USER’S GUIDE MBP35BL, MBP35BW BABY MONITOR USER’S GUIDE The features described in this user’s guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP35BL, MBP35BW. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 1 12 5 13 2 6 11 TALK MENU 9 8 7 10 3 4 1. Display (LCD screen) 2. Up < / Down > keys Normal mode: Adjust speaker volume Menu mode: Adjust setting 3. Power and Low battery LED 4. Voice Activation ))) LED 5. Lullaby Play/Stop key i Press once to play lullaby. Press again to stop playing. 6. Lullaby selection key j Press to select a lullaby during playback. 7. Microphone 8. Menu key m Press to open the Menu options 9. Talk key t Press and hold to speak to your baby.
Parent Unit display symbols (cont’d) Appears when the Parent Unit is in registration mode. VOX Appears when setting the Voice Activation level. Overview of your Baby unit 1 7 2 3 8 6 4 9 5 1. 2. 3. 4. 5. Photo sensor Camera lens Infrared LEDs Power LED Night lights 6. 7. 8. 9.
1. Safety Instructions ......................................................................... 6 2. Getting started................................................................................ 7 2.1 2.2 2.3 2.4 2.5 Baby unit battery installation...........................................................7 Baby unit power supply ..................................................................8 Parent unit battery Installation ........................................................
1. Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device. • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This baby monitor is not a substitute for responsible adult supervision.
2.1 Baby unit battery installation The camera uses either 3 AA size batteries (non-rechargeable batteries recommended) or the household power mains. The Baby unit has no charging function! screw IMPORTANT The non-rechargeable batteries for the Baby unit are not supplied with your product. We recommend the batteries to be installed before use, so that the unit continues to work in the event of a mains power failure. 1. Loosen the screw in a counterclockwise direction using a small screwdriver.
2.2 Baby unit power supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket (230V/50Hz). NOTE Only use the enclosed power adapter (6V DC / 800mA). 2. Slide the power switch to the ON position. The power LED will light up in green. 3. To switch off the baby unit, slide the power switch to OFF position. 2.
NOTE When the battery level is low, the power LED will turn orange and will flash. Charge the battery pack for at least 15 hours before using on battery power only. NOTE When the unit is powered up with either the power adapter or using the rechargeable battery pack, the LED will light up in green. If both the power adapter and rechargeable battery pack are used, the LED will light up in red. 2.4 Parent unit power supply 1.
2. Press and hold p to switch ON the parent unit. The power LED will light up in green. 3. Press and hold p to switch OFF the parent unit. NOTE Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit. When the VOX mode is on, the screen will turn off after a few seconds if the sound near the baby unit drops below the Voice Activation threshold level of the unit.
3.1 ENGLISH 3. Using the Baby Monitor MBP35BL, MBP35BW Setting up • Place the camera in a convenient location and point the lens of the camera towards the area you want to monitor. • Tilt the head of the baby unit up or down to your desired position until the parent unit gets a good reception of the baby.
3.5 Playing a lullaby for your baby You can remotely activate a lullaby to be played on the Baby Unit. 1. Press the i button on the Parent Unit to play the last set lullaby. 2. To select another lullaby, press j during playback. There are 5 lullabies available for selection, indicated by or 1, 2, 3, 4 5. 3. To play all lullabies, press j until 4. Press i again to stop playback. is displayed on the display screen.
4.1 ENGLISH 4. MBP35BL, MBP35BW Parent Unit Menu Options Brightness 1. Press m repeatedly until appears on the display screen. 2. Press < and > to adjust the LCD brightness level to 1, 2, 3, 4, or 5 (the default setting is 3). The LCD brightness will be adjusted accordingly. 3. Press m repeatedly to exit. 4.2 Temperature Display (ºC or ºF) 1. Press m repeatedly until appears on the display screen. 2. Press < and > to change the temperature display to ºC, ºF or OFF (the default setting is ºC).
4.4 Voice Activation If you do not want the parent unit screen to be on continually, you can set the VOX mode so that the screen only turns on if there is a sound near the baby unit. The sound detection sensitivity level (VOX) of the Baby Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level can be increased so that only minor disturbances will cause the parent unit screen to turn back on. 1. Press m repeatedly until VOX appears on the LCD screen.
ENGLISH 5. Disposal of the device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
6. Cleaning Clean the MBP35BL, MBP35BW with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the Warranty. When necessary, clean it with a damp cloth. • Keep your MBP35BL, MBP35BW away from hot, humid areas or strong sunlight, and don’t let it get wet.
ENGLISH 7. Help Display No display • Try recharging or replacing the batteries. • Reset the units. Unplug the units’ electrical power, including the batteries and both mains adapters, then plug them back in. • Is the unit turned on? Press and hold p on the parent unit to turn it on. Is the VOX mode on? • Turn the VOX off (see “4.4 Voice Activation”) to keep the screen on continually. Registration If the baby unit has lost its link with the parent unit • Try recharging or replacing the batteries.
8. General Information If your product is not working properly.... 1. Read this User’s Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at: 0845 218 0890 in the UK (65) 68412668 in Singapore To order a replacement battery, contact customer service or visit our website.
BINATONE ELECTRONICS INTERNATIONAL LTD., at its sole option, will at no charge repair, replace or refund the purchase price of any Products or Accessories that does not conform to this warranty. Binatone Electronics International LTD.
ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL LTD. SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL EXTENT THESE DAMAGES OR CLAIMS MAY BE DISCLAIMED BY LAW.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorised Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, Binatone Electronics International LTD.
How to Obtain Warranty Service or Other Information? To obtain service or information, please call: 0845 218 0890 in the UK (65) 68412668 in Singapore You will receive instructions on how to ship the Products or Accessories, the shipment of which shall be at your own risk and expense, to a BINATONE ELECTRONICS INTERNATIONAL LTD. Authorised Repair Centre.
ENGLISH Technical Specifications Baby unit Frequency 2.4GHz to 2.4835GHz Maximum range Extended range up to 450 feet* *Based on unobstructed line of sight. Actual range will vary depending on surroundings. Image sensor Colour CMOS Lens f 2.5mm, F 2.
General Information
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2010. All rights reserved. Version 1.
