OPERATION AND PARTS MANUAL BA-SERIES WALK-BEHIND TROWEL Revision #6 (07/06/10) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL— TABLE OF CONTENTS Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Training Checklist ...................................................... 6 Daily Pre-Operation Checklist ................................... 7 Safety Message Alert Symbols .............................. 8-9 Rules For Safe Operation ...............................
www.multiquip.com BA-SERIES TROWEL— PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com.
BA-SERIES TROWEL— TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and gearbox fluid level.
BA-SERIES TROWEL— DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine Oil Level. 2 Gearbox Fluid Level. 3 Condition of Blades. 4 Blade Pitch Operation. 5 Safety Kill Switch Operation. 6 Clutch Operation COMMENTS: BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the MultiQuip BA-SERIES WALK-BEHIND TROWEL.
BA-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. NOTE This walk-behind trowel, other property, or the surrounding environment could be damaged if you do not follow instructions.
BA-SERIES TROWEL— RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the BA-Series walk-behind trowel. SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
BA-SERIES TROWEL— RULES FOR SAFE OPERATION ■ DO NOT operate this trowel unless all guards and safety devices are attached and in place. See Pages 16 and 17. ■ ALWAYS use proper lifting techniques when moving the trowel. ■ ALWAYS check to make sure that the operating area is clear before starting the engine. ■ ALWAYS test the safety kill switch devices before operating the trowel. ■ NEVER place your feet or hands inside the guard rings while starting or operating this equipment.
BA-SERIES TROWEL— OPERATION AND SAFETY DECALS Machine Safety Decals The BA-Series walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. CAUTION WARNING! DO NOT LIFT MACHINERY BY GUARD RING.
BA-SERIES TROWEL— SPECIFICATIONS (TROWEL) Side View Figure 2. BA-Series Trowel Dimensions Table 1. BA-Series Trowel Specifications A– Height (Lifting Hook) 34.5 in (876.2 mm) B– Height Engagement Lever) 41.1 in (1,044.2 mm) 46.0 (1,168.4 mm) C–Width 75.2 (1,910.1 mm) D–Length Weight – Operating See Table 3 Sound Pressure 97 db Vibration 2.5g (24.5 m/s2) Ring Diameter 46 in (117 cm) Number of Blades 3 or 4 Blade Tip Speed – FPM (m/s) 1,478 fpm (7.5 m/s) Rotor – RPM (Gasoline) 60 to 125 Path Width – in.
BA-SERIES TROWEL— SPECIFICATIONS (ENGINES) Table 2. Specifications (Engines & Electric Motor) Model HONDA GX240K1QA2 ROBIN EH-25-2 Electric Motor Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine N/A Bore X Stroke 2.90 in. X 2.30 in. (73 mm x 58 mm) 2.95 in. X 2.24 in. (75 mm x 57 mm) N/A Displacement 14.81 cc 15.31 cc N/A 8.0 H.P./3600 R.P.M. 8.5 H.P./4000 R.P.M. 2.0 HP Approx. 1.59 U.S.
BA-SERIES TROWEL— GENERAL INFORMATION BA-Series Walk-Behind Trowel Familiarization Blades This walk-behind trowel is designed for the floating and finishing of concrete slabs. The blades of the trowel finish the concrete as they are rotated around the surface. Blades are classified as combination (8 inches wide), float (10 or 8 inches wide), and finish (6 inches wide).
BA-SERIES TROWEL— CONTROLS AND COMPONENTS 4 5 3 6 2 1 QUICK PITCH ™ HANDLE 7 8 R O T A IC D B IN H IS IM IN R F C O O B M T O D MB A CO O L E R J 13 P F H IS IN 4 9 W 5 11 3 6 2 20 12 15 Figure 3. BA-Series Walk-Behind Trowels 7 8 STANDARD HANDLE 13 14 W 18 10 16 17 PAGE 16 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL— CONTROLS AND COMPONENTS Figures 3 shows the location of the basic controls or components, for the BA-Series trowel. Listed below is a brief explanation of each control or component 1. Quick Pitch™ Control Handle – To adjust the pitch of the blades, grasp the handle then squeeze and either move the handle forward or backward to achieve the desired blade pitch. 2.
BA-SERIES TROWEL— BASIC ENGINE HONDA engine shown. Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. 1. 5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. 6.
BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section provided general instructions on how to install those components. Instruction sheet P/N 20485 provides further details for the handle assembly. Handle Tube Installation (All Models) 1. Install the handle tube to the gearbox as shown in (Figure 5).
BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Figure 9. Throttle Cable Connection (ROBIN) 4. Tighten cable clamp screw and swivel stop screw. 5. After the cable has been installed on the engine, adjust and tighten operator position of the handle to lock the throttle cable at the proper length. 6. Adjust cable tension by rotating the barrel adjuster. (Figure 10) Figure 11. Engine Kill Wire Connection Pitch Cable Installation 1.
BA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Pre-load Adjustment (Quick-Pitch™ Models Only) 2. 3. 4. Lock the spring in the compressed position, by releasing the blade pitch adjustment trigger, (Quick-Pitch™ model). Remove one brass set nut from the blade pitch cable end as shown in (Figure 14). 1. After the Quick-Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required. 2. Locate the adjustment screw on the underside of the handle tube (Figure 16).
BA-SERIES TROWEL— PRE-INSPECTION CAUTION NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the trowel. NEVER place hands or feet inside the guard rings while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel. Figure 17. Engine Oil Dipstick (Removal) 3.
BA-SERIES TROWEL— PRE-INSPECTION Blade Check Explosive Fuel Fuel Check Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running. 1. Remove the gasoline cap located on top of fuel tank. 2. Visually inspect to see if fuel level is low. If fuel is low, replenish with unleaded fuel. 3. When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel.
BA-SERIES TROWEL — INITIAL START-UP CAUTION The trowel is heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT lift the trowel by the guard rings. Lifting the Trowel Onto a Slab. Auxiliary Lifting Tube Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox (Figure 21) from the handle. Make sure that the hole in the tube engages with the pin in the socket.
BA-SERIES TROWEL — INITIAL START-UP 3. Place the centrifugal kill switch (Figure 24) in the "ON" position. For models that use this feature. CAUTION NEVER disable or disconnect the centrifugal kill switch. It is provided for the operators’ safety and injury may result if it is disabled, disconnected or improperly maintained. Figure 26. Starter Grip 6. If the engine has started, slowly return the choke lever (Figure 25) to the CLOSED position. If the engine has not started repeat steps 1 through 5.
BA-SERIES TROWEL — OPERATION The following steps are intended as a basic guide to machine operation, and are not to be considered a complete guide to concrete finishing. We suggest that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit, Michigan. Read the “Training” section of this manual for more information. Pitching The Blades Quick Pitch Handle 1.
BA-SERIES TROWEL — OPERATION Figure 32 below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel. The trick is to let the trowel do the work. Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area. Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided. The best way to get accustomed to the trowel is repeated use.
BA-SERIES TROWEL — OPTIONS Clip-On Float Blades (Optional) Blades NOTE Blades should be changed when they fail to Specification and part number finishare concrete in atosatisfactory manner. subject change without notice. Blades are a vital part of finishing concrete. This trowel, or finisher, has been designed to finish concrete and the blades are built to stringent quality standards out of the finest trowel steel.
BA-SERIES TROWEL — OPTIONS Grinding Attachments Trowel Arm Adjustment Tool Available grinding attachments are used for grinding surface imperfections or joints.These attachments allow greater utilization of your trowel. Figure 36 illustrates a typical grinding disk assembly, complete with hub and stone mounting plate. If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted.
BA-SERIES TROWEL — MAINTENANCE NOTE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. At the front of the book (Page 7) there is a “Daily Pre-Operation Checklist ”. Make copies of this checklist and use it on a daily basis. Trowel Arm Adjustment Procedure NOTE The following procedure should be followed to adjust trowel arms when it becomes apparent that the trowel is finishing poorly or in need of routine maintenance.
BA-SERIES TROWEL — MAINTENANCE 2. Start engine, and bring trowel blades up to full speed and look for the following conditions: ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? Spider Removal b. Loosen the jam nut and cone point square head set screw, and carefully lift the upper trowel assembly off of the spider assembly.
BA-SERIES TROWEL — MAINTENANCE 3. Should the trowel arm inserts (bronze bushing ) come out with the trowel arm, remove the bushing from the trowel arm and set aside in a safe place. If the bushing is retained inside the spider plate, carefully remove the bushing. 4. Examine the bronze trowel arm bushing insert (Figure 44), clean if necessary. Replace bushing if out of round or worn. Trowel Arm Flatness Test 1.
BA-SERIES TROWEL — MAINTENANCE Trowel Arm Adjustment Shown in Figure 47 is the adjustment fixture with a trowel arm inserted. As each trowel arm is locked into the fixture, the arm bolt is adjusted to where it contacts a stop on the fixture. This will consistently adjust all of the trowel arms, keeping the finisher as flat and evenly pitched as possible. 1. Locate the trowel arm adjustment tool P/N 1817.
BA-SERIES TROWEL — MAINTENANCE 11. Carefully lift the upper trowel assembly, line up the keyway on gear box main shaft and insert into spider assembly. 12. Reinstall square head cone point into spider plate and tighten in place. Tighten jam nut. Use care in making sure point of set screw engages groove in gear box main shaft. 13. Lubricate all grease points (zerk fittings) with premium "Lithum 12" based grease, conforming to NLG1 Grade #2 consistency. Testing 1.
BA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety kill switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Kill switch malfunction? Make sure that the kill switch is ON or replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine.
BA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING (CONTINUED) SYMPTOM Clutch slipping or sluggish response to engine speed change. POSSIBLE PROBLEM SOLUTION Worn V-belts? Replace V-belt. Dir ty centrifugal clutch? Disassemble and clean clutch. Defective or worn out centrifugal clutch? Replace entire clutch. Hand clutch out of adjustment? Adjust per instructions in maintenance section of this manual. Worn or defective hand clutch p a r t s? Replace par ts as necessary.
BA-SERIES TROWEL — TROUBLESHOOTING (ENGINE) TABLE 7. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". Difficult to star t, "fuel is available, and SPARK is present at the spark plug". Difficult to star t, "fuel is available, spark is present and compression is normal" Difficult to star t, "fuel is available, spark is present and compression is low" POSSIBLE CAUSE SOLUTION Spark plug bridging? Check gap, insulation or replace spark plug.
BA-SERIES TROWEL — EXPLANATION OF CODES IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT.............
BA-SERIES TROWEL — SUGGESTED SPARE PARTS BA-SERIES TROWEL 1 TO 3 UNITS WITH HONDA GX240K1QA2ENGINE. 1 to 3 Units Qty. ........ P/N .............................. Description 2 ............ 20856 .................... SAFETY SWITCH 1 ............ 20285 .................... CABLE STANDARD HANDLE 1 ............ 20297 .................... CABLE QUICK-PITCH™ 1 ............ 20435 .................... THROTTLE LEVER W/CABLE 4 ............ 1157 A .................. BUSHING 4 ............ 1162 A ..................
BA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATES AND DECALS 3 2 4 1 QUICK PITCH ™ HANDLE 5 O 9 R MB O CO T A IC D B IN 8 IM IN R F T O D MB A CO O L E R J H IS 6 P F IN H IS 7 W 12 10 STANDARD HANDLE 11 13 14 15 16 W 19 17 18 PAGE 40 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 * 9 PART NO. 1758 12405 20527 20526 2942 1736 1735 11246 10 11 12 * 13 14 * 15 * 16 17 18 19 1940 11092 11246 1492 11247 11246 1261 1848 2938 11246 12620 * PART NAME QTY. REMARKS DECAL: QUICK-PITCH™ HANDLE 1 2 DECAL: QUICK-PITCH™ HANDLE INSERT DECAL: QUICK-PITCH™ WARNING 1 DECAL: QUICK-PITCH™ LATCH WARNING 1 DECAL: MQ WHITEMAN 13" 1 DECAL: ARROWS 1 DECAL: PRE-LOAD INDICATOR 1 DECAL: OIL CHECK 1 NAMEPLATE ..................
BA-SERIES TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. 40 3 21 5 7 4 8 6 9 10 22 18 DETAIL “A” 17 43 16 11 14 42 15 19 2 20 44 SEE DETAIL “B” 21 22 1 12 3 13 24 23 SEE DETAIL “A” 39 27 30 31 25 26 41 32 38 12 3 37 33 2 36 28 1 35 29 DETAIL “B” 34 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. 3 CABLE IS ATTACHED TO THROTTLE AND SEALED AT THE FACTORY. ORDERABLE AS A UNIT ONLY.
BA-SERIES TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. NO. 1 2 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 11 12 13 14 15 16 17 18 19 20 21$ 22$ 23 24 25# 26# 27# 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42■ 43■ 44■ PART NO. 20463 20774 20818 20817 0281 20282 0122C 3615 1478 20478 12556 20435 20439 1492 20438 0786 0786A 20287 20285 20856 1602 20988 20514 1662 20275 1118 20279 21017 1493 12567 2942 20434 20845 1116 10133 20392 20280 20819 20301 20421 A8638 PART NAME QTY.
BA-SERIES TROWEL — QUICK-PITCH™ HANDLE ASSY. QUICK-PITCH ™ T-HANDLE 2 3 25 55 4 1 20 19 5 18 26 21 14 DETAIL “A” 22 58 3 6 10 24 25 17 SEE DETAIL “A” 7 8 26 16 9 10 60 23 59 27 15 11 SEE DETAIL “B” 28 11 54 46 12 48 13 30 45 49 29 57 50 31 3 6 51 47 2 32 43 44 33 1 34 52 42 38 DETAIL “B” 40 41 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. 3 CABLE IS ATTACHED TO THROTTLE AND SEALED AT THE FACTORY.
BA-SERIES TROWEL — QUICK-PITCH™ HANDLE ASSY. QUICK-PITCH HANDLE NO. 1 2 3 4 5 6 7 8 * 9 * 10 * 11 * 12 * 13 * 14 15 16 17 18 19+ 20+ 21+ 22+ 23+ 24 25$ 26$ 27 28 PART NO. 20463 20774 20478 12556 20526 20435 20527 20389 1746 12405 1729 1706 20437 4568 1711 1719 20439 20438 1731 20443 1709 20269 20276 20856 1602 20988 20514 20297 PART NAME QTY. REMARKS GRIP, HANDLE RIGHT 1 COVER, PAD HANDLE 1 GRIP, HANDLE LEFT 1 HANDLE, ADJUSTABLE 1 DECAL, LATCH WARNING 1 THROTTLE, J-B 1 DECAL, Q.P.
BA-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE 2 3 25 55 4 1 20 19 5 26 21 14 18 DETAIL “A” 22 58 3 6 10 24 25 17 SEE DETAIL “A” 7 8 26 16 9 10 60 23 59 27 15 11 SEE DETAIL “B” 28 11 54 46 12 48 13 30 45 49 29 57 50 31 3 6 51 47 2 32 43 44 33 1 34 52 42 38 DETAIL “B” 40 41 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. 3 CABLE IS ATTACHED TO THROTTLE AND SEALED AT THE FACTORY.
BA-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58■ 59■ 60■ PART NO. 1736 1718 1732 1717 12642 1758 20845 20434 20392 10133 1116 20390 20293 20280 20421 A8638 20271 PART NAME QTY. REMARKS DECAL, ARROW 1 NUT, QP TRIM CTRL ADJ 1 BOLT, STRIPPER 3/8 X 1/2 1 SCREW, QP TRIM ADJUSTMENT 1 TUBE, MAIN HANDLE 1 DECAL, PATENT QP 1 SWIVEL, ENGINE THROTTLE CABLE 1 HOUSING, THROTTLE CABLE 74” 1 DECAL, CAUTION, LIFT HANDLE .........................
BA-SERIES TROWEL — THRUST BEARING KIT ASSY. THRUST BEARING KIT ASSEMBLY. PAGE 48 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — THRUST BEARING KIT ASSY. THRUST BEARING KIT ASSEMBLY. NO. 1 * 2 * 3 * 4 * 5 * 6 PART NO. 12208 12778 10793 1471 1154A 10968 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR W/BUSHING 1 BUSHING 1 LOWER WEAR PLATE 1 THRUST BEARING KIT .................................................... 1............ INCLUDES ITEM W/ * BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — 4-BLADE SPIDER ASSY. 4 BLADE SPIDER ASSY. PAGE 50 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — 4-BLADE SPIDER ASSY. 4 BLADE SPIDER ASSY. NO. 1 * 2 * 3 * 4 * 5$ 6$ 7$ 8$ 9$ 10$ 12$ 13$ 14$ 15$ 16$ 17$ 18$ 19$ 20$ 21 22 23 24 # * PART NO. 12208 12778 10793 1154A 1157A 0164B 1875 1876 0105 0161C 2827 1163 4164 1316 1161 1322 1456 1167A 0166A 1490 1162A 10968 1471 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR ............................................................. 1 ...........
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. 1 2 1 35 3 4 8 5 4 6 12 13 39 34 38 7 9 40 11 7 6 14 2 10 31 36 37 15 17 32 16 18 30 6 19 20 33 GEARBOX REQUIRES 22 OZ. OF LUBRICATING OIL FOR OPERATION. 18 31 43 QTY. 1 19 32 GEARBOX OIL 22 0Z. 22 21 41 23 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT. 4 SHIM AS NECESSARY FOR 0.005 TO 0.010 INTPUT SHAFT ENDPLAY. 5 SHIM AS NECESSARY FOR 0.
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. NO. 1% * 2% 3% 4% * 5% PART NO.
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. 1 2 1 35 3 4 8 5 4 6 12 13 39 34 38 7 9 40 11 7 6 14 2 10 31 36 37 15 17 32 16 18 30 6 19 20 33 GEARBOX REQUIRES 22 OZ. OF LUBRICATING OIL FOR OPERATION. 18 31 43 QTY. 1 19 32 GEARBOX OIL 22 0Z. 22 21 41 23 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT. 4 SHIM AS NECESSARY FOR 0.005 TO 0.010 INTPUT SHAFT ENDPLAY. 5 SHIM AS NECESSARY FOR 0.
BA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. NO. 36 36 36 37 37 37 37 38 39 40 41 42 43 PART NO. 1958 1965 20536 1964 20954 20545 20558 1247 1245 20407 21046 21047 10139 PART NAME QTY. REMARKS FRONT ENGINE MOUNT (HONDA) 1 FRONT ENGINE MOUNT (ROBIN) 1 FRONT ENGINE MOUNT (BRIGGS) 1 REAR ENGINE MOUNT (HONDA 8HP) 1 REAR ENGINE MNT. (HONDA W/HAND CLUTCH) 1 REAR ENGINE MOUNT (ROBIN) 1 REAR ENGINE MOUNT (BRIGGS) 1 GROMMET 1/4 X .
BA-SERIES TROWEL — ENGINES, HONDA, ROBIN, BRIGGS & STRATTON ENGINES, 8 HP HONDA, 8 HP ROBIN, & 8 HP BRIGGS AND STRATTON ASSY. PAGE 56 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — ENGINES, HONDA, ROBIN, BRIGGS & STRATTON ENGINES, 8 HP HONDA, 8 HP ROBIN, & 8 HP BRIGGS AND STRATTON ASSY. NO. PART NO. PART NAME 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 28 1387 20469 1256 0310 0250 0252 0251 0458 B1766 0855 0253 1868 0456 0261 1127 1335 0181B 2577 0300B 0161C 10181 1391 ENGINE 8HP HONDA 1 ENGINE 8HP BRIGGS & STRATTON 1 ENGINE 8HP ROBIN 1 SQUARE KEY 1/4X1/4X1.1/2" 1 AUTOMATIC CLUTCH ASSY. 1" BORE ...... 1 ............. INCLS.
BA-SERIES TROWEL — HAND CLUTCH ASSY. HAND CLUTCH ASSY. 1 2 13 4 3 4 6 10 5 9 25 24 12 26 23 7 22 21 14 4 20 19 11 1 8 8 16 17 16 18 15 SEE GEARBOX AND ENGINE 1 MOUNTS ITEM 36 PAGE 52. PAGE 58 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — HAND CLUTCH ASSY. HAND CLUTCH ASSY. NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1387 10036 6014C 0300B 10181 10450 0310 0181B 1672 10936 10971 2469 1512 10831 10833 0730 0262 1127 10229 0161C 10898 10281 10935 20981 13351 10822 ENGINE DRIVE ASSY. 8 HP HONDA 1 CLUTCH ASSIST HANDLE ASSY. 1 HEX FINISH NUT 5/16-24 1 FLAT WASHER 5/16” 5 SCREW, HHC 5/16-24X1.1/4” 1 SHSS 10-32X1/4” 1 KEY, CLUTCH 1/4 x 1/4 x 1.
BA-SERIES TROWEL — GUARD RING ASSY. GUARD RING ASSY. PAGE 60 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — GUARD RING ASSY. GUARD RING ASSY. NO. PART NO. PART NAME 1 2 2 20797 1489 1490 STATIONARY GUARD RING 1 SPIDER PLATE ASSY 16-1/2" ARM (EXT) .......................... 1 ............ 3-BLADE MODEL SPIDER PLATE ASSY 16-1/2" ARM (EXT) .......................... 1 ............ 4-BLADE MODEL QTY. REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — STABILIZER RING ASSY. STABILIZER RING ASSY. SEE DETAIL “A” 5 4 DETAIL “A” 1 4 3 1 1 2 1 APPLY LOCTITE 242 BLUE OR EQUIVALENT. PAGE 62 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — STABILIZER RING ASSY. STABILIZER RING ASSY. NO PART NO PART NAME 1 2 3 4 5 5 0161C 1237 1723 6014C 1482 1483 QTY. REMARKS WASHER, LOCK, 5/16 MED 4 SCREW, SCH 5/16-18 X 7/8, NYL, NP 4 ROD END, 5/16-24 MALE 4 NUT, HEX FINISH 5/16-24 8 RING, STABILIZER, 14-1/2" ARM .............. 1 ............. 3-BLADE MODEL, REPLACES P/N 1234 RING, STABILIZER, 14-1/2" ARM .............. 1 ............. 4-BLADE MODEL, REPLACES P/N 1235 BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY. (OPTIONS) BLADES & ADJUSTMENT FIXTURE ASSY. PAGE 64 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY. BLADES & ADJUSTMENT FIXTURE ASSY. NO. PART NO. PART NAME 20 20 21 22 22 23 24 26 27 28 28 29 30 31 32 33 34 35 36 39 39 40 40 41 42 44 46 47 48 49 50 0202 0201 1434 1162A 1482 1483 6014C 1237 0490 0487 0489 0488 0166A 1723 QTY. REMARKS COMBO FLOAT & FINISH BLADE .......................... 3,4 ...... CONTACT UNIT SALES DEPT./ACCESSORY ITEM ENDURO COMBO FLOAT &FINISH BLADE .......... 3,4 ...... CONTACT UNIT SALES DEPT./ACCESSORY ITEM FLOAT BLADE .......
BA-SERIES TROWEL — LIFTING BALE ASSY. (OPTION) LIFTING BALE ASSY. (OPTION) PAGE 66 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
BA-SERIES TROWEL — LIFTING BALE ASSY. (OPTION) LIFTING BALE ASSY. (OPTION) NO. PART NO. PART NAME 1 2 3 4 5 6 7 8 10229 0161C 0205 1394 0166A 1897 QTY. REMARKS LIFTING BALE ASSY. ................................. 1 ............. CONTACT UNIT SALES DEPT./ACCESSORY ITEM HHCS 5/16-24X1" 4 LOCK WASHER 5/16" 4 LIFTING BALE ASSY. ................................. 1 ............. CONTACT UNIT SALES DEPT.
HONDA GX240K1QA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 68 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 5 6 8% 9% 10 13 14 15 PART NO. 16271ZE2000 17210ZE2822 17218ZE2505 17231ZH9820 17232891000 17238ZE2310 17239ZE1000 17410ZE2020 90325044000 90009ZE2003 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER, DUAL ............. 1 ............. INCLUDES ITEMS W/ * FILTER, OUTER 1 COVER, AIR CLEANER 1 GROMMET, AIR CLEANER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW COMP., AIR CLEANER ............... 1 .........
HONDA GX240K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 70 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 PART NO. 14100ZE2W01 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSY. ................................... 1 ............. INCLUDES ITEMS W/ * ROD PUSH 2 ARM VALVE ROCKER 2 LIFTER VALVE 2 PIVOT ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN. 1 VALVE, EX.
HONDA GX240K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 72 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 %+ * 2 * 3 * 5 * 6 + * 7 * 8 * 9 10 * 11 * 12 * 13 * 14 15 16 17 18 19 * 20 * 21 * 22 * 23 * 24 25■ 26 26 26 * 27 * 28 * PART NO.
HONDA GX240K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 74 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 1 2 3 4 5 8 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 19 20 21 24 * 26 * 27 PART NO. 16550ZE2700 16551ZE2000 16555ZE2000 16561ZE2000 16562ZE2000 16570ZE2W20 16571ZE2W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE2W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050280A 93500050160A 9405006000 PART NAME QTY.
HONDA GX240K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 76 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 2 3 4 5 8+ 9% 10 * 11 $ * 12 $ * 13 $ * 14 * 15 * 16 * 17 18 * 19 * 20 21 * 22 * PART NO. 11400ZE2601 11381ZE2801 15600ZG4003 15600735003 15625ZE1000 15625ZE1003 16510ZE2811 16511ZE2000 16512ZE2811 16513ZE2000 16531ZE2000 90473147000 90602ZE1000 90701HC4000 91201890003 9410106800 957010803500 961006202000 961006206000 PART NAME QTY. REMARKS COVER ASSY., CRANKCASE .................. 1 .............
HONDA GX240K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 78 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 8 10 12 * PART NO. 13320ZE2601 13351ZE2010 90745ZE2600 961006206000 PART NAME QTY. REMARKS CRANKSHAFT COMP., Q- TYPE .............. 1 ............. INCLUDES ITEMS W/ * WEIGHT, BALANCER 1 KEY 6.3 X 6.3 X 43 1 BEARING, RADIAL BALL 6206 1 BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 80 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 3 6 7 8 * 11 12 14 * 15 16 PART NO. 12000ZE2834 16541ZE2010 90131896650 90446KE1000 91201890003 9410912000 9425110000 961006202000 90013883000 34150ZH7003 PART NAME QTY. REMARKS CYLINDER ASSY., BALANCER + OIL ALERT ...... 1 .......... INCLUDES ITEMS W/ * SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER 8.2 X17X0.
HONDA GX240K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 82 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 15 16 17 17 17 17 PART NO. 12200ZH9000 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE2800 12310ZE2020 12391ZE2020 14775ZE2010 90014ZE2000 90042ZE2000 92900080320E 90441ZE2010 9430112200 950051100130M 957011008000 9807955846 9807955855 9807956846 9807956855 PART NAME QTY. REMARKS CYLINDER HEAD COMP. ....................................... 1 ..........
HONDA GX240K1QA2ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 84 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 4 5 7 9 PART NO. 16731ZE2003 19610ZE2010ZC 19631ZE2D00 32197ZH8003 36100ZH7003 90013883000 90684ZA0601 PART NAME CLIP, TUBE COVER COMP., FAN *NH1* BLACK SHROUD SUB-HARNESS SWITCH ASSY., ENGINE STOP BOLT, FLANGE 6X12, CT200 CLIP, WIRE HARNESS QTY. 1 1 1 1 1 6 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 86 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 7 8 PART NO. 19511ZE2000 28450ZE2W11 31100ZE2010 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY COMP., STARTER, SCREEN GRID FLYWHEEL COMP. NUT, SPECIAL 16MM KEY, SPECIAL WOODRUFF 25X18 QTY. 1 1 1 1 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 88 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 8 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE2020ZD 17620ZH7023 17631ZH7003 17672ZE2W01 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK COMP., FUEL *NH1*, BLACK 1 CAP COMP., FUEL FILLER .................................... 1 ..........
HONDA GX240K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 90 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 6 8 11 PART NO. 30500ZE2023 30700ZE1013 31512ZE2000 36101ZE1010 90015883000 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH 370MM BOLT, FLANGE 6X28 QTY. 1 1 1 1 2 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 92 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 7 8 10 11 12 13 14 PART NO. 18310ZE2W00 18320ZE2W01 18323ZE2W00 18330ZE2W00 18331ZE2810 18333ZE3800 18355ZE2010 18381ZE2W10 90013883000 90050ZE1000 90055ZE1000 90050ZE1000 9405008000 PART NAME MUFFLER COMP. PROTECTOR COMP., MUFFLER PROTECTOR, EX. PIPE PIPE, EX. CAP, MUFFLER GASKET, EX. PIPE ARRESTER, SPARK GASKET, MUFFLER, ARRESTER BOLT, FLANGE 6X12 CT200 SCREW, TAPPING 5X8 SCREW, TAPPING 4X6 SCREW, TAPPING 5X8 NUT, FLANGE 8MM QTY.
HONDA GX240K1QA2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 94 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZE2013 13011ZE2013 13012ZE2013 13013ZE2013 13101ZE2W00 13102ZE2W00 13103ZE2W00 13104ZE2W00 13111ZE2000 13200ZE2000 13200ZE2305 90001ZE8000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON, STD. 1 RING SET, PISTON, OS 0.25, OPTIONAL 1 RING SET, PISTON, OS 0.50, OPTIONAL 1 RING SET, PISTON, 0.75, OPTIONAL 1 PISTON, STANDARD 1 PISTON, OS 0.25, OPTIONAL 1 PISTON, OS 0.50, OPTIONAL 1 PISTON, 0.
HONDA GX240K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 96 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * 13 * 14 PART NO. 28400ZE2W01ZB 28410ZE2W01ZB 28421ZE2W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZE2W11 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1*, BLACK ................... 1 ....... INCLUDES ITEMS W/ * CASE COMP.
HONDA GX240K1QA2 ENGINE — LABELS LABELS PAGE 98 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
HONDA GX240K1QA2 ENGINE — LABELS LABELS NO. 1 3 5 16 PART NO. 87521ZE2W01 87522ZH9000 87528ZE2810 87532ZH8810 PART NAME EMBLEM, INTERNAL LABEL, CAUTION MARK, CHOKE, EXTERNAL MARK, OIL ALERT, E QTY. 1 1 1 1 REMARKS BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CRANKCASE ASSY. CRANKCASE ASSY. PAGE 100 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CRANKCASE ASSY. CRANKCASE ASSY. NO. 10 20# 30 * 40 * 45 * 50 * 60# 80 90 210 220+ 230+ 235+ 250 260 270 PART NO.
ROBIN EH25-2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 102 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 10 40 50 60 70 210 310 320 * 350 360 370 380 PART NO. 2542090101 0230300170 0230300180 0230300190 0021808000 0032018000 0323030010 2542410103 2542250100 2462300103 2702330103 2702340103 2702340203 2702340303 2542350107 2542350207 2542350307 0565180010 PART NAME QTY. REMARKS CRANKSHAFT CP ..................................... 1................... SAE 1” KEYED SHAFT SPACER T=0.6 ........................................... 1...................
ROBIN EH25-2 ENGINE — INTAKE AND EXHAUST ASSY. INTAKE AND EXHAUST ASSY. PAGE 104 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — INTAKE AND EXHAUST ASSY. INTAKE AND EXHAUST ASSY. NO. 10 35 * 36 * 37 * 50 60 70 80 90 95 210 220 230 240 260 310 320 340 350 360 363 365 430 440 445+ 500 505% 510 -2 -3 510 -2 -13 -520 520 540 555 556 560 570 580 650 PART NO.
ROBIN EH25-2 ENGINE — GOVERNOR ASSY. GOVERNOR ASSY. PAGE 106 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — GOVERNOR ASSY. GOVERNOR ASSY. NO. 10 20 30 40 50 60 70 80 310 320 * 330 * 340 345 346 350 360 370 380 410 440 450 PART NO. 2544230123 2464220123 2544270101 2544280103 0031306000 0011406300 0186060020 2544250113 2704330200 2704330201 2274360103 2704350103 0043104250 2694550303 2274500203 0043106300 0022706000 0110060050 2544420123 0043104080 0022706000 PART NAME QTY. REMARKS GOVERNOR LEVER 1 GOVERNOR SHAFT 1 GOVERNOR ROD CP 1 ROD SPRING 1 CLIP 2 BOLT AND WASHER ASSY.
ROBIN EH25-2 ENGINE — COOLING AND STARTING ASSY. COOLING AND STARTING ASSY. PAGE 108 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — COOLING AND STARTING ASSY. COOLING AND STARTING ASSY. NO. 10 20 40 45 90 210 -1 * -2 * -3 * -4 * -5 * -6 * -11 * -35 * -49 * 220 PART NO. 2545345001 2709170303 0110060020 0732004950 2545270103 2705020100 2705011508 2705012008 2705011008 2615010008 2705012508 2275013108 2705014508 2705026108 2275015208 0110060010 PART NAME QTY. REMARKS BLOWER HOUSING CP 1 LABEL, TRADE MARK 1 FLANGE BOLT 5 LABEL, RECOIL OHV 1 HEAD COVER 1 RECOIL STARTER ASSY. .................... 1 ..............
ROBIN EH25-2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 110 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 10 20 30 40 50 -1 * -2 * -3 * -4 * -8 * -15 * 70 80% 90% 105 PART NO. 2546105011 0732003900 0430430015 0641360010 0642008600 0642004110 0642001430 0642001410 0642002360 0642002790 0642003230 2346260101 0851060000 0561110020 0011308200 PART NAME QTY. REMARKS FUEL TANK CP 1 LABEL, CAUTION 1 FUEL TANK CAP CP 1 FUEL FILTER CP 1 FUEL STRAINER ASSY. ...................... 1 ..............
ROBIN EH25-2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 112 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 210 -1 % * -2 % * -3 % * -4 % * -5 % * -6 % * -7 % * -8 * % -9 * % -11 * % -12 % * -13 % * -14 % * -15 % * -16 % * -17 % * -18 % * -19 % * -20 % * -22 * % -23 * -24 * % -32 * -40 % * -41 % * -61 * -62 * -89 % * -101 * -121 * PART NO.
ROBIN EH25-2 ENGINE — FLYWHEEL AND IGNITION ASSY. FLYWHEEL AND IGNITION ASSY. PAGE 114 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — FLYWHEEL AND IGNITION ASSY. FLYWHEEL AND IGNITION ASSY. NO. 10 11 30 60 70 90 100 110 PART NO. 2347020111 2547943021 0011406250 0660000361 0150040090 0566000190 0566120050 0650140031 0650141030 0655000051 PART NAME QTY. REMARKS FLYWHEEL CP 1 IGNITION COIL CP 1 BOLT AND WASHER ASSY. 2 SWITCH ASSY. 1 TAPPING SCREW 2 CLAMP 1 CLAMP .................................................. 1 ............. W/OIL SENSOR SPARK PLUG ........................................ 1 .............
ROBIN EH25-2 ENGINE — OIL SENSOR ASSY. OIL SENSOR ASSY. PAGE 116 — BA-SERIES WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV.
ROBIN EH25-2 ENGINE — OIL SENSOR ASSY. OIL SENSOR ASSY. NO. 700 760 790 PART NO. KS31102801 2147312201 2147900301 PART NAME QTY. REMARKS OIL SENSOR CP 19 ............................. 1 ............. W/OIL SENSOR WIRE 22 CP .......................................... 1 ............. W/OIL SENSOR CLAMP CP ............................................ 1 ............. W/OIL SENSOR BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTE PAGE BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
