Specifications

Maintenance and Troubleshooting 8 - 3
Mobile computer turns
itself off.
Mobile computer is
inactive.
The mobile computer turns off after a period of inactivity. This
period can be set from 1 to 5 minutes, in one-minute intervals.
Battery is depleted. Replace the battery.
Battery is not
inserted properly.
Insert the battery properly. See
Main Battery Installation on page
1-3
.
A message appears
stating that the mobile
computer memory is
full.
Too many files
stored on the mobile
computer.
Delete unused memos and records. If necessary, save these
records on the host computer.
Too many
applications installed
on the mobile
computer.
Remove unused installed applications from the mobile computer to
recover memory.
The mobile computer
does not accept scan
input.
Scanning application
is not loaded.
Verify that the mobile computer is loaded with a scanning
application. See the system administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Ensure mobile computer is within proper scanning range.
Mobile computer is
not programmed for
the bar code type.
Ensure the mobile computer is programmed to accept the type of
bar code scanned.
Mobile computer is
not programmed to
generate a beep.
Check that the application is set to generate a beep on good
decode.
Battery is low. Check the battery level. When the battery is low, the mobile
computer automatically goes into suspend mode.
Table 8-1 Troubleshooting the Mobile Computer (Continued)
Problem Cause Solution