Internet #207158546 Model #SINBWL-2321 Internet #300086855 Model #SBK-2321 USE AND CARE GUIDE UNDERMOUNT STAINLESS STEEL KITCHEN SINK Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER HOMEDEPOT.COM/GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this single bowl sink.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Planning Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . .
Pre-Installation PLANNING INSTALLATION *27" □□ Before installation verify that the cabinet width is at least *27". □□ Compare all parts with the Hardware Included and Package Contents lists in this manual. □□ Check the surface of the sink for any flaws or damage, including dents, bends, bumps, or scuff marks. If any damage is noticed or parts are missing, do not proceed with the installation. NOTE: This sink is an undermount (below the counter) installation.
Pre-Installation (continued) PACKAGE CONTENTS Use this line for FL US H MO UN T CU T. B A C D Part Description Quantity A Sink 1 B Template 1 C Strainer 1 D Grid Optional Accessories 1 NOTE: Model #SINBWL-2321 includes A, B, and C. Model #SBK-2321 kit includes A, B, C, and D. Model #GRID-2321 is for the separate purchase of D only. Model #SINKSTRAINER for purchase of C only.
Installation 1 2 Preparing the countertop □□ Place the template (B) on the countertop. Ensure the template (B) is centered on the counter so that it is parallel to the counter edge and that the installation hole will not interfere with the structure of the cabinet. □□ Drill a pilot hole to insert the blade of your jigsaw. □□ Cut the countertop opening. Use the appropriate cutting tool for the surface you are cutting and cut along the inside of the template line.
Installation (continued) 4 Installing the sink □□ Insert the screws (CC) attached to the clips (AA) loosely in the plastic caps (BB) in the holes that you drilled in the underside of the counter. BB □□ Place a small bead of silicone sealant (not included) around the upper lip of the sink (A). A □□ Carefully place the sink (A) into its location under the counter, with the lip of the sink being supported by the clips (AA). □□ Tighten the screws (CC) evenly, ensuring the sink (A) remains in place.
Care and Cleaning □□ Daily, regular cleaning to remove dirt and prevent staining is recommended. Use liquid dish detergent, water, and a soft household sponge. □□ Mild, non-abrasive cleaners can be used with a nylon scrub pad. To ensure a uniform appearance in a stainless steel sink surface, rinse with water and wipe down the sink with a soft, dry cloth. Drying the sink will prevent water spots caused by lime in the water.
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
