User Manual

ISI5634PCI/4/8 User Guide

Windows 95/98/Me: Driver Installation Procedure

1. Ensure that your ISI5634PCI card has been installed according to the Hardware Installation

Procedures in Chapter 2.

2. Turn on the PC and start Windows 95/98/Me.

3. Windows will autodetect the ISI5634PCI card. When the Add New Hardware Wizard screen

appears, click Cancel.

4. Insert the ISI Family CD-ROM into the CD-ROM drive. (If driver was downloaded from MultiTech web

site and placed on a diskette, insert diskette into floppy drive now.)

5. (Follow either 5A or 5B, but not both.)

A. From Windows Explorer, open the 95-98-Me directory on the CD-ROM (for example,

E:\SERVCARD\DRIVERS\95-98-ME\SETUP.EXE) or floppy drive that contains the ISI driver file.

Highlight the file setup.exe.

B. From the Start menu, go to Run. Browse to the path of the 95-98-ME directory (for example,

E:\SERVCARD\DRIVERS\95-98-ME\) .

6. Launch the setup program. (From Windows Explorer, double-click on setup.exe; from the Run

menu, click OK.)

7. The installation wizard will begin running. At the Welcome screen, click Next.