Specifications

MTI BASICS® Tubs
GENERAL SPECIFICATIONS:
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
IMPORTANT ORDERING & INSTALLATION INFORMATION:
•
This tub model includes an access panel as a standard feature for drain, optional Virtual Spout,
and on select models, valve set installation.
•
Access panel is visibly located behind the waste and overflow. Please consider access panel
visibility before ordering and when planning final installation position.
•
Access panel dimensions vary according to tub model and design. Tubs featuring an integrated
faucet deck for valve installation will have a larger opening and panel size for easier installation.
•
Access panel can be eliminated by request at the time of ordering, which will increase installation diculty.
•
The Virtual Spout is installed below the water level of the tub. MTI supplies a Wilkins dual check valve and
an Acme in-wall atmospheric vent to prevent backsiphonage. However, some areas of the country require
additional backflow prevention when water is introduced to the bath below the water level. Please check local
codes.
•
Options listed cannot be combined with Designer Collection options.
CSA # MTIS-
1 of 2
©2021 by MTI Baths, Inc. Modification Rights Reserved
Effective 03 16 2021
• Before discarding tub crate, check for accessories that may be packaged inside.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
3"
23¼"
32¾"
59½"
22½"
19¼"
16"
49"
111°
6½"
65½"
35½"
26"
11¾"
4½"
at surface for
mounting faucets
Features a 4.5” wide flat deck surface on the drain side for mounting faucetry.
Installation: Freestanding
Material: Acrylic
Soaker Weight: 120 lbs / 54.43 kg
Maximum Fill: 73 gal to overflow
65.5" x 35.75" x 22.5"
MBRFSX6636
RFSX6636