User's Manual

Chapter 3
3-24
PS2KB Wakeup Select
This feature allows you to specify the method of how the keyboard will
be awakened. Options: Hot Key, Password.
PS2KB Wakeup from S3
This feature allows you to set up the hot key combination for keyboard
to wake up from S3 state. Options: Disabled, Ctrl+F1/F2/F3/F4/F5/
F6/F7/F8,/F9/F10/F11/F12, Power, Wake, Any Key.
PS2MS Wakeup from S3, USB Resume from S3, VGA, LPT & COM,
HDD & FDD, PCI Master, PowerOn by PCI Card, Modem Ring Resume
These features specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Note: To use the function of Modem Ring Resume, you need to install
a modem supporting power-on function.
RTC Alarm Resume
This is to enable or disable the feature of booting up the system on a
scheduled time/date. Settings are Enabled and Disabled.
Date (of Month)
Specify the date for RTC Alram Resume. Settings are 0~31.
Resume Time (hh:mm:ss)
Specify the time for RTC Alarm Resume. Forat is <hour><minute>
<second>.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu and the following screen appears: