User’s Guide Digital Video Baby Monitor Models: MBP35S, MBP35S-2, MBP35S-3, MBP35S-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Video Baby Monitor! Thank you for purchasing the Motorola Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 10 11 12 14 1 POWER 15 2 6 3 7 4 8 5 9 13 1. 2. 3. 4. 5. 6. 7. 8. 19 18 16 20 17 Display (LCD screen) Up Key + Normal Mode: Tilt Up Menu Mode: Up Down Key Normal Mode: Tilt Down Menu Mode: Down Left Key < Normal Mode: Pan Left Menu Mode: Left Right Key > Normal Mode: Pan Right Menu Mode: Right Menu Key M Press to open the Menu options OK Key O Video ON/OFF Key V Press to turn OFF the LCD display Press again to turn ON the LCD display 9. 10. 11. 12. 13. 14. 15.
Parent unit menu icons (cont’d) Volume Level Control (8 Levels) Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Song Selections) V Alarm Setting (6h, 4h, 2h, Off) Temperature scale select (ºC / ºF). Readings display in BLUE, but turn RED if > 29 ºC / 84 ºF or < 14 ºC / 57 ºF. Displays HH ºC / ºF if > 36 ºC / 97 ºF. Displays LL ºC / ºF if < 1 ºC / 34 ºF. Camera Selection (scan, view, add, delete) View multiple cameras on screen (Picture in Picture).
1. 2. Safety Instructions .................................................................................... 6 Getting Started......................................................................................... 9 2.1 2.2 2.3 2.4 2.5 3. Using the Baby Monitor .......................................................................... 12 3.1 3.2 3.3 3.4 3.5 3.6 4. Setting up .................................................................................................. 12 Pan and Tilt ..........
1. Safety Instructions WARNING: Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
ENGLISH BABY UNIT SET UP & USE: • • • • Choose a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slot in the underside of its stand. NEVER place the Baby Unit or cords within the crib. Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away).
• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. CAUTION There is a risk of fire or explosion if the parent unit battery is replaced by an incorrect type. Only use a Ni-MH rechargeable battery pack with rating: 3.6V, 900mAh. Dispose of used batteries according to their instructions.
2.1 1. ENGLISH 2. Getting Started Baby Unit Power Supply Connect the small plug of the power adapter to the baby unit (camera) and the other end to a suitable electrical outlet. NOTE Only use the enclosed power adapter (5V DC / 1000mA). 2. 3. 2.2 Slide the ON/OFF switch to the ON position. The power LED will light up in green. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off. Parent Unit Battery Installation Red Black 1.
2.3 Parent Unit Power Supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended, to allow temporary battery operation if the unit is moved. 1. 2. 3. 4. 5. Connect the small plug of the power adapter to the parent unit and the other end to a suitable electrical outlet. Only use the enclosed power adapter (5V DC / 600mA) with the Micro USB style plug. Press and hold the P POWER ON/OFF button for more than 1 second to turn ON the parent unit.
Registration (Pairing) The Baby monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1. Press the M button of the parent unit and the menu bar will pop up. is highlighted, and 2. Press the < LEFT button or > RIGHT button until the / / / menu will pop up. 3.
3. Using the Baby Monitor 3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle by panning or tilting the camera up, down, left and right until you are satisfied with the image in the parent unit.
Temperature Display (HH °C / °F or LL °C / °F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the Parent Unit LCD screen. The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F. Using the Baby Monitor 13 ENGLISH 3.
4. Parent Unit Menu Options 4.1 1. 2. 3. 4.2 1. 2. 3. 4.3 1. 2. 3. 4. 4.4 1. 2. 3. 4.5 1. 2. 3. 4. 14 Volume Press the M button and the menu bar will pop up. is highlighted. Press the < LEFT button or > RIGHT button until Press the + UP button or - DOWN button to select the desired volume level from level 0 ~ 8 . (The default volume level setting is level 4 .) Brightness Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted.
Camera Control 4.6.1 1. 2. 3. 4. 5. Add (pair) a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the / / / menu will pop up. Press the + UP button or - DOWN button to select , and press the O button to confirm. / / / will pop up, press the + UP button or - DOWN button to select the desired camera position, and press the O button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.
4.6.3 1. 2. 3. 4. Delete a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the / / / menu will pop up. Press the + UP button or - DOWN button to select , and press the O button to confirm. / / / will pop up, press the + UP button or - DOWN button to select the desired CAM, and press the O button to delete that registration. Note: You are not allowed to delete the camera if there is only one registered camera in the system. 4.6.
1. 2. 3. 4.8 1. 2. 3. Temperature ENGLISH 4.7 Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select °C or °F. Power Saving mode Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video off after 5 mins, 30 mins or 60 mins if not in charging mode.
5. Disposal of The Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 6. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals – this may cause permanent damage to the product which is not covered by the warranty. • Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF button P on the Parent Unit to turn it ON. Slide the ON/OFF switch on the Baby Unit to ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Noise interference on your parent unit • Your baby and parent units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet (1m to 2m) between the 2 units to avoid audio feedback, and reduce the volume of the Parent Unit. • lf the baby unit is too far away it may be out of range, so move the baby unit closer to the parent unit. • Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone.
8. General Information lf your product is not working properly.... 1. 2. Read this User's Guide or the Quick Start Guide. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolamonitors.com To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC, ACTA and Industry Canada (IC) Regulations FCC Part 15 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
Technical Specifications Baby unit Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 0.3M Pixels Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adapter: Ten Pao International Ltd. S005ANU0500100; Input: 100-240V, 50/60HZ 300mA; Output: 5.0V, 1000mA OR Adapter: Kuantech Incorporated Company KSAS0050500100VUD; Input: 100-240V, 50/60Hz 300mA; Output: 5.0V, 1000mA WARNING Use only with supplied power supply.
Frequency 2.4 GHz to 2.48 GHz Display 2.8" diagonal TFT LCD Display colors 16.7M color LCD Brightness control 8 steps Volume control 8 steps Power Adapter: Ten Pao International Ltd. S003GU0500060; Input: 100-240V, 50/60Hz 150mA; Output: 5.0V, 600mA ENGLISH Parent unit OR Adapter: ShenZhen Frecom Electronic Co., LTD F05W-050060SPAU Input: 100-240V, 50/60Hz 150mA; Output: 5.0V, 600mA WARNING Use only with provided power supply. Battery: GPI GPRHCH93C021 Ni-MH AAA 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved. US_EN Version 4.
