MC3000 User Guide
MC3000 User Guide 72E-68899-05 Revision A October 2008
ii MC3000 User Guide © 2008 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
iii Revision History Changes to the original manual are listed below: Change Date Description -01 Rev A Dec. 2004 Initial Release -01 Rev B June 2005 Added Four Slot Ethernet cradle. Appendix A, added Accessory Specifications. -02 Rev A November 2005 Chapter 7, removed WZC, replaced with wireless application description. Global changes: Changed Windows CE.NET 4.2 to Windows CE.NET 5.0 Removed WZC references, replaced with wireless application references. Added 802.11a.
iv MC3000 User Guide
Table of Contents Patents.................................................................................................................................................. ii Revision History.................................................................................................................................... iii About This Guide Introduction ...........................................................................................................................................
vi MC3000 User Guide Bluetooth Radio ....................................................................................................................... On Device with Windows CE 5.0 (OEM Version 01.16 or higher) ................................................. WLAN Radio ............................................................................................................................ Bluetooth Radio ...........................................................................................
Table of Contents vii Operational Modes ................................................................................................................... Aiming the Mobile Computer .......................................................................................................... Imager Decode Ranges ................................................................................................................. Direct Part Marking .................................................................
viii MC3000 User Guide Device Info Tab .............................................................................................................................. Services Tab .................................................................................................................................. Dial-Up Networking Service ..................................................................................................... File Transfer Service .................................................
Table of Contents Battery Safety Guidelines .................................................................................................................... Troubleshooting ................................................................................................................................... Mobile Computer ............................................................................................................................ Single Slot Serial/USB Cradle ...............................
x MC3000 User Guide
About This Guide Introduction This guide provides information about using the MC3000 mobile computers and accessories. NOTE Screens and windows pictured in this guide are samples and may differ from actual screens. Documentation Set The documentation set for the MC3000 is divided into guides that provide information for specific user needs. • Microsoft Applications for Windows Mobile and CE 5.0 User Guide - describes how to use Microsoft developed applications.
xii MC3000 User Guide Configurations This guide covers the following configurations: Configuration Radios Display Memory Data Capture Operating System Keypads MC3000R None Color or monochrome 32 MB RAM/ 64 MB Flash or 64 MB RAM/ 64 MB Flash 1D laser scanner in rotating turret Windows CE 5.0 Core or Professional 28, 38 or 48 key MC3090G WLAN: 802.11a/b/g WPAN: Bluetooth Color or monochrome 32 MB RAM/ 64 MB Flash or 64 MB RAM/ 64 MB Flash 1D laser scanner or 2D imager Windows CE 5.
About This Guide The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 119581.1.1.1 indicates that the device is running AKU version 1.1.1. OEM Version on Windows Mobile 6.1 Devices To determine the OEM software version on a Windows Mobile 6.1 device: Tap Start > Settings > System tab > System Information icon > System tab. OEM Version on Windows CE 5.
xiv MC3000 User Guide BTExplorer Software To determine the BTExplorer software version on a Windows Mobile 6.1 or Windows CE 5.0 device: Tap BTExplorer icon > Show BTExplorer> File > About. Fusion Software To determine the Fusion software version on a Windows Mobile 6.1 or Windows CE 5.0 device: Tap Wireless Strength icon > Wireless Status > Versions.
About This Guide xv Chapter Descriptions Topics covered in this guide are as follows: • Chapter 1, Getting Started, describes the mobile computer’s physical characteristics, how to install and charge the batteries, remove and replace the Strap/Door assembly and how to start the mobile computer for the first time. • Chapter 2, Operating the MC3000, provides basic instructions for using the mobile computer and navigating the mobile computer software.
xvi MC3000 User Guide Related Documents and Software The following items provide more information about the MC3000 mobile computers.
Chapter 1 Getting Started Introduction This chapter describes the mobile computer physical characteristics, how to install and charge the batteries, how to remove and replace the Strap/Door Assembly and how to start the mobile computer for the first time. Unpacking the Mobile Computer Carefully remove all protective material from around the mobile computer and save the shipping container for later storage and shipping.
1-2 MC3000 User Guide Accessories Table 1-1 lists the MC3000 accessories. Table 1-1 MC3000 Accessories Accessory Description Single Slot Serial/USB Cradle Charges the mobile computer main battery and a spare battery, and synchronizes the mobile computer with a host computer through either a serial or USB connection. Four Slot Charge Only Cradle Charges up to four mobile computers. Four Slot Ethernet Cradle Charges up to four mobile computers and provides Ethernet communications.
Getting Started 1-3 Parts There are three versions of the MC3000 mobile computers, the MC3000 1D/2D Imager (MC3000S or MC3090S), the MC3000 Laser with Rotating Scan Turret (MC3000R or MC3090R) and the MC3090 Gun (MC3090G). For more information on the Rotating Scan Turret, see Figure 1-3 on page 1-4.
1-4 MC3000 User Guide Scan Window Headset Jack (optional) Scan Window Strap/Door Assembly Screws Headset Jack (optional) Stylus Strap/Door Assembly Stylus Holder Latches MC3000S MC3000R Figure 1-2 MC3000 Imager and MC3000 Laser Mobile Computers (Back View) Rotating Scan Turret The MC3000R mobile computer features a Rotating Scan Turret with three position stops. This feature offers greater scanning flexibility.
Getting Started Scan LED Indicators (red/green) Beeper Charge LED Indicator (amber) 1-5 Indicator LED Bar Display Scan Button Keypad Power Scan LED Indicator (red/green) Trigger Figure 1-4 MC3090G Mobile Computer Mobile Computer Startup To start using the mobile computer: • Install the main battery. • Charge the main battery and the backup battery. • Start the mobile computer. Install Main Battery If the main battery is charged, the mobile computer can be used immediately.
1-6 MC3000 User Guide CAUTION On the MC3090G battery, do not remove the battery pull tab. The pull tab is for enabling easy battery removal from the device. 3. Insert the battery into the slot, bottom first and press the battery gently into the slot. The battery clip locks the battery into place. 4. With the latches in the open position, replace the Strap/Door Assembly, top first and press to close. 5. Rotate the latches (to the lock position) to lock the Strap/Door Assembly in place.
Getting Started Latches 1-7 Hand Strap 1 2 3 0.5 in. (12.7 mm) Strap/Door Assembly Battery 5 Strap/Door Assembly Figure 1-6 Main Battery Installation (MC3090G) Battery Charging CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. Use the mobile computer cradles, cables and spare battery chargers to charge the mobile computer main battery.
1-8 MC3000 User Guide removed from the mobile computer or the main battery is fully discharged, the memory backup battery completely discharges in several hours. When the main battery reaches a very low battery state, the combination of main battery and backup battery retains data in memory for at least 72 hours. NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the backup battery is fully charged, data may be lost.
Getting Started 1-9 Spare Battery Charging There are three accessories that can be used to charge a spare battery: • Single Slot Serial/USB Cradle • Four Slot Spare Battery Charger • UBC Adapter. To charge a spare battery: 1. Connect the charging accessory to the appropriate power source. See Chapter 4, Accessories for setup instructions. 2. Insert the spare battery into the spare battery charging slot and gently press down on the battery to ensure proper contact.
1 - 10 MC3000 User Guide On Windows CE 5.0 configurations, after the calibration procedure is performed the factory settings launch the Demo window. Application specific shells may provide application specific windows instead of the Demo window. These screens also appear when a cold boot is performed. If the mobile computer does not power on, see Resetting the Mobile Computer on page 2-34. Calibration Screen Use the Calibration screen to align the touch screen: 1.
Getting Started 1 - 11 Waking the Mobile Computer The wakeup condition settings are used to define what actions wake up the mobile computer. The settings are configurable so they are subject to change/update. For more information see, Waking the Mobile Computer on page 2-35. Main Battery Removal Before removing the main battery, turn off the mobile computer. To remove the main battery: 1. Rotate the latches to the open position.
1 - 12 MC3000 User Guide Strap/Door Assembly Latches 1 2 3 0.5 in. (12.7 mm) Battery Pull Tab 4 4 Battery with Pull Tab Battery without Pull Tab Figure 1-11 Main Battery Removal (MC3090G) NOTE The SD card holder is located under the battery. To install the SD card, see Secure Device Card (Windows CE 5.0 Only) on page 4-12. Strap/Door Assembly Removal and Replacement (MC3000S/R) The Strap/Door Assembly consists of a hand strap and the battery door.
Getting Started 1 - 13 Latches Strap/Door Assembly #00 Phillips Screwdriver Strap Loop Hand Strap Mounting Clip Screws Mounting Clip Figure 1-12 Strap/Door Removal and Replacement (MC3000S/R) Strap/Door Assembly Removal and Replacement (MC3090G) The Strap/Door Assembly consists of a hand strap and the battery door. Before removing the Strap/Door Assembly, press the red Power button to turn off the screen and set the mobile computer to suspend mode. To remove the Strap/Door Assembly: 1.
1 - 14 MC3000 User Guide Loop Button Strap/Door Assembly Latches 0.5 in. (12.7 mm) Figure 1-13 Strap/Door Removal and Replacement (MC3090G) Turning Off the Radios On Device with Windows CE 5.0 (OEM Version 01.15 or lower) NOTE To determine the operating system OEM version, see Configurations on page xii. WLAN Radio To turn off the WLAN radio: 1. Tap Start > Settings > Control Panel > Power icon > PwrDevices tab. 2. In the text box, scroll down until WLP1: displays. 3. Select WLP1:.
Getting Started 1 - 15 3. Select WLP1:. WLP1: displays in the text box at the top of the window. 4. In the drop-down list box, select D0. 5. Tap Set. Bluetooth Radio To turn off the Bluetooth radio, tap Bluetooth icon in the task tray and select Disable Bluetooth. Bluetooth Icon Figure 1-14 Bluetooth Icon To turn on the Bluetooth radio, tap Bluetooth icon in the task tray and select Enable Bluetooth. On Device with Windows CE 5.0 (OEM Version 01.
1 - 16 MC3000 User Guide Figure 1-17 Opening Wireless Manager Select Wireless Manager. Figure 1-18 Wireless Manager Window To enable or disable a wireless connection, tap its blue bar. To enable or disable all wireless connections, tap and hold the All bar. To configure settings for a connection, tap Menu.
Chapter 2 Operating the MC3000 Introduction This chapter provides basic instructions for using the mobile computer and navigating the mobile computer software. Power Button Press the red Power button to toggle the mobile computer between suspend and resume. When the screen is off the mobile computer is in suspend mode and when the screen is on the mobile computer is on.
2-2 MC3000 User Guide Keypad Special Functions The keypad special functions are color coded on the keypads. For example, on the 38-key keypad, the display contrast icon is blue indicating that the blue function key must be selected first along with the F6 key, to increase the display contrast. Table 2-1 Keypad Special Functions Icon 28-Key Keystrokes 38-Key Keystrokes 48-Key Keystrokes Special Function Blue function key and period.
Operating the MC3000 2-3 20-Key Mechanical Keypad The 20-key mechanical keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note, that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table 2-4 on page 2-8 for key and button descriptions.
2-4 MC3000 User Guide Table 2-2 20-Key Mechanical Keypad Descriptions (Continued) Key Description Numeric keys Produces 0 - 9 numeric characters. period Produces a (.) period. C Produces a backspace. ESC Exits the current operation. ENTER Executes a selected item or function. Produces a TAB character when pressed after the Fn key.
Operating the MC3000 2-5 28-Key Keypad The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table 2-3 on page 2-5 for key and button descriptions and Table 2-1 on page 2-2 for the keypad special functions.
2-6 MC3000 User Guide Table 2-3 28-Key Descriptions (Continued) Key Description Scroll Left and Right Moves left and right from one item to another. Increases/decreases specified values. Produces a TAB when the blue FUNC key is activated and the right arrow key is pressed. ESC Produces the ESC function by default. CTRL Press and release the CTRL key to activate the keypad alternate CTRL functions.
Operating the MC3000 2-7 Table 2-3 28-Key Descriptions (Continued) Key ALPHA (orange) Description Press the orange ALPHA key to access the alternate ALPHA characters (shown on the keypad in orange). The icon appears on the taskbar on WinCE devices and the icon appears at the bottom of the screen on Windows Mobile 6.1 devices. Press and release the orange ALPHA key again to return to the default keypad functions.
2-8 MC3000 User Guide 38-Key Keypad The 38-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table 2-4 on page 2-8 for key and button descriptions and Table 2-1 on page 2-2 for the keypad special functions.
Operating the MC3000 2-9 Table 2-4 38-Key Descriptions (Continued) Key Description Scan (yellow) Used in scanning applications, press to scan a bar code. Scroll Left and Right Moves left and right from one item to another by default. Produces a TAB when the blue FUNC key is activated and the right arrow key is pressed. Scroll Up and Down Moves up and down from one item to another by default.
2 - 10 MC3000 User Guide Table 2-4 38-Key Descriptions (Continued) Key Description Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries. Produces alpha values when the orange ALPHA key is activated. Comma Produces a comma by default. Produces alpha values when the orange ALPHA key is activated. Special Function/Alpha Special function by default or when the blue FUNC key is activated. Produces alpha values when the orange ALPHA key is activated. ...
Operating the MC3000 2 - 11 48-Key Keypad The 48-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note, that keypad functions can be changed by an application so the mobile computer keypad may not function as described. See Table 2-4 on page 2-8 for key and button descriptions and Table 2-1 on page 2-2 for the keypad special functions.
2 - 12 MC3000 User Guide Table 2-5 48-Key Descriptions (Continued) Key Description Numeric/Scroll/Select Numeric, scroll, select keys. Numeric by default. With the orange key activated, the 2, 4, 6, and 8 keys produce scroll functions and the 5 key produces a select function. With the FUNC key activated, 7 produces the ESC function and 9 produces the TAB function. ... Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions.
Operating the MC3000 2 - 13 Windows CE Demo Window On initial power up (or on a warm or cold boot) the Demo window appears. This window links to the Test Applications window and the two windows provide the sample/demo applications. The sample/demo applications are intended to be used by application developers as application development examples. These applications were not developed to support end users.
2 - 14 MC3000 User Guide Windows CE Status Icons The taskbar (at the bottom of the screen) displays the Start button, active programs, battery status and communication status. The taskbar icons are described in Table 2-6. The taskbar icons display the function status, indicate what programs are active and indicate the battery charge status. The Taskbar buttons are used to access menus, select/deselect functions or to change display windows.
Operating the MC3000 2 - 15 Table 2-6 Taskbar Icons (Continued) Icon Description Indicates that the wireless application radio is not connected to a wireless LAN network. The Bluetooth Enabled icon appears in the task tray and indicates that the Bluetooth radio is on. The Bluetooth Disabled icon appears in the task tray and indicates that the Bluetooth radio is off.
2 - 16 MC3000 User Guide • Help: Accesses the Windows CE Help. Not available on mobile computers running Windows CE .NET 5.0 Core. • Run . . . : Runs a program or application. • Suspend: Places the mobile computer in the suspend state. Figure 2-8 Start Menu Programs Menu From the Start menu, tap Programs to launch the Programs menu. The programs provided with Windows CE .NET 5.0 Professional and Windows CE .NET 5.0 Core are displayed in the Programs menu.
Operating the MC3000 2 - 17 Windows CE .NET 5.0 Core desktop functions include: • My Computer: Double-tap the icon to open My Computer. • Recycle Bin: Deleted files remain in the recycle bin until the recycle bin is emptied. Once emptied the files cannot be retrieved. Windows CE .NET 5.0 Professional desktop functions include: • My Computer: Double-tap the icon to open My Computer. • Recycle Bin: Deleted files remain in the recycle bin until the recycle bin is emptied.
2 - 18 MC3000 User Guide Properties 1. Tap Start > Control Panel > Taskbar and Start Menu ... . The Task Manager, Properties window displays, see Figure 2-10 on page 2-17. 2. Tap Properties to display the Taskbar and Start Menu, General tab. 3. This menu provides taskbar options: • Check the Always on Top checkbox to keep the taskbar on top of all other windows. • Check the AutoHide checkbox to make the taskbar disappear, touch the bottom of the display to make the taskbar return.
Operating the MC3000 2 - 19 Windows Mobile 6.1 Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. Tap a section on the screen to open the associated program. Alternatively, tap Start > Today to display the Today screen.
2 - 20 MC3000 User Guide Table 2-7 Status Icons (Continued) Icon Function Battery Description Backup battery is very low. Main battery is charging.* Main battery level.* Main battery is very low.* Connectivity Connection is active. ActiveSync error Synchronization is occurring. Instant Message Notification that one or more instant messages were received. E-Mail Notification that one or more e-mail messages were received.
Operating the MC3000 2 - 21 Table 2-8 Command Bar Icons (Continued) Icon Description The Bluetooth Disabled icon appears in the task tray and indicates that the Bluetooth radio is off. The Bluetooth Communication icon appears in the task tray and indicates that the mobile computer is communicating with another Bluetooth device. The ActiveSync icon appears in the task tray and indicates an active serial connection between the mobile computer and the development computer.
2 - 22 MC3000 User Guide Figure 2-17 Battery Icon on the Title Bar You can also view the battery status using the Power window. When the main battery power falls below a predetermined level a Main Battery dialog box appears indicating the status of the main battery. When the backup battery power falls below a predetermined level a Backup Battery icon and dialog box appears indicating the status of the backup battery.
Operating the MC3000 2 - 23 Digital Clock Analog Clock Figure 2-20 Time Icon Format Menu To display current date, time and appointments: 1. Tap the Time icon to display the Time and Next Appointment dialog box. Battery Status Icon Upcoming Appointments Current Date and Time Figure 2-21 Time and Next Appointment Dialog Box 2. The dialog box displays the current date and time, the battery status and any upcoming appointments in the Calendar.
2 - 24 MC3000 User Guide Figure 2-23 Multiple Notifications Icon Locking the Mobile Computer (Windows Mobile 6.1 Only) Use the Device Lock feature to prevent use of the device. Note that when locked, the mobile computer does not respond to screen or keypad input. To lock the device, tap the Device unlocked icon. The icon changes to locked. Figure 2-24 Device Locked/Unlocked Icons To unlock the device and free it for use, tap Unlock.
Operating the MC3000 2 - 25 Entering Information To enter information: • Use the keypad. • Use the keyboard input panel (soft keyboard) to enter text. • Scan bar code data into data fields. • Use Microsoft® ActiveSync® to synchronize or copy information from the host computer to the mobile computer. For more information on ActiveSync, refer to the MC3000 Integrator Guide.
2 - 26 MC3000 User Guide Using a Bluetooth Headset You can use a Bluetooth headset for audio communication when an audio enabled application is used. See Chapter 3, Using Bluetooth for information on connecting a Bluetooth device to the mobile computer. Ensure that the mobile computer’s volume is set appropriately before putting the headset on. When a Bluetooth headset is connected the speaker is muted.
Operating the MC3000 2 - 27 Scan LED Indicators The red/green Scan LED Indicators (located in the Indicator LED Bar and in the rotating turret) indicates the scan status. For the location of the Scan LED Indicators see, Figure 1-1 on page 1-3. Table 2-9 Scan LED Indicators LED Status Indication Off Not scanning. Solid Red Laser enabled, scanning in process. Solid Green Successful decode. Scanning Considerations Scanning consists of; aim, scan and decode.
2 - 28 MC3000 User Guide Note: Typical performance at 73˚ F (23˚ C) on high quality symbols. MC3000 2.0 5 mil cm 12 30.48 9 22.86 6 15.25 3 7.62 0 0 3 7.62 6 15.25 9 22.86 12 30.48 4.9 7.5 mil 1.6 in. 7.9 10 mil W i d t h o f F i e l d 10.8 1.2 UPC A 12.7 1.3 20 mil 1.4 17.9 40 mil 2.4 55 mil 3.4 in. 0 cm 0 26.4 30.6 5 12.7 15 38.1 10 25.4 20 50.8 30 76.2 25 63.5 35 88.
Operating the MC3000 2 - 29 Table 2-10 MC3000 Laser Decode Ranges (Continued) Ranges Bar Code Density Near Far 20 mil 1.4 in 3.56 cm 17.9 in 45.47 cm 40 mil 2.4 in 6.10 cm 26.4 in 67.06 cm 55 mil 3.4 in 8.64 cm 30.6 in 77.72 cm Imaging The imager version of the mobile computer has the following features: • Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal, PDF417 and 2-D matrix code types.
2 - 30 MC3000 User Guide Pick List Mode Pick List mode allows the user to selectively decode a bar code when more than one bar code is in the mobile computer’s field of view. By moving the aiming crosshair over the wanted bar code the user can selectively read only the required bar code. This feature is particularly valued for pick lists containing multiple bar codes and manufacturing or transport labels containing more than one bar code type (either 1D or 2D).
Operating the MC3000 2 - 31 Figure 2-32 Pick List Mode with Multiple Bar Codes in Aiming Pattern 2. The aiming pattern is smaller when the Imager is closer to the symbol and larger when it is farther from the symbol. Scan symbols with smaller bars or elements (mil size) closer to the unit and those with larger bars or elements (mil size) farther from the unit. 3.
2 - 32 MC3000 User Guide Note: Typical performance at 73˚ F (23˚ C) on high quality symbols. MC3000 in. cm 6 15.24 5 12.7 4 10.16 3 7.62 2 5.08 1 2.54 0 4.5 5 mil 0 1 2.54 2 5.08 3 7.62 4 10.16 5 12.7 6 15.24 6.5 PDF417 6.67 mil 5.3 7.7 7.5 mil 10.7 3.3 PDF417 10 mil 11.1 4.3 UPC A 2.5 14.2 PDF417 15 mil 3.8 20 mil 2.8 in. 0 cm 0 14.4 18.9 10 25.4 5 12.7 15 38.1 20 50.
Operating the MC3000 2 - 33 Table 2-11 MC3000 Imager Decode Ranges (Continued) Ranges Bar Code Density Near Far PDF417 6.67 mil 5.3 in 13.46 cm 7.7 in 19.56 cm PDF417 10 mil 4.3 in 10.92 cm 11.1 in 28.19 cm PDF417 15 mil 3.8 in 9.65 cm 14.4 in 36.58 cm Direct Part Marking Direct Part Marking (DPM) is where an item is physically altered by methods such as dot peening, laser and electro-chemical etching to produce two different surface conditions.
2 - 34 MC3000 User Guide 4. Press the scan button. The Scan LED Indicators illuminate red to indicate that the laser is on. The Scan LED Indicators illuminate green and a beep sounds to indicate a successful decode. Resetting the Mobile Computer Windows CE Devices If the mobile computer stops responding to input, reset it. There are two reset functions, warm boot and cold boot. A warm boot restarts the mobile computer by closing all running programs. All data that is not saved is lost.
Operating the MC3000 2 - 35 2. Calibrate the touch screen. See Calibration Screen on page 1-10 to calibrate the mobile computer screen. Windows Mobile 6.1 Devices There are two reset functions, warm boot and cold boot. • A warm boot restarts the mobile computer and closes all running programs. • A cold boot also restarts the mobile computer and closes all running programs but also resets the Real-Time-Clock (RTC). Data saved in flash memory or a memory card is not lost. Perform a warm boot first.
2 - 36 MC3000 User Guide Table 2-12 Wakeup Default Settings (Continued) Condition for Wakeup Power Button Automatic Time-out The scan triggered is pressed. No Yes The screen is touched. No No Wireless LAN activity is detected. No No File System Directory Structure The mobile computer directory structure displays all of the file folders. The pre-installed folders are in flash file system memory and optional removable storage devices (SD storage cards).
Operating the MC3000 2 - 37 that the wireless application radio is connected to a wireless LAN network. If the WLAN radio is not connected or if the signal strength is not “Good” or better, contact the network administrator. Table 2-13 Wireless Applications Icons, Signal Strength Descriptions Icon Status Action Excellent signal strength Wireless LAN network is ready to use. Very good signal strength Wireless LAN network is ready to use. Good signal strength Wireless LAN network is ready to use.
2 - 38 MC3000 User Guide
Chapter 3 Using Bluetooth Introduction Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) RF to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (30 feet/10 meters) communications and low power consumption. Mobile computers with Bluetooth capabilities can exchange information (e.g.
3-2 MC3000 User Guide class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space. NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required. Security The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need.
Using Bluetooth Figure 3-1 3-3 Disable Bluetooth Enabling Bluetooth To enable Bluetooth, tap Bluetooth icon > Enable Bluetooth. The Bluetooth icon changes to indicate that Bluetooth is enabled. Figure 3-2 Enable Bluetooth Bluetooth Power States Cold Boot When a cold boot is performed on the mobile computer, Bluetooth turns off. It is normal to see the Bluetooth icon appear and disappear, as well as a wait cursor, when initialization proceeds in all modes.
3-4 MC3000 User Guide Suspend When the mobile computer suspends, Bluetooth turns off. NOTE When the mobile computer is placed in suspend mode, the Bluetooth radio mode powers off and the piconet (Bluetooth connection) is dropped. When the mobile computer resumes, it could take up to 10 seconds for the Bluetooth radio driver to re-initialize the radio. Resume When the mobile computer resumes, Bluetooth turns on if it was on prior to suspend.
Using Bluetooth 3-5 Modes The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users. Wizard Mode Wizard Mode provides a simple step by step process for discovering and connecting to Bluetooth devices. The wizard takes you through the entire process. NOTE When switching between Wizard Mode and Explorer Mode, all active connections are closed.
3-6 MC3000 User Guide Figure 3-5 NOTE Select Remote Device Window Devices discovered previously are listed to save time. To start a new device discovery, tap and hold and select Discover Devices from the menu. 5. Select a device from the list and then tap Next. The Connection Favorite Options window appears. Figure 3-6 Connection Favorite Options Window 6. Select Save As Favorite check box to save this service in the Favorite view. 7.
Using Bluetooth Figure 3-7 3-7 Connection Summary Window 9. Tap Connect to connect to the service. The following actions are available in the drop-down list (actions may vary depending upon configurations): • Explore Services on Remote Device • Pair with a Remote Device • ActiveSync via Bluetooth • Browse Files on Remote Device • Connect to Internet Using Access Point • Connect to Internet Using Phone/Modem • Connect to a Personal Area Network • Send or Exchange Objects • Associate Serial Port.
3-8 MC3000 User Guide You can also use the “tap and hold” technique to view available options. Scroll bars and view options are like those you’re familiar with on your Windows desktop.
Using Bluetooth Figure 3-10 3-9 Discover Devices 5. The discovered devices display in the Untrusted Devices folder. Figure 3-11 Discovered Devices Listed in Untrusted Folder Bonding with Discovered Device(s) A bond is a relationship created between the mobile computer and another Bluetooth device in order to exchange information in a secure manner. Creating a bond involves entering the same PIN on the two devices to bond.
3 - 10 MC3000 User Guide Figure 3-12 Pair a Remote Device 3. Select Pair from the pop-up menu. 4. On the mobile computer, the PIN Code Request window appears. Figure 3-13 PIN Code Request Window 5. In the PIN Code: text box, enter the PIN number (between 1 and 16 characters) and then tap OK. 6. On the remote device, enter the same PIN number. 7. The devices are successfully paired. The device name moves to the Trusted Devices folder.
Using Bluetooth 3 - 11 Renaming a Bonded Device If it is necessary to rename a bonded device, it can be done from the BTExplorer window. 1. Launch BTExplorer. 2. Tap and hold the device to rename and select Rename in the pop-up menu. Figure 3-15 Rename Device Selection Dialog Box 3. The Change Device Name window appears. Figure 3-16 Change Device Name Window 4. Enter a new name for the bonded device in the text box. Tap OK.
3 - 12 MC3000 User Guide Figure 3-17 Delete a Bonded Device 3. A confirmation dialog appears. Tap Yes. Accepting a Bond When a remote device wants to bond with a mobile computer you give permission by entering a PIN when requested. 1. Ensure that the mobile computer is set to discoverable and connectable. See Bluetooth Settings on page 3-21. 2. When prompted to bond with the remote device the PIN Code Request window appears.
Using Bluetooth 3 - 13 Discovering Services Before services can be used, you must first discover remote devices and then bond to those devices. To determine what services are available on a bonded remote device: 1. Tap the Bluetooth icon and select Show BTExplorer. 2. In BTExplorer window, tap and hold on the remote device and select Explore from the pop-up menu. Figure 3-19 Discovering Services 3. The mobile computer communicates with the remote device and then lists the services under the device name.
3 - 14 MC3000 User Guide File Transfer Services NOTE Shared folders are a security risk. To transfer files between the mobile computer and another Bluetooth enabled device: 1. Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-21. 2. Discover and bond (pair) with the remote access point.See Bonding with Discovered Device(s) on page 3-9. 3. In BTExplorer, select the Remote Devices folder. 4. Select the Trusted Devices folder. 5. Tap the remote device folder. 6.
Using Bluetooth 3 - 15 Delete File To delete a file from the remote device: 1. Tap and hold on the file and select Delete. 2. In the Delete Remote Device File dialog box tap OK. Get File To copy a file from a remote device: 1. Tap and hold on the file and select Get. The Save Remote File window appears. 2. Navigate to the directory to save the file. 3. Tap Save. The file is transferred from the remote device to the mobile computer. Put File To copy a file to a remote device: 1.
3 - 16 MC3000 User Guide Prior to creating a connection, ensure the following: • Bluetooth phone is turned on. • Bluetooth phone is discoverable. (Some phones may also need to be pairable in order to accept a bonding request. For more information, refer to the phone documentation.) • Mobile computer’s and phone's Bluetooth radios are turned on. • Mobile computer and phone are within range of each other (30 feet/10 meters). Complete the following steps to create a new Bluetooth connection.
Using Bluetooth 3 - 17 Figure 3-23 Network Log On Window 10. In the User name: text box, enter the user name for this connection. 11. In the Password: text box, enter the password for this connection. 12. In the Domain: text box, enter the domain for this connection, if required. 13. Tap OK. 14. The phone begins dialing. 15. The phone connects to the network. 16. To end a session, tap the Connection icon and then tap Disconnect in the dialog box. Add a Dial-up Entry To add a dial-up entry: 1.
3 - 18 MC3000 User Guide 3. In the Name for the connection text box, enter a name for this connection. 4. In the Country Code text box, enter the country code for the country that you are calling. 5. In the Area Code text box, enter the area code. 6. In the Phone Number text box, enter the phone number. 7. Tap OK. OBEX Object Push Services Object Exchange (OBEX) is a set of protocols allowing objects such as pictures to be shared using Bluetooth.
Using Bluetooth 3 - 19 Figure 3-25 OBEX Object Push Window 7. In the Action drop-down list, select Send A Picture. 8. Tap Figure 3-26 . The Send Local Picture window appears. Send Local Picture Window 9. Navigate to the picture that you want to send to the other device. 10. Tap Open. 11. Tap OK. The picture is sent to the other device and a confirmation dialog box appears on the other device to accept the picture. A Send Picture dialog appears. 12. Tap Ok.
3 - 20 MC3000 User Guide 5. Tap the remote device folder. 6. Tap and hold on the remote device and select Explore. A headset service item appears. 7. Tap and hold on the headset service name and select Connect. 8. The mobile computer connects to the headset. Refer to your headset user manual for instruction on communicating with a Bluetooth device. To adjust the microphone gain: 1. Tap and hold on the headset service item and select Adjust Microphone from the pop-up menu.
Using Bluetooth 3 - 21 Personal Area Network Services Connect two or more Bluetooth devices to share files, collaborate or play multi player games. To establish a Personal Area Network connection: 1. Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-21. 2. Discover and bond (pair) with the remote device.See Bonding with Discovered Device(s) on page 3-9. 3. In BTExplorer, select the Remote Devices folder. 4. Select the Trusted Devices folder. 5.
3 - 22 MC3000 User Guide Services Tab For security reason, by default services are not enabled. Use the Services tab to add or delete Bluetooth services. Figure 3-29 BTExplorer Settings - Services Tab To add a service: 1. Tap Add. The Add Local Service window displays. Figure 3-30 Add Local Service Window 2. In the list, select a service to add. 3. Tap OK. The Edit Local Service window displays for the selected service. 4. Select the appropriate information and then tap OK.
Using Bluetooth 3 - 23 Figure 3-31 Add Local Service Window Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Local COM Port Select the COM port. Select COM1 to use a modem or other device that is connected to the connector on the bottom of the mobile computer. Local Baud Rate Select the communication baud rate. Local Port Options Select the port option.
3 - 24 MC3000 User Guide OBEX Object Push Service OBEX Object Push allows contacts, business cards, pictures, appointments, and tasks to be pushed to the device by other Bluetooth devices. Figure 3-33 OBEX Exchange Information Window Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Do not allow clients to push objects Disables clients from pushing objects to the mobile computer.
Using Bluetooth 3 - 25 Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Support Group Ad-Hoc Networking Select to enable Ad-Hoc networking. Serial Port Service Serial port allows COM ports to be accessed by other Bluetooth devices. Figure 3-35 Serial Port Service Window Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt.
3 - 26 MC3000 User Guide Figure 3-36 Headset Service Window Service Name Displays the name of the service. Security Tab To adjust the security settings for an individual service, select the Services tab first, then select the individual service, then Properties. Figure 3-37 BTExplorer Settings - Security Tab Use PIN Code (Incoming Connecting) Select for automatic use of the PIN code entered in the PIN Code text box. It is recommended not to use this automatic PIN code feature.
Using Bluetooth 3 - 27 Figure 3-38 BTExplorer Settings - Discovery Tab Inquiry Length Sets the amount of time that the mobile computer takes to discover Bluetooth devices in the area. Name Discovery Mode Select either Automatic or manual. Discovered Devices Deletes all discovered devices and link keys. Virtual COM Port Tab Use the Virtual COM Port tab to select the COM ports for Bluetooth communication.
3 - 28 MC3000 User Guide Figure 3-40 COM Port Connection Miscellaneous Tab Figure 3-41 BTExplorer Settings - Miscellaneous Tab Highlight Connections Select the connection type to highlight when connected. In the Wizard Mode, the only option is Favorites or None. In the Explorer Mode the options are None, Tree View Only, List View Only or Tree and List View. Apply Text Style Select the text style to be applied to the connection text.
Chapter 4 Accessories Introduction The MC3000 accessories provide a variety of product support capabilities. Accessories include cradles, cables, spare battery chargers and SD cards. Cradles • The Single Slot Serial/USB cradle charges the mobile computer main battery and/or a spare battery. It also synchronizes the mobile computer with a host computer through either a serial or a USB connection. • The Four Slot Charge Only cradle charges up to four mobile computers.
4-2 MC3000 User Guide SD Card The SD card provides additional storage capacity for the mobile computer. Plastic Holster The Plastic Holster provides a clip on holder for the mobile computer. Fabric Holster The Fabric Holster provides a clip on holder for the mobile computer. Single Slot Serial/USB Cradle CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. The Single Slot Serial/USB cradle: • Provides 5.
Accessories USB Port Serial Port Indicator LED Bar Charge LED Indicator (amber) 4-3 Spare Battery Spare Battery Charging Slot Battery Clip Power Port Mobile Computer Slot Spare Battery Charging LED Figure 4-1 Single Slot Serial/USB Cradle 2. When charging is complete, remove the mobile computer from the mobile computer slot. To charge the spare battery: 1. Insert the spare battery into the spare battery charging slot, bottom first, and pivot the top of the battery down onto the contact pins. 2.
4-4 MC3000 User Guide Table 4-1 LED Charging Status Indicators LED Indication Mobile Computer Charging (LED on mobile computer) Off Mobile computer not placed correctly in the cradle; cable not connected correctly; charger is not powered. Fast Blinking Amber Error in charging; check placement of mobile computer. Slow Blinking Amber Mobile computer is charging. Solid Amber Charging complete.
Accessories 4-5 Four Slot Cradles CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. There are two four slot cradles, Four Slot Charge Only cradle and Four Slot Ethernet cradle. The Four Slot Ethernet cradle provides Ethernet communications. Both four slot cradles: • Provide 5.4 VDC power for operating the mobile computer and charging the battery. • Simultaneously charges up to four mobile computers.
4-6 MC3000 User Guide LED Charge Indications The Four Slot cradles use the mobile computer amber Charge LED Indicator to indicate the battery charging status. See Table 4-1 on page 4-4 for charging status indications. Power LED The green Power LED (only on the Four Slot Charge Only cradle) lights to indicate that the Four Slot Charge Only cradle is connected to a power source. Speed LED The green Speed LED (only on the Four Slot Ethernet cradle) lights to indicate that the transfer rate is 100 Mbps.
Accessories 4-7 Four Slot Spare Battery Charger CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. The Four Slot Spare Battery Charger simultaneously charges up to four spare batteries. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative power supply will void the product warranty and may cause product damage.
4-8 MC3000 User Guide LED Charge Indications The Spare Battery Charging LEDs indicate the spare battery charging status. The Spare Battery Charging LEDs are arranged in the same pattern as the spare battery charging slots so that the charging status of each battery can be identified. See Table 4-1 on page 4-4 for charging status indications. Cables The cables are available with a variety of connection capabilities. CAUTION Use only a Symbol approved power supply output rated 5.4 VDC and minimum 3 A.
Accessories 4-9 Snaps Figure 4-4 Cables Battery Charging and Operating Power CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. The MC3000 Communication/Charge cables can charge the mobile computer battery and supply operating power. To charge the mobile computer battery: 1. Connect the MC3000 Communication/Charge cable power input connector to the Symbol approved power source. 2.
4 - 10 MC3000 User Guide Universal Battery Charger (UBC) Adapter CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, refer to the UBC 2000 Quick Reference Guide p/n 70-33188-xx.
Accessories 4 - 11 POWER READY or STANDBY or FAULT (Green) (Flashing Yellow) (Solid Yellow) CHARGING (Solid Yellow) Figure 4-6 Table 4-2 UBC Adapter LEDs UBC Adapter Charge LED Status Indications LED Indication Description POWER Green Power is connected to the UBC Adapter. READY or Green Charging complete. STANDBY or Flashing-Yellow The battery was deeply discharged and is being trickle charged to bring the voltage up to the operating level.
4 - 12 MC3000 User Guide Secure Device Card (Windows CE 5.0 Only) The Secure Device (SD) card provides secondary non-volatile storage (the flash memory is slower than RAM). The SD card holder is located under the battery. CAUTION Follow proper Electro-Static Discharge (ESD) precautions to avoid damaging the SD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. Do not use the SD card slot for any other accessories.
Accessories 4 - 13 Plastic Holster The Plastic Holster provides a holder for the mobile computer. It consists of a mobile computer holder and a detachable belt clip. Press the release button to remove the detachable belt clip. Release Button Detachable Belt Clip Mobile Computer Holder Figure 4-8 Plastic Holster Pinch the clip release and attach the Plastic Holster to a belt or waist band.
4 - 14 MC3000 User Guide Insert Mobile Computer Figure 4-10 Remove Mobile Computer Insert and Remove the Mobile Computer
Accessories 4 - 15 Fabric Holster The Fabric Holster provides a soft holder for the mobile computer. It consists of a fabric mobile computer holder, a detachable shoulder strap and a detachable belt clip. Press the release button to remove the detachable belt clip. See Figure 4-11 to remove the detachable clip see Figure 4-12 on page 4-15 to attach the Fabric Holster to a belt and see Figure 4-13 on page 4-16 to attach the Fabric Holster to a shoulder strap.
4 - 16 MC3000 User Guide Shoulder Strap Remove the detachable belt clip (see Figure 4-11 on page 4-15) and attach the shoulder strap. Shoulder Strap Clip Release Figure 4-13 Attach the Fabric Holster To the Shoulder Strap The Fabric Holster holds the mobile computer on a belt or waist band. 1. To insert the mobile computer, slide the mobile computer into the Fabric Holster with the screen facing the user. 2. Pull restraining strap over mobile computer and secure in the clip. 3.
Chapter 5 Maintenance and Troubleshooting Introduction This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operation. Maintaining the Mobile Computer For trouble-free service, observe the following tips when using the mobile computer: • Do not scratch the screen of the mobile computer.
5-2 MC3000 User Guide • Do not crush, puncture, or place a high degree of pressure on the battery. • Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat. • Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer. • Do not dispose of batteries in fire.
Maintenance and Troubleshooting Table 5-1 5-3 Troubleshooting the Mobile Computer (Continued) Problem Cause Solution During data communication, no data was transmitted, or transmitted data was incomplete. Mobile computer removed from cradle or unplugged from host computer during communication. Replace the mobile computer in the cradle, or reattach the cable and re-transmit. Incorrect cable configuration. See the system administrator or refer to the MC3000 Integrator Guide.
5-4 MC3000 User Guide Table 5-1 Troubleshooting the Mobile Computer (Continued) Problem The mobile computer does not accept scan input. Cause Solution Scanning application is not loaded. Verify that the mobile computer is loaded with a scanning application. See the system administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between scan window and bar code is incorrect. Ensure the mobile computer is within proper scanning range.
Maintenance and Troubleshooting Table 5-2 5-5 Troubleshooting the Single Slot Serial/USB Cradle (Continued) Symptom Spare battery is not charging. During data communication, no data was transmitted, or transmitted data was incomplete. Possible Cause Solution Battery not fully seated in charging slot. Remove and re-insert the spare battery into the cradle, ensuring it is correctly seated. Battery inserted incorrectly. Ensure the contacts are facing down and toward the back of the cradle.
5-6 MC3000 User Guide Four Slot Ethernet Cradle Table 5-4 Troubleshooting the Four Slot Ethernet Cradle Problem Cause Solution Mobile computer amber Charge LED Indicator does not light when mobile computer inserted. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Mobile computer is not correctly seated. Remove and re-insert the mobile computer into the cradle, ensuring it is correctly seated. Mobile computer battery is not charging.
Maintenance and Troubleshooting Table 5-5 5-7 Troubleshooting the Four Slot Spare Battery Charger (Continued) Symptom Spare battery is not charging. Possible Cause Solution Charger is not receiving power. Ensure the power cable is connected securely to both the charger and to AC power. Spare battery is not correctly seated. Remove and re-insert the battery into the charger, ensuring it is correctly seated. Spare battery was removed from charger or charger was unplugged from AC power too soon.
5-8 MC3000 User Guide Cables Table 5-7 Troubleshooting the Cables Symptom Possible Cause Solution Mobile computer amber Charge LED Indicator does not light when mobile computer attached. Cable is not receiving power. Ensure the power cable is connected securely to both the cable and to AC power. Mobile computer is not seated correctly in the cable. Remove and re-attach the mobile computer to the MC3000 connector, ensuring it is correctly seated. Mobile computer battery is not charging.
Appendix A Technical Specifications Mobile Computer and Accessory Technical Specifications Table A-1 summarizes the mobile computer technical specifications and intended operating environments. Table A-2 summarizes the accessory technical specifications and the intended operating environments.
A-2 MC3000 User Guide Table A-1 Mobile Computer Technical Specifications (Continued) Item Dimensions Description MC3000S: 7.43 in L x 3.18 in W x 1.76 in D (188.7 mm L x 80.8 mm W x 44.6 mm D) MC3000R: 8.33 in L x 3.18 in W x 1.57 in D (211.6 mm L x 80.8 mm W x 39.9 mm D) MC3090G: 7.60 in L x 3.18 in W x 6.54 in D (193 mm L x 80.8 mm W x 166 mm H) Weights MC3000R (with standard battery)* - 12.9 oz (366 g) MC3000S (with extended battery)* - 14.6 oz (414 g) MC3090G (with extended battery)* - 18.
Technical Specifications Table A-1 A-3 Mobile Computer Technical Specifications (Continued) Item Description Data Capture: 1-D Decode Capability* Imaging Decode Capability* Code 39, code 128, code 93, codabar, code 11, discrete 2 of 5, EAN-3, EAN-13, EAN-128, interleaved 2 of 5, UPCA, UPCE and UPC/EAN supplements, chinese 2 of 5 (OEM version 05.26.000 and higher).
A-4 MC3000 User Guide Table A-2 Accessory Specifications (Continued) Single Slot Serial/USB Cradle Cables 5.4V, 3 A Four Slot Charge Only and Ethernet Cradles Four Slot Spare Battery Charger Universal Battery Charger (UBC) Adapter 12V, 9 A 12V, 3.3 A 15V, 1.5 A Power 12V, 3.3 A Drop 30 inches (76.
Appendix B Keypad Functions/Special Characters Introduction This appendix contains the keypad functions/special characters for the MC3000 keypads. Each function/special character is included in the table along with how the function/special character is generated. Keypads The mobile computer is available with one of four keypads: • 20-key keypad • 28-key keypad • 38-key keypad • 48-key keypad. NOTE Special characters are not available on the 20-key keypad.
B-2 MC3000 User Guide 28-Key Keypad Figure B-1 Table B-1 38-Key Keypad 48-Key Keypad Keypads Special Character Generation Map Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation 48-Key Keypad Key Sequence, Special Character Generation [ Use the Keyboard Input Panel* FUNC + 4 FUNC + T ] Use the Keyboard Input Panel* FUNC + 5 FUNC + U / Use the Keyboard Input Panel* FUNC + 9 FUNC + Q \ Use the Keyboard In
Keypad Functions/Special Characters Table B-1 Special Character Generation Map (Continued) Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation 48-Key Keypad Key Sequence, Special Character Generation ; Use the Keyboard Input Panel* FUNC + 6 FUNC + V - Use the Keyboard Input Panel* FUNC + 7 FUNC + O ` Use the Keyboard Input Panel* FUNC + 2 FUNC + Y “ Use the Keyboard Input Panel* SHIFT + FUNC + 1 Use the Key
B-4 MC3000 User Guide Table B-1 Special Character Generation Map (Continued) Special Character 28-Key Keypad Key Sequence, Special Character Generation 38-Key Keypad Key Sequence, Special Character Generation 48-Key Keypad Key Sequence, Special Character Generation ? Use the Keyboard Input Panel* SHIFT + FUNC + 9 Use the Keyboard Input Panel* _ Use the Keyboard Input Panel* SHIFT + FUNC + 7 Use the Keyboard Input Panel* { Use the Keyboard Input Panel* SHIFT + FUNC + 4 Use the Keyboard Inp
Appendix C Regulatory Introduction This appendix contains the accessory power supply regulatory compliance statements. Accessory Power Supply Regulatory Compliance Table C-1 Accessory Power Supplies, Regulatory Compliance Statements Accessory Single Slot Serial/USB Cradle Power Supply Four Slot Spare Battery Charger Power Supply Power Supplies Regulatory Compliance Statements Use only a Symbol-approved power supply output rated 12 VDC and minimum 3.3 A.
C-2 MC3000 User Guide Table C-1 Accessory Power Supplies, Regulatory Compliance Statements Accessory Four Slot Charge Only Cradle Power Supply Four Slot Ethernet Cradle Power Supply Power Supplies Regulatory Compliance Statements Use only a Symbol-approved power supply output rated 12 VDC and minimum 9 A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous.
Glossary Numeric 802.11/802.11abg. A radio protocol that may be used by the WLAN radio card. A Access Point. Access Point (AP) refers to Motorola’s Ethernet Access Point. It is a piece of communications equipment that manages communications between the host computer system and one or more wireless terminals. An AP connects to a wired Ethernet LAN and acts as a bridge between the Ethernet wired network and IEEE 802.11 interoperable radio-equipped mobile units, such as a mobile computer.
Glossary - 2 MC3000 User Guide B Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. See Symbology. Bar Code Density.
Glossary - 3 Check Digit. A digit used to verify a correct symbol decode. The scanner inserts the decoded data into an arithmetic formula and checks that the resulting number matches the encoded check digit. Check digits are required for UPC but are optional for other symbologies. Using check digits decreases the chance of substitution errors when a symbol is decoded. Codabar.
Glossary - 4 MC3000 User Guide Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded. E EAN. European Article Number. This European/International version of the UPC provides its own coding format and symbology standards.
Glossary - 5 Hz. Hertz; A unit of frequency equal to one cycle per second. Host Computer. A computer that serves other terminals in a network, providing such services as computation, database access, supervisory programs and network control. I IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation. IEC (825) Class 1. This is the lowest power IEC laser classification.
Glossary - 6 MC3000 User Guide laser scanner. A type of bar code reader that uses a beam of laser light. LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam.
Glossary - 7 Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approach near 100%. Q Quiet Zone. A clear space, containing no dark marks, which precedes the start character of a bar code symbol and follows the stop character. R RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read. Reflectance.
Glossary - 8 MC3000 User Guide Self-Checking Code. A symbology that uses a checking algorithm to detect encoding errors within the characters of a bar code symbol. Shared Key. Shared Key authentication is an algorithm where both the AP and the MU share an authentication key. SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular carriers to allow cellular devices to distinguish between the home and roaming service. Soft Reset. See Warm Boot.
Glossary - 9 U UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States. V Visible Laser Diode (VLD). A solid state device which produces visible laser light. W WAN. Wide-Area Network. A radio network that supports data communication beyond a local area. That is, information can be sent across a city, state, or even nationwide.
Glossary - 10 MC3000 User Guide
Index Numerics 20-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1, B-1 20-key mechanical keypad . . . . . . . . . . . . . . . . . . . . 2-3 28-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5, B-1 38-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, B-1 48-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . 2-11, B-1 802.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 A accessories . . . . . . . . . . . . . . . .
Index - 2 MC3000 User Guide beeper volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 bonding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 deleting bonded device . . . . . . . . . . . . . . . . . . . 3-11 dial-up networking services . . . . . . . . . . . . . . . . 3-15 disable . . . . . . . . . . . . . . . . .
Index - 3 four slot Ethernet cradle . . . . . . . . . . . . . . . . . . . . . . 1-2 four slot spare battery charger . . . . . . . . . . . 1-2, 1-8, 1-9 battery charging . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 frequency-hopping spread spectrum . . . . . . . . . . . . . 3-1 function status . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index - 4 MC3000 User Guide smart raster . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29 plastic holster . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2, 4-13 platform SDK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvi power button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 power supply regulatory compliance . . . . . . . . . . . . .
Index - 5 U UBC adapter . . . . . . . . . . . . . . . . . . . . 1-2, 1-8, 1-9, 4-1 battery charging . . . . . . . . . . . . . . . . . . . . . . . . 4-10 LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 UBC adapter LED indicators . . . . . . . . . . . . . . . . . . . . . . 4-10 UBC adapter LED charge indications . . . . . . . . . . . 4-10 universal battery charger adapter . . . . . . . . . . . .1-2, 1-8 unlock the mobile computer . . . . . . . . . . . . . . . . . . . 2-24 unpacking .
Index - 6 MC3000 User Guide
Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com/enterprisemobility MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc.
