User's Manual

PS7060 MULTIQUIP SAW • OPERATION MANUAL — REV. #2 (06/02/08) — PAGE 17
All MULTIQUIP PS7060 saws are designed, engineered and
manufactured with strict adherence to American National
Standards Institute, Inc. (ANSI) guidelines B7.1 and B7.5.
Water System
All PS7060 saws provide a hardy water plumbing system that
evenly distributes water volume and optimum flow rate to both
sides of the blade to keep it cool when cutting. The basic water
system provides a valve that connects to a standard garden hose.
The water is delivered (via a hose) to the saw blade.
Engine
The PS7060 saw is classified in the industry as a "high" powered
saw. This classification is particularly useful when selecting the
proper cutting tool (blade) for an application.
The PS7060 saw is powered by a liquid cooled, 3 cylnder,
turbocharged diesel engine rated at 60.2 HP (44.9 kW) at 3,000
RPM. Blade rotation is belt driven. Wheel Drive system is driven
by a hydrostatic transmission consisting of a variable
displacement pump and two fixed displacement wheel motors.
Refer to the
Engine Owner's Manual for specific instructions
regarding engine operation and maintenance practices.
Intended Use
This saw is not intended for dry cutting.
■ Engine Stop Switch conveniently located on Operators
Control Panel.
■ Console mounted with Vibration Control System.
■ Chassis cold-formed welded box construction.
■ Oil lubricated Blade Shaft Bearings - no lubrication
requirements.
■ Oil Bath design, fully enclosed cast iron housing.
■ Quick Disconnect Blade Flange system; inner flanges
mounted to shaft.
■ Blade mounting Left side or Right side.
■ Saw position guide helps ensure straight cuts
■ Dual water lines directly deliver water to blade.
■ Slip-On, tapered mount Blade Guard for ease of removal
and installation.
■ Blade Raise-Lower by electro-hydraulic pump.
■ Belt Drive tension automatically controlled by hydraulic
tensioning system.
■ Dual Filter Element Air Filter with integral turbo pre-cleaner.
■ Hydro-gear hydrostatic transmission pump.
■ Hydro-gear hydrostatic wheel motors.
■ Travel Speed up to 84 MPM (meters per minute)/ 275 FPM.
■ Automatic actuating parking brake.
■ Optional Night Light.
Features
Operate the PS7060 MULTIQUIP SAW, tools and components
in accordance with the manufacturer's instructions. Use of any
other tools for stated operation is considered contrary to
designated use. The risk of such use lies entirely with the user.
The manufacturer cannot be held liable for damages as a result
of misuse.
PS7060 MULTIQUIP SAW — INTENDED USE / FAMILIARIZATION
■ Stay-Level handlebar system adjusts handlebar angle
automatically.