User Guide

M
Bluetooth
®
Accessory Pod
PMLN6396/HKLN4512
BLUETOOTH ACCESSORY POD PMLN6396/
HKLN4512
Congratulations on your new Motorola Solutions
Bluetooth Accessory Pod! This Pod device is
designed to allow you the convenience of Bluetooth
technology by simply connecting it to a Motorola
Solutions swivel earpiece, enabling you to
comfortably wear it in many convenient ways for long
periods of time. Furthermore, the Bluetooth Pod is
exclusively designed for business radio applications
and optimized to work with Motorola Solutions two-
way radios.
This user guide contains the operation and pairing
instructions of Bluetooth Pod. Before getting started,
please make sure you read and understand the RF
and Acoustic Safety sections, which contain very
important information about this product.
FOREWORD
RF Energy Exposure and Product Safety Guide
for Portable Two-Way Radios
ATTENTION!
The radio is restricted to occupational use only to
satisfy ICNIRP/FCC RF energy exposure
requirements. Before using this product, read the RF
Energy Exposure and Product Safety Guide that
ships with the radio which contains instructions for
safe usage and RF energy awareness and control for
compliance with applicable standards and regulation.
This device complies with part 15 of the FCC Rules
and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation. Any changes or
modifications not expressly approved by
Motorola Solutions may void the user’s authority
to operate this device.
Battery Information:
Battery is shipped with a nominal charge between
30% and 50%. Battery should be stored between
-10 °C (14 °F) and 30 °C (86 °F) to minimize
permanent capacity loss.
Caution: Storing your fully charged accessory in
high-temperature conditions may
permanently reduce the life of the internal
battery.
Note: The battery is not a user replaceable part.
Important Information:
• Do not charge your accessory in temperatures
below 0 °C (32 °F) or above 45 °C (113 °F). Do
not store your accessory in direct sunlight or
where expected temperatures can exceed this
range such as inside a parked car.
• Storing your fully charged accessory in
high-temperature conditions may permanently
reduce the life of the internal battery.
• Battery life may temporarily shorten in
low-temperature conditions.
ACOUSTIC SAFETY
Exposure to loud noises from any source for
extended periods of time may temporarily or
permanently affect your hearing. The louder the
radio's volume, the less time is required before your
hearing could be affected. Hearing damage from loud
noise is sometimes undetectable at first and can have
a cumulative effect.
To protect your hearing:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy
surroundings.
• Turn down the volume before adding headset or
earpiece.
• Limit the amount of time you use headsets or
earpieces at high volume.
• When using the radio without a headset or
earpiece, do not place the radio’s speaker
directly against your ear.
GETTING STARTED
Before you start, make sure the Pod is fully charged.
Recommended charging time is three (3) hours.
For detailed instructions on Pod charging, please
refer to the Charging Cradle Instructions Leaflet
(P/N: 68012008029).
BLUETOOTH ACCESSORY POD OVERVIEW
This Bluetooth Accessory Pod is designed to be used
in conjunction with the Motorola Solutions Swivel
Earpiece HKLN4513 (Figure 1-A) or the Motorola
Solutions Boom Microphone Earpiece HKLN4514
(Figure 1-B). The wearing positions for the Pod as
shown in the drawings are for illustration purposes
only and can be located at the user’s discretion. An
optional In-Ear- Adapter (Figure 2) can be used with
the Boom Microphone Earpiece for high noise
environments.
Swivel Earpiece HKLN4513
with Bluetooth Pod (Standard
Environments)
Boom Microphone Earpiece with
Bluetooth Pod HKLN4514
(For High Noise Environments)
Figure 1-A
Figure 1-B
Attach In-Ear Adapter to
Speaker Housing
(Optional Use:
P/N: AC000055A01)
Figure 2
Bluetooth Pod
Figure 1
In order to connect the Swivel Earpiece, insert the
earpiece audio connector into the Pod audio jack
connector, making sure it is firmly attached.
.
Figure 2
Note: Power ON the Pod only after the earpiece is
inserted.
PAIRING THE POD WITH YOUR TWO-WAY
RADIO
Pairing your Pod for the first time
1. Before starting, make sure your two-way radio is
in pairing mode.
2. With the Pod off, press and hold the Pod power
button until the LED is solid Blue.
3. Position the Pod next to the two-way radio that
you want to pair.
4. Pod will provide voice prompt to indicate
successful connection.
5. Refer to the table below for additional LED
status indications.
Clearing/Erasing Pairing Information
1. Ensure the previous connected two-way radio is
turned off.
2. Turn off the Pod.
3. Long press the power button until you hear a
voice prompt “Pairing Cleared”.
4. LED will show solid Blue, indicating the Pod is in
pairing mode.
BLUETOOTH POD STATUS LED
INDICATORS
CHARGING YOUR DEVICE
The Pod can be charged with Motorola Solutions
Bluetooth Pod Charging Cradle (PMLN6428/
HKLN4509).
Note: For assuring proper operation, DO NOT power
on the Pod while charging.
CHANGING YOUR POD VOLUME
To change Pod volume:
1. After the Pod is connected to the radio, select
the Pod volume range (high, medium and low).
2. Cycle through to the desired volume range with
sequential short presses (less than 1 second) of
the power button.
3. If the Pod is used with a CLP radio, the CLP
radio up/down volume controls a finer resolution
volume adjustment within each Pod volume
range. Consult CLP user manual for accessing
radio volume up/down control.
4. If the Pod is used with any other Motorola
Solutions radio, volume is adjusted only on the
Pod as described in Step 2.
WARRANTY
Motorola Solutions offers a standard one (1) year
warranty. Contact your Motorola Solutions dealer for
detailed information on the standard warranty.
Note: Warranty is void after customer replacement of
any parts other than replacement parts listed.
For more information about this product, please
contact your Motorola Authorized Dealer or visit us at:
www.motorolasolutions.com/bluetoothaccessories
Number Indication
1 3.5 mm Audio Jack
2 Bluetooth Status Indicator
3 Power / Volume Button
4 Clip
5 Recess for Label
6 Charger Contact
1
2
3
4
6
5
State LED Indication
Power
Power ON (LED ON)
(press and hold for 1
second)
Solid Green LED for 3
seconds then OFF
Power OFF (Press
and hold for 3
seconds)
Flashing Red LED 3
times then OFF
BT Status
Pairing Mode Solid Blue LED
BT Connecting Flashing Green LED
Pairing Fail/Timeout
Flashing Purple LED for
2 seconds
Wireless Link
Connected With Host
Flashing Blue LED every
5 seconds
Wireless Link
Disconnected From
Host
Fast Flashing Blue LED
Battery Low
Flashing Red LED every
2 minutes
Charging
Charging Solid Red LED
Fully Charged Solid Green LED
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M
logo are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC and are used under license. All other trademarks are the
property of their respective owners.
© 2012 and 2020 Motorola Solutions, Inc.
All rights reserved. Printed in
*68012007081*
68012007081-EC
en-US
EU Contact: Motorola Solutions, Czerwone Maki 82,
30-392 Krakow, Poland