Specification Sheet

Designer Collection Tubs
1 of 3
CSA # MTDS-
Rev. 04 22 2021
©2021 by MTI Baths, Inc. Modification Rights Reserved
• Options and accessories may be packaged inside the tub crate. Always check
packaging before discarding.
• All product measurements are +1/2”.
• Specifications and configurations are subject to change without notice.
• Measurements herein supersede all others published prior to publication date below.
Available as a freestanding model or finished on
1, 2 or 3 sides for various installation applications.
IMPORTANT ORDERING & INSTALLATION INFORMATION
• Before ordering or installing, please consider future access to equipment.
• Unless ordering Sculpted Finish on 4 sides, please include a diagram specifying which sides
will need to be finished, along with location of optional tile flange(s).
• Integrated overflow with direct connect toe tap drain in chrome included. See manual for
details.
• When ordering an air bath, the air blower must be remote mounted.
• Microbubbles system components must be installed on a non-Sculpted Finish side.
Components will extend beyond the perimeter of the tub. Call MTI for specific details
regarding the desired installation before placing the order.
• Radiance placed on floor locations will affect placement of air jets.
• Hydrotherapy equipment may ship loose for remote installation. See package content
on the following page for details. Specifications and configurations are subject to change
without notice.
ELECTRICAL COMPONENTS & SPECIFICATIONS
Hydrotherapy Package Components Included GFCI/110V
Microbubbles Microbubbles pump 1-15 amp
Air Massage heated blower 1-15 amp
Microbubbles with Air Microbubbles pump, heated
blower
1-20 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Microbubbles with
Air Elite
Microbubbles pump, heated
blower, chromatherapy
2-15 amp
Electrical requirements may change with the addition of optional therapy components.
For more information go to mtibaths.com.
CSA Certified C/US; ANSI Z124.1
CSA Certified C/US; ANSI 112.19.7
See the Installation & Operation Manual for more details.
MTI’s Customer Service: Monday-Friday 8am-6pm EST
800-783-8827 or [e-mail]
66"
23"
5¾"
3"
27"
36"
59¼"
46½"
22½"
18¾"
16"
3"
33"
10"
115°
95°
GENERAL SPECIFICATIONS
Material - Sculpted Finish Acrylic
Installation - Freestanding or Alcove
Soaker Weight - 170 lbs / 77 kg
Maximum Fill - 90 gal to overflow
NOTE: Filling this tub to the maximum may require an
above average size or dedicated water heater.
Kahlo 2
with Sculpted Finish®
 # 142A
66" x 36" x 22.5"
142A
Features a flat 5¾” deck surface on the drain side
for mounting faucetry and an integrated overflow.
Shown as Air Bath