Push theÌ button to select the most
recent message. Push the Í or theÌ button to scroll through the messages.
If the message is more than one screen long push the O> button to display the
next screen.
NOTE: If there are no information services available in the unit, push theÌ
button to select the archive directly from the standby screen.
To return to the standby screen, push and hold the O> button for one second
or wait for the unit to time-out and show the standby screen.
2.2.5 Alarm
The alarm can be set to operate once at any time in a twenty four hour period. To
set the alarm, first select the alarm function on the option screen as shown in
paragraph 2.2.3.
Use the ¬ or - buttons to choose the alarm ON or alarm OFF symbol.
When the alarm is set to OFF, the symbol shows and the alarm time is not
shown.