User Manual

7
5. Once the ready light becomes solid green, press the brew button “ ” and then rotate the
side knob counter-clockwise to the brew “ ” position. This will initiate the brewing
process and espresso will begin to flow in just seconds.
NOTE: If the brew and steam buttons begin to flash, after the side knob is
rotated the unit has informed you that the instructions were not
followed correctly. Switch the on/off button to the off “O” position to
reset. Return to step #4 to resume brewing expresso.
6. When the cup/carafe is filled to the desired level, turn the side knob clockwise to the off
“ ” position. Using less water will provide a stronger espresso taste.
CAUTION: Do not leave unit unattended while brewing since the brewing
process requires to be manually stopped. This will avoid overflow,
spillage and potential Hazards and damages. The unit requires to be
turned “off” manually.
7. Once you have prepared the desired amount of espresso, switch the power button to the
off position “O” and unplug the unit. Allow the unit to cool down before removing parts and
accessories prior to cleaning.
8. After the unit has cooled down, remove the brew basket from the brew head. Using the
filter retention clip to secure the filter in the filter holder, turn the brew basket upside down
remove the used espresso grounds. Rinse the filter and brew basket with water.
9. If you wish to brew additional espresso, repeat the process by following the steps in the
“HOW TO BREW ESPRESSO” section at the bottom of page 5.
CAUTION: THE METAL PARTS OF THE BREW BASKET MIGHT STILL BE VERY
HOT. MAKE SURE TO USE THE FILTER RETAINER CLIP WHEN
DISCARDING THE GROUNDS. COOL THESE PARTS BY RUNNING
UNDER COLD WATER.
10.For cleaning instructions, refer to Page 8.
HOW TO MAKE CAPPUCCINO
Cappuccino is espresso topped with steamed and frothed milk. Frothing milk for cappuccino
takes practice. Do not be discouraged if it is not perfect the first time. The milk should be half
steamed (bottom of pitcher) and half froth (top of pitcher). It may take a few times before you
perfect this process.
For best results, we recommend frothing the milk in a separate pitcher and pouring the
steamed milk into your coffee. The milk and pitcher should be cold. Do not use a pitcher,
which has just been washed in warm water. We also recommend a stainless steel frothing
pitcher and a beverage thermometer, if you own one, for preparing the best froth and steamed
milk.
PREPARATION: Gather the following prior to brewing
1. Fine espresso ground coffe
2. Tap water (or, preferably your favorite bottled water)
3. Milk (2% is recommended for best frothing results)
4. Frothing pitcher
5. Teaspoon
6. Your favorite cups/demitasses
7. A kitchen thermometer (optional) placed into the frothing pitcher will help enhance your
tasting experience by optimizing the stremed milk temperature to 150°-155° F.
BVMC-ECMP50_15ESM1.indd 7 10/12/14 9:56 AM