Please read this manual carefully before installation and keep it for future reference. Remote Manual Olympus Series Cassette Air Handlers The design and specifications are subject to change without prior notice. Consult with the sales agency or manufacturer for details. Olympus Series Cassette Air Handlers Please keep this manual where the operator can easily find it. Inside you will find helpful hints on how to use and maintain your unit properly. For more info visit www.mrcool.
® CONTENTS ® Handling the remote control Location of the remote control. Handling the remote control ............................................................. 2 Remote control specifications........................................................... 3 8m Function buttons ................................................................................ 4 Indicators on LCD .............................................................................. 7 AUTO COOL TEMP.
® Remote Control Specifications ® Function buttons Model RG05F2/BGEU1, RG05F3/BGEFU1 Rated Voltage 3.0V(Dry batteries R03/LR03 x2) 1 ON/OFF Button Operation starts when this button is pressed and stops when this button is pressed again. 2 MODE Button Each time the button is pressed, the operation mode is selected in a sequence of following: AUTO Signal Receiving Range 8m Environment 23 F~140 F(-5 C~60 C) COOL AUTO DRY O O O 1 Performance Feature 2 1.
® ® 11 Function buttons (continued) 6 AUTO COOL I FEEL /SELF CLEAN Function Press this button less than 2 seconds will initiate I FEEL function. And if this buttom tis held for more than 2 seconds, the SELF CLEAN function is initiated. AUTO When the I FEEL function is activated, the remote displays the actual temperature of its location. The remote control will send this signal to the air conditioner every 3 minutes interval until the I FEEL button is pressed again.
® ® Indicators on LCD How to use the buttons Mode display Displays the current operation mode. Including AUTO( ), COOL( ), DRY( ), HEAT( ) (Not applicable to cooling only models), FAN( ) and back to AUTO( AUTO ). Transmission Indicator This transmission indicator lights when the remote control transmits signals to the indoor unit. ON/OFF display Displayed by pressing the ON/OFF button. Press the ON/OFF button again to remove. Temp. display Displays the temperature setting(62OF~86OF/17OC~ 30OC).
® ® Auto operation Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing. 1. Press the MODE button to select Auto. 2. Press the UP/DOWN button to set the desired temperature. The temperature can be set within a range of 62 O F~86 O F in 1 O F increments. 3. Press the ON/OFFbutton to start the air conditioner. AUTO TEMP. COOL DRY F SET CLOCK HEAT HOUR FAN 1 MODE FAN SPEED 3 M 2 NOTE: 1.
® Timer operation Press the TIMER ON button to set the auto-on time of the unit. And press the TIMER OFF button to set the auto-off time of the unit. DRY HEAT TEMP. F SET CLOCK TIMER HOUR ON OFF FAN MODE FAN SPEED M SWING V SLEEP TIMER ON TURBO SWING H I FEEL SELF CLEAN RESET LOCK IMPORTANT The effective operation time set by the remote control for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.
® ® TIMER OFF TIMER HOUR OFF Example: To stop the air conditioner in 10 hours. 1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "HOUR" will show on the display area. 2. Press the TIMER OFF button to display "10" on the TIMER OFF display of the remote control. 3. Wait for 3 seconds and the TIMER OFF indicator stops flashing and this function is activated. The digital display area will show the temperature again.
