Motorola iDEN® Digital Multi-Service Data-Capable Phone i 80s Rel 2 Phone User’s Guide @NNTN4511A@ NNTN4511-A
www.motorola.
Table of Contents IMPORTANT! Read “Safety and General Information” on page 169 before using your i80s phone. Introduction .......................................................................................... 7 Driving Safety Tips .........................................................................................8 Getting Started.................................................................................... 11 i80s Phone Features .............................................................
Phonebook ........................................................................................... 43 Accessing Phonebook with an i2000, i2000plus, or GSM Phone.................44 Phonebook Entries and Speed Dial Numbers................................................44 Phonebook Icons ...........................................................................................45 Voice Names .................................................................................................
Using Text and Numeric Messaging .............................................................81 Using Net Alert .............................................................................................83 Using Your Phone as a Modem.....................................................................84 Mobile Originated Text Messaging................................................... 85 Message Center .............................................................................................
Playing a Voice Record ...............................................................................120 Adding to a Voice Record ...........................................................................121 Labeling a Voice Record .............................................................................121 Deleting a Voice Record .............................................................................122 Locking/Unlocking a Voice Record............................................................
Limited Warranty Motorola Communication Products (International) ......189 Patent and Trademark Information..............................................................193 Index ..................................................................................................
www.motorola.
Introduction Congratulations on purchasing your Motorola iDEN i80s multi-service, data-capable, digital, portable phone. Your i80s phone offers: • • • • • • • • • • Voice Activated Dialing — Your i80s phone offers state-of-the-art Voice Activated Dialing. Speakerphone — You can enjoy hands-free communication at the touch of a button. Speakerphone is especially great for conference calls.
Driving Safety Tips “Safety is your most important call!” Your Motorola wireless telephone gives you the powerful ability to communicate by voice — almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
Driving Safety Tips 9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10. Call roadside assistance or a special non-emergency wireless assistance number when necessary.
www.motorola.
Getting Started This section includes: i80s Phone Features Page 12 Battery Page 13 Turning Your i80s Phone On/Off Page 15 Enabling Security Page 15 Receiving Over-the-Air Programming Page 16 SIM Card Page 17 Keypad Lock Page 23 Status of Your i80s Phone Page 27 My Information Page 27 Using T9® Text Input Page 28 11
i 80s Phone Features Antenna Lanyard Hook Earpiece Volume Control Buttons Display 4-Way Navigation Key Push-To-Talk Button (PTT) Option Key Menu Key Option Key Battery Send Key Photosensor End/Home Key AlphaNumeric Keypad Punctuation Key Power On/Off Back Key/Pause Dialing Speaker Key Microphone Headset Jack Next Word Key/International Plus Dialing FRONT VIEW SIDE VIEW BOTTOM VIEW TOP VIEW Status Light Accessory Connector NOTE: Throughout the User’s Guide, the option keys C and D will be
Battery Battery Your i80s phone comes with a Lithium Ion battery. After attaching the battery, you must charge it before you use it for the first time. See “Charging Lithium Ion Batteries” on page 156 for the charging times for your phone’s battery. The first time you charge your phone’s battery, charge for 30 minutes more than the time shown on page 156. After the initial charging, the battery can be charged in the time shown on page 156.
Charging the Battery 1 With your phone’s keypad facing up, plug the charger’s accessory connector into the left side of the accessory connector on the bottom of the phone. In Process 2 If the charger has folding electrical prongs, flip open the prongs. 3 Plug the charger into an electrical outlet. NOTE: Your phone’s screen backlight will remain lit while the battery is charging.
Turning Your i80s Phone On/Off When Charging Battery Icon Display e 1 flashing bar Battery Strength NOTE: Low Battery f g h 1 flashing bar, 1 flashing bar, 3 continuous bars 1 continuous bar 2 continuous bars 31% - 60% 61% - 90% Fully Charged (90% -100%) During the charging process, the battery icon will be flashing. In addition, when the battery is fully charged, the battery icon will show a fully charged battery.
To power the phone off: 1 Press and hold p near the bottom of the phone until you see the message Powering Off. 2 Push down the antenna. Enabling Security To utilize browser functionality from your service provider, you must enable security the first time you power on your phone or within 20 days of first activation of your phone. 1 When you power on your phone for the first time, after the Ready screen appears, you will be prompted to select OK to update your browser info.
SIM Card To accept your phone programming: 1 You will receive a Net Alert with the message New Browser Message Receive Programming Info. 2 Press B under GOTO. 3 You are prompted to accept changes to your phone’s lists. Press B under OK. 4 A confirmation screen displays. Press B under OK. 5 You are prompted again to accept changes to your phone's lists. Press B under OK. 6 A confirmation screen displays. Press B under OK. 7 Press r to return to the idle screen.
Entering the PIN Depending on your service provider, your phone may or may not require you to enter a SIM PIN whenyou first use your phone. If your phone is set to require you to enter a PIN, your default SIM card PIN is: 0000. It is recommended that you change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 19). P IMPORTANT: Incorrectly entering your PIN three times causes the SIM card to be blocked. To unblock your SIM card, you must contact your service provider.
SIM Card Changing the PIN 1 From the Ready screen, press m and then press R to scroll to Settings. 2 Press B under SELECT. The Settings screen displays. 3 Press R to scroll to Security. Press B under SELECT to access the Security screen. 4 At the Security screen, press R to scroll to New Passwords. Press B under SELECT to access the New Passwords screen. 5 At the New Passwords screen, press R to scroll to SIM PIN and press B under SELECT.
Unblocking the PIN If you forget your PIN and unsuccessfully enter it three times, access to your phone will be blocked. NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code from your service provider, then read and understand the PIN unblocking sequence. When entering the key press sequence, each key press must occur within 5 seconds of the prior key press. IMPORTANT: If you unsuccessfully enter the PUK code ten times, the SIM card is permanently blocked and must be replaced.
SIM Card 1 From the Ready screen, press m and then press R to scroll to Settings. 2 Press B under SELECT. The Settings screen displays. 3 Press R to scroll to Security. Press B under SELECT to access the Security screen. 4 At the Security screen, press R to scroll to SIM PIN. Press B under SELECT to access the SIM PIN screen. 5 Press R to scroll to On or Off. On enables the SIM PIN requirement; Off disables the SIM PIN requirement. Press B under SELECT.
Inserting/Removing the SIM Card IMPORTANT: If you remove your SIM card and insert another SIM card into your phone, the following information is erased when you use the phone with the new SIM card: • Datebook Notifications • Call Filtering settings in Styles • Recent Calls List • Net Alert Notifications • Voice Records • Information stored in Memo • Voice Names for Phonebook entries and Shortcuts • Browser Bookmarks • Personalized settings IMPORTANT: Do not touch the gold-colored areas of the SIM ca
Keypad Lock 3 To insert the SIM card, very carefully place it in its holder with the gold contact side facing down. To close the SIM card cover, push it down and slide forward. 4 To remove the SIM card, slide the SIM card cover back and lift up (as in step 2). Very carefully lift the SIM out of its holder. Do not touch the gold-colored areas of the SIM card. NOTE: Protect the SIM card as you would any delicate object.
Activating Keypad Lock From the Ready screen, press m *. The message Keypad Locked displays on your phone. D Whenever a key is pressed while in Keypad Lock mode, the unlock instructions display briefly. Receiving Incoming Calls When you receive an incoming phone call (see “Receiving a Phone Call” on page 63), Keypad Lock is temporarily disabled. 1 Press B under YES or press e to answer the call. When you end the call, the Recent Calls list appears.
Keypad Lock Receiving Private Calls When you receive an incoming Private call, Talkgroup call, or call alert (see “Private Calls” on page 97), Keypad Lock is temporarily disabled. 1 Press and hold the Push-To-Talk (PTT) button on the side of the phone. Begin talking after the phone emits a chirping sound. Release the PTT button to listen. 2 When you end the call, the Recent Calls list appears. Press e or press A under EXIT to reactivate Keypad Lock and return to the Ready screen.
Receiving New Text Messages When you receive new Text Messages (see “Using Text and Numeric Messaging” on page 81), Keypad Lock is temporarily disabled. 1 When New Text Message displays, press A under EXIT to return to the Ready screen and reactivate Keypad Lock. Or, Press B under READ to read the message. Press B under SAVE or DELETE. Once you have finished, press s or press A under EXIT to reactivate Keypad Lock return to the Ready screen.
Status of Your i80s Phone Deactivating Keypad Lock From the Ready screen, press m *. The message Keypad Unlocked displays briefly. E Status of Your i 80s Phone Your i80s phone has a status light that displays at the top of the phone. The status light indicates the status of your connection. Status Light Indicator i 80s Phone Status Flashing Red Signing on to the network. Please wait. Solid Red No service or out of coverage area. Flashing Green In service/Ready to use. Solid Green In use.
• Phone Numbers of Lines 1 and 2 — your phone’s numbers are displayed in these fields. You can edit the phone numbers displayed on the My Information screen, but this does not change your phone numbers. Carrier IP — this field display’s your phone’s carrier assigned IP address. IP Addresses — these fields display the IP addresses you use to access the Internet with your phone. Circuit Data Number (Ckt) — your circuit data number is in this field.
Using T9® Text Input T9 Text Input Entry Modes Four text entry modes are available in T9 Text Input: Alpha, Word, Symbols, and Numeric. When you are using T9 Text Input, an icon in the top right corner of your phone’s display screen (next to the battery strength indicator icon) indicates the T9 Text Input entry mode you are using: Icon T9 Entry Mode Name Used For... w Alpha Standard “multi-tap” keypad text entry. # Word Entering words and punctuation with one keypress per character.
Using Alpha Mode To enter text while in Alpha text entry mode to enter letters, numbers, and symbols: • • • • • Press any button on the alphanumeric keypad to enter the letters, numbers, and symbols on that key. Type a letter then press Q to activate Caps Lock or type a letter then press R to deactivate Caps Lock. Pause briefly to leave the currently displayed character in place and move on to the next place in the text entry field. Press P to create a space in the text entry field.
Using T9® Text Input Shift and Caps Lock Press # to make the next letter typed uppercase (Shift), to make all subsequent letters types uppercase (Caps Lock), or to go back to lowercase letters. These icons appear in the top row of your display screen: • • $ for Shift to uppercase x for Caps Lock When neither of these icons appear, letters typed are lowercase. NOTE: T9 Text Input automatically makes the first letter of a sentence uppercase.
2 Type a word by using one key-press per desired letter. For example, to type “test” press NOTE: 3 8 3 7 8. The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears.
Using T9® Text Input 3 Press B under SELECT. 4 Press S to scroll to the language you want T9 Text Input to use. 5 Press B under SELECT. Using Numeric Mode To use Numeric text entry mode, choose Numeric as your text entry mode and press the number buttons on your keypad to enter numbers. Using Symbols Mode To use Symbols text entry mode: 1 Choose Symbols as your text entry mode. A row of 32 symbols appears along the bottom of your phone’s display screen, just above the display option and menu icon.
www.motorola.
Display Essentials Your i80s phone’s display screen tells you what you need to know as you use your phone. This section includes: Display Screen Page 35 Status Icons Page 36 Text Display Area Page 38 Call Information Icons Page 38 Menu Icons Page 38 Display Options Page 38 Navigating Menus and Lists Page 39 Main Menu Options Page 40 Display Screen Any time your phone is powered on, the display screen provides you with information and options.
• display options USER TIP: You can always access the Ready screen by pressing e. Status Icons Status icons provide you with information about your phone and its functions. These icons are context sensitive; meaning, the icons that appear depend on the task you are performing. Status icons appear in the two rows at the top of the display screen. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features. Icon Indicates...
Status Icons Y Packet Data Ready — phone is ready to receive data through a data cable. Z Packet Data Activity — phone is transmitting data. ] Mobile IP — phone is ready to access the Internet. { Secure Data — phone is accessing the Internet using a secure connection. . Text Message — you have one or more Text Messages or Net Alert messages. y Voice Mail — you have one or more Voice Mail messages. B Fax Mail — you have one or more Fax Mail messages. u Speaker Off — phone’s speaker is off.
Text Display Area The text display area shows menu options, messages, names, phone numbers, and other information. Call Information Icons Each of the following icons appear on the left side of the text display area of the screen, providing you with information about your phones line or lines. Icon Indicates... D In Call - phone is in an active call. E Incoming Call - phone is receiving an incoming all (not active). X Outgoing Call - phone is placing an outgoing (not active).
Navigating Menus and Lists The Ready screen display options provide quick access to two main menu features. By default, the Phonebook (PHBK) and Messages (MESG) display options appear on the Ready screen. You can control which display options appear on the Ready screen using the phone’s Personalize feature in the Settings menu (see “Changing Ready Screen Options” on page 136). The display options on screens other than the Ready screen cannot be customized.
Main Menu Options By default, the main menu options appear in the order determined by your service provider. You can change the order in which they appear by using the Personalize feature (see “Reordering Main Menu” on page 136) NOTE: The Net option may not be available for all customers. Contact your service provider for availability. To access the main menu, press m or Q from the Ready screen: Menu Item Use to ... 7 Net Browse the Web.
Main Menu Options z Call Timers Display the duration of phone calls, private or group calls, circuit data use, and Kilobytes sent and received. j Recent Calls Access a list of the last 20 sent, received, or missed calls. Calls can be made from this list. n Shortcuts Associate a menu option with a number on the alphanumeric keypad for quick and easy access. U My Info View the name, Private ID, phone numbers for lines 1 and 2, IP address, and circuit data number of your phone.
www.motorola.
Phonebook The Phonebook allows you to store up to 250 frequently used names and numbers. When you store information in your Phonebook, it is saved on your SIM card. If you move your SIM card to another SIM-based phone, you can access information in your Phonebook from that phone. NOTE: If you use a different SIM card in your phone, some information stored in the phone will be lost. See “Inserting/Removing the SIM Card” on page 22.
Accessing Phonebook with an i2000, i2000plus, or GSM Phone If you plan to use the information stored in your Phonebook with an i2000, i2000plus, or any other GSM phone, you must purchase CompanionPro. Go to www.motorola.com\iden or your service provider’s web site for more information. You can use CompanionPro to make the Phonebook information saved to your i80s phone’s SIM card accessible in this type of phone.
Phonebook Icons Phonebook Icons Icons that appear to the right of entries in your Phonebook convey information about those entries. When you enter a phone number in your Phonebook, you can designate the phone number’s type using any of the following icons: W Mobile b Pager h Private ID K Fax + Work | IP Address Q Main Z Other L Home n Talkgroup For more information on entering numbers into your Phonebook, see “Adding Phonebook Entries” on page 48.
If PHBK is not one of your display options: 1 From the Ready screen, press m. 2 Press R to scroll to Phonebook. 3 Press B under SELECT. USER TIP:You can also access the Phonebook by pressing m while your phone is on a phone call or private call. This brings you to the Phonebook screen. From this screen, you can view, sort, add, edit, and delete Phonebook entries, check Phonebook capacity, or make calls.
Sorting Phonebook Entries To view any of the phone numbers assigned to a name: 1 From the Phonebook screen, press S to scroll to the name associated with the phone number you want to see. 2 Press T to view the icons representing the phone numbers assigned to that name. 3 When the icon representing the number you want to view is displayed, press B under VIEW. If there is a Private ID or a Talkgroup number stored for the person, press m. Then press R to scroll to View and press B under SELECT.
4 Press R to scroll to the desired sorting method: Name or Speed #. 5 Press B under SELECT. Checking Phonebook Capacity Your Phonebook can store up to 250 separate numbers. To see how many entries are stored in your Phonebook: 1 From the Phonebook screen, press m to view the Phonebook Menu screen. 2 Press R to scroll to Capacity. 3 Press B under SELECT. The Capacity screen shows how many storage spaces in you Phonebook are in use and how many are empty.
Adding Phonebook Entries To add a Phonebook entry: 1 Access the Entry Details screen: From the Main Screen screen, press m. Then press R to scroll to Phonebook. Press B under SELECT. To add a [New Entry], press B under SELECT. Or, H I From the Phonebook screen, press m. Then press R to scroll to New and press B under SELECT. 2 If you want to assign a name to your Phonebook entry: With the Name field highlighted, press B under CHANGE. From the Name screen, enter the name using the alphanumeric keypad.
4 Assign a number to your Phonebook entry: With the # field highlighted, press B under CHANGE. Type the number using the alphanumeric keypad. For phone numbers, use the 10-digit format. To delete a digit, press A under DELETE. K See “Pause Digit Entry” on page 54 and “Plus Dialing” on page 55 for information on using these features when storing phone numbers in your Phonebook. NOTE: The number can be up to 20 characters long. When you are finished, press B under OK.
Adding Phonebook Entries 6 If you want to assign a voice name to the number: With the Voice Name field highlighted, press B under RECORD. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. M An ) icon appears in the Voice Name field indicating that the voice name has been recorded. USER TIP:For best results, record in a quiet environment.
Storing Numbers and Private IDs Quickly Your phone gives you two ways to store numbers quickly: from the Ready screen and from the Recent Calls list. To store a number from the Ready screen: 1 From the Ready screen, use the alphanumeric keypad to enter the number you want to store. 2 Press m to access the Dialing Menu screen. 3 With Store Number highlighted, press C under SELECT. This displays the Store To screen. 4 To store to a new entry, press C under SELECT.
Editing Phonebook Entries 3 To store a new entry, press C under SELECT. The Entry Details screen displays with the number entered in the # field and the Type field highlighted. Or, To store to an existing entry, press S to scroll the list of names in your Phonebook. Or press the first letter of the entry to jump to the entry. Once the desired entry is highlighted, press C under SELECT. The Phonebook information for that entry displays with the number entered in the # field and the Type field highlighted.
3 Press R to scroll to Edit. 4 Press B under SELECT. The Entry Details screen displays. 5 Follow the applicable instructions in “Adding Phonebook Entries” on page 48 to edit the various fields. Deleting Phonebook Entries 1 From the Phonebook screen, press R to scroll to the entry you want to delete. 2 Press m to view the Phonebook Menu. 3 Press R to scroll to Delete Contact or Delete Number. Delete Contact deletes the name and all numbers associated with that name.
Plus Dialing You can program your phone to enter all of the above information for you. All you have to do is separate each entry with a pause. If you were to program your phone to automatically input the above information, the stored data would look like this 17035551234P#P1234. In this example, the first eleven digits represent the number that must be dialed to access your voice mail. The P represents a 3 second pause. The # interrupts your greeting. The second P represents another 3 second pause.
www.motorola.
Digital Cellular The i80s phone enables you to make and receive domestic and international phone calls, make emergency calls, and be notified of a missed call.
• • Last Number Redial TTY—your phone supports TTY devices and communications. Using Direct Dial 1 From the Ready screen, use the keypad to enter the 10-digit phone number you want to call. 2 Press e to place the call. 3 Press s to end the call. NOTE: See “Plus Dialing” on page 55 for information on making international calls. If you make a mistake: • • • To clear one digit, press A under DELETE. To clear all digits, press and hold A under DELETE. To cancel, press s.
Making Phone Calls To make calls from the Phonebook: 1 From the Ready screen, if PHBK is one of your display options, press A under PHBK. Or, From the Ready screen, press m, then press R to scroll to Phonebook. Press B under SELECT. 2 Press R to scroll through the names in your Phonebook. Or, Use the alphanumeric keypad to enter the first letter of the name and press R to scroll through the names beginning with that letter. Stop when the name of the person you want to call is highlighted.
Making Calls from the Recent Calls List Your phone stores the numbers of the last 20 calls you received or sent in the Recent Calls list. 1 From the Ready screen, press R to access the Recent Calls screen. Press B under SELECT. 2 Press S to scroll through the list of received or sent recent calls until you reach the desired call. 3 To view additional information about the call: Press B under VIEW. Or, Press m to access the Rec. Calls Menu. Then press R to scroll to View and press B under SELECT.
Making Phone Calls Using Turbo Dial Turbo Dial allows you to call the numbers in your Phonebook associated with Speed Dial numbers 1 through 9 by pressing and holding the corresponding numeric key on the keypad. Press and hold a number key (1 through 9). NOTE: Turbo Dial cannot be accessed while the browser is active, nor while Keypad Lock or SIM Lock is active.
When you make TTY call, the call begins in the TTY mode you last selected. You can change the TTY mode during a call. For more information on choosing a TTY mode, see “Setting TTY Mode” on page 142. To make a call using a TTY device: Q 1 Connect one end of a 2.5mm cable into the jack on the phone. (To locate the jack, see page 12.) Connect the other end of the cord into your TTY device. 2 Enter the phone number you wish to call and press e.
Emergency Calling Emergency Calling Your phone supports emergency calling. Emergency calls can be made even when the SIM card is blocked or not in the phone. To place a call in an emergency, dial 911e. You will be connected to the nearest emergency dispatch center. If you are on an active call, you must end it before calling 911. NOTE: If you have enabled the Keypad Lock feature, you must unlock the phone’s keypad before any calls can be made, including 911 emergency calls.
For private calls, group calls, and numbers stored in your Phonebook, an icon appears to the right of the name or number and to the right of the type indicating the Phonebook type of the number used in the call. See “Phonebook Icons” on page 45 for more information about Phonebook types. For phone calls, an icon appears to the left of the name or number indicating the type of call: • • • N indicates an incoming call a indicates an outgoing call V indicates a missed call.
Recent Calls The screen that appears displays information such as the name associated with the number of the recent call, the number, the date, time, and duration of the call. Storing a Recent Call Number to the Phonebook To store a number from the Recent Calls list to the Phonebook: 1 From the Recent Calls screen, press S to scroll to the number you want to store. 2 Press B under STORE. Press B under SELECT. This displays the Store To screen with [New Entry] highlighted.
To delete all calls on the Recent Calls list: 1 From the Recent Calls screen, press m to access the Rec. Calls Menu. 2 Press R to scroll to Delete All. 3 Press B under SELECT. 4 Press A under YES to confirm the deletion. Accessing Voice Record From Recent Calls You can access the Voice Records feature from Recent Calls and use it to record spoken messages that you can listen to later. 1 From the Recent Calls screen, press m to access the Rec. Calls Menu. 2 Press S to scroll to Voice Records.
Hands-Free Speakerphone • Prvt/Grp Lifetime — displays the total minutes of all your Private and Groups calls. Circuit Reset — keeps a running total of all of your circuit data use, until you reset it. Circuit Lifetime — displays the total minutes of all of your circuit data use. Kbytes Reset — keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it. • • • To view the Call Timers menu: 1 From the Ready screen, press m. 2 Press R to scroll to Call Timers.
To turn the speakerphone on: While on an active call, press B under SPEAKER. While speakerphone is on, Spkrphone On appears in the text display area. To turn the speakerphone off: Press B under SPEAKER. Mute Use the Mute feature to listen to incoming audio without allowing sound from your phone’s microphone to be transmitted over the phone line. To turn mute on: Press B under MUTE. While mute is on, UNMUTE appears as a display option. To turn mute off: Press B under UNMUTE.
Call Waiting If you’re on a call and you receive a second call, you will: • • Hear a tone; and See a message on your display informing you of another incoming call. Accepting Calls e Press B under YES. The first call is placed on hold. Switching Between Calls When you accept a second call while you are talking on the phone, your display shows the name or number of each call. An icon appears to the left of each name or number indicating that the call is on hold z or active D.
Turning Off Call Waiting If you do not want to be interrupted during a call, you can turn Call Waiting off prior to making/receiving a call. 1 From the Ready screen, press m. Press R to scroll to Settings, and press B under SELECT. 2 Press R to scroll to In Call Setup and press B under SELECT. 3 Press R to scroll to Call Waiting and press B under CHANGE. 4 Press R to scroll to Off and press B under SELECT. Call Waiting is now disabled for the next call.
Three-Way Calling To toggle between the two calls: Press B under SWITCH. To end the active call: Press s. The call on hold becomes active. Three-Way Calling Using Three-Way Calling, you can combine two ongoing phone calls into one conversation. While on an active call, you can make a second call and combine the two calls. When you place or receive a phone call, the 3-WAY option appears in the bottom right-hand corner of the display screen. To make a three-way call: 1 Place or receive a phone call.
7 Press S to scroll to 3 Way. 8 Press B under SELECT. Both calls will appear on your display. Call Forwarding Call Forwarding forwards calls to the number you designate. The following Call Forwarding options are available: • • • Off — No calls are forwarded. All Calls — When this option is turned on, all calls will be sent automatically to a number you specify.
Call Forwarding NOTE: K Line 2 is active; calls from Line 2 are being forwarded. L Line 2 is active; calls from Line 1 and Line 2 are being forwarded. Call Forwarding must be set to Detailed with the Voice Mail access number to receive Voice Mail messages. This is the default setting. Turning On Call Forwarding 1 Press m then press R to scroll to Call Forward. 2 Press B under SELECT. 3 At the Call Forward screen, the Forward field is highlighted. Press B under CHANGE.
7 To activate a call forwarding number: If you have never used Call Forwarding before, the Forward screen appears. To enter a call forwarding number, type the number on your phone’s keypad or press B under SEARCH to select from numbers stored in your phone. Press B under OK. Or, If you have used Call Forwarding before, the call forwarding number you last used is displayed. Press B under CHANGE to access the Forward screen. To forward your calls to this number, press B under OK.
Call Forwarding 3 Press R to scroll to the To field and press B under CHANGE. 4 Press S to scroll to Off and press B under SELECT. NOTE: You can use the Detailed setting to forward calls to other numbers if desired. However, it is recommended that you leave Detailed set to the Voice Mail access number and use the All Calls setting if you wish to forward your calls to another number.
6 Enter your Voice Mail access number. Your Voice Mail access number is the first six digits of your 10-digit phone number, followed by 6245. (For example 7035556245.) 7 Press B under OK. 8 Repeat step 3 through step 7 for the If No Answer field and the If Unreachable field. 9 When finished, press A under EXIT. NOTE: You can use the Detailed setting to forward calls to other numbers if desired.
Messages The main topics covered in this section are listed below: NOTE: Message Alerts Page 77 Message Center Page 79 Using Voice Mail Page 80 Using Text and Numeric Messaging Page 81 Using Net Alert Page 83 Using Your Phone as a Modem Page 84 If your service provider supports mobile originated text messaging, see “Mobile Originated Text Messaging” on page 85. Your Message Center will look slightly different than the one described in this section.
Your phone screen displays message alerts as follows: Message Type Voice Mail Text Messages Net Alert Display f i ] These message alert screens appear if the new message is the only message you have. www.motorola.
Message Center Dismissing Alerts When you dismiss a message alert, the message alert display disappears from the screen and your phone stops sounding alert tones, but the message is not deleted. You can access the message through the Message Center. See “Message Center” on page 79 for more information. Message Center The Message Center enables you to access all messaging services through one screen.
Using Voice Mail Transferring Calls to Voice Mail Press B under NO while your phone is ringing to transfer incoming calls directly to Voice Mail. Accessing New Messages When you receive a message, you can: Listening to a Message Immediately Press B under CALL to log into your Carrier’s Voice Mail System. Calling displays as you are connected to the network. Listening to a Message Later Press B under EXIT. The y icon will appear on the Ready screen to remind you that you have a stored Voice Mail message.
Using Text and Numeric Messaging Accessing All Messages 1 From the Message Center screen (see “Message Center” on page 79), press S to scroll down to Text Msgs. The number of new messages and the total number of messages are displayed. 2 Press C under SELECT. The Text Msg Inbox screen appears. 3 Press S to scroll to the message you want to read and press C under READ. 4 If the message fills more than one screen, use S to scroll through the rest of the message.
• Allow for “Auto Call Back” of a phone number that is included within a message, by pressing e. If the message contains two phone numbers, Auto Call Back will dial the last number. Accessing New Messages When you receive a message, you can view it immediately or later: View a Message Immediately 1 Press B under READ. The message displays. 2 If the message fills more than one screen, use S to scroll through the rest of the message. 3 Press A under SAVE to save the message.
Using Net Alert 5 Press A under SAVE to save the message. Or, Press B under DELETE to delete the message. Accessing All Messages 1 From the Message Center screen (see “Message Center” on page 79), press S to scroll down to Text Msgs. The number of new messages and the total number of messages are displayed. 2 Press C under SELECT. The Text Msg Inbox screen appears. 3 Press S to scroll to the message you want to read and press C under READ.
If you choose to exit the screen and view the message later, the . icon will appear on the second line of the Ready screen to remind you that you have a stored message. You can view new or stored Net Alert messages at any time by accessing the Message Center. For more information, see “Message Center” on page 79. Using Your Phone as a Modem NOTE: Some features may be network dependent or subscription only, and may not be available in all areas. Contact your service provider for more information.
Mobile Originated Text Messaging Mobile originated text messaging allows you to communicate with other message cable devices to send and receive brief text messages. Received messages appear on your phone display or in your text message inbox. NOTE: This is a network suppositions dependent feature. Please consult with your service provider for availability.
If MESG is not one of your display options: 1 From the idle screen, press q. 2 Press R to scroll to Messages. 3 Press C under SELECT. The Message Center screen displays the number of messages you have in each message service: • • • • • Voice Mail Text Inbox (Text and Numeric Messages) Net Alert — Consult your Service Provider for availability. Quick Notes — user-customizable list of canned messages. Text Outbox — contains messages which the phone has sent or is trying to send.
Text Msg Setup Message Icons The following icons appears depending on the type of message. Icon Description Message Sent and Confirmed Message Sent Attempted (if this doesn’t change to the Message Sent Confirmed icon, resend the message again).
3 In the Text Msg Setup screen, Signature is highlighted. Press C under CHNGE. Type in your name (up to 11 characters) which will be your signature. Press C under OK. NOTE: Each time you create a message, you will have to add the signature. 4 From the Text Msg Setup screen, the Srvc Cntr No field will be highlighted. Press C under CHNGE. NOTE: You must use the “+” dialing code and country code as part of the service center number.
Text Message Inbox NOTE: The Inbox memory space can hold 14 messages with a maximum length of 160 characters for each message. Receiving a Text Message When you receive a new message, your phone displays New Message and gives an alert. NOTE: You must set up the text message inbox before you can receive text messages. See“Text Msg Setup” on page 87. Press C under READ to open the message (or your text message inbox if there are multiple messages).
Accessing Quick Notes 1 From the Message Center screen, press S to scroll to Quick Notes. Press C under SELECT. 2 In the Quick Notes screen, [New Quick Note] is highlighted. Press C under CREATE. 3 Type the note that you want to store as a Quick Note. Press C under STORE. Or, Press C under BROWSE to access the Quick Notes screen. There is a list of pre-installed notes. Press R to scroll to the desired choice. Press C under SELECT. Then press C under STORE. A confirmation screen appears.
Text Message Outbox Creating Text Messages 1 From the Message Center screen, press S to scroll to Text Outbox. Press C under SELECT. 2 In the Text Outbox, [Create Msg] is highlighted. Press C under CREATE. 3 With the To field highlighted, press C under CHNGE to access the To screen. Type the number of the person that you are sending the message to. Or, Press C under BROWSE to access the Search menu. You will have the choice to select Recent Calls, Phonebook or Memo to obtain an existing number.
5 With the Report field highlighted, press C under CHNGE if you want to change the selection. Press R to scroll to YES. Press C under SELECT. The New Message screen returns with the Send As field highlighted. Or, With the Report field highlighted, press P to scroll to select YES. Press R to scroll to Send As field. This submits a request to confirm delivery of your message. 6 You can specify the type of message that you want to send. The default is Text.
Text Message Outbox Sending a Message 1 From the New Msg Menu screen, with the Send field highlighted, press C under SELECT. Or, Press s to send the message. A confirmation screen appears. Press C under YES to send the message. 2 The message will be sent. Managing the Outbox The Text Message Outbox also allows you to manage your messages. You can resend a message that has been previously sent, lock, or delete messages.
Deleting messages from the Outbox Screen and Read Screens 1 From the Text Msg Outbox screen, highlight the message that you would like to delete, press q to go to the Outbox Menu screen. 2 The Outbox Menu screen appears with Delete highlighted. Press R to scroll to Delete the message or scroll to Delete All if you want to delete all your messages. Press C under SELECT. NOTE: Deleting all messages will only remove those messages that are not locked.
Text Message Outbox 2 In the Drafts Folder screen, [Create Msg] is highlighted. Press C under CREATE. 3 Follow step 3 through step 6 for “Creating Text Messages” on page 91. 4 Press R to scroll to Save as Draft. Press C under SELECT. A confirmation screen will appear stating the message has been stored. 5 Press s to return to the idle screen. Editing the Drafts Folder 1 From the Drafts Folder screen, press R to scroll to the draft that you want to edit. Press q to access the Drafts Menu screen.
Accessing the Memory Meter from Text Inbox 1 From the Message Center screen, press R to scroll to Text Inbox. Press q to access the Msg Center Menu screen. 2 Press S to scroll to Memory Meter. Press C under SELECT. 3 In the Inbox Memory Meter screen, you will see how much memory is available. 4 Press C under BACK to go back to the Message Center screen. Accessing the Memory Meter from Text Outbox 1 From the Message Center screen, press R to scroll to Text Outbox.
Private and Group Calls The main topics covered in this section are listed below: Private Calls Page 97 Call Alerts Page 99 Group Calls Page 104 Private Calls There are several ways to reach an individual using Private calls: • • • • Enter the person’s Private ID from the keypad. Select the person’s Private ID from the numbers in your Phonebook. Select the person’s Private ID from the numbers in your Recent Calls list. Use voice-activated dialing.
Making a Private Call from the Phonebook If you have stored a person’s Private ID in your Phonebook, you can use your Phonebook to make a Private call to that person: 1 From the Ready screen, press m. 2 Press R to scroll to the Phonebook. Press B under SELECT. 3 From the Phonebook screen, press S to scroll through the names until the desired name is highlighted. 4 Press and hold the PTT button on the side of the phone. Begin talking after the phone emits a chirping sound.
Call Alerts USER TIP: If you have difficulty making calls using a voice name, try assigning a longer voice name to the number. For example, if the voice name “Joe” fails to place a call to Joe Smith’s number, try assigning the voice name “Joe Smith” to the number. 1 From the Ready screen, press and hold t on the side of your phone until the Say Name Now screen appears. 2 Speaking into the microphone, say the voice name assigned to the Private ID you want to call.
Placing a Call Alert from the Keypad 1 Enter the Private ID of the person you want to call. 2 Press B under ALERT. The Ready to Alert screen displays. 3 Press and hold the PTT button until Alert Successful displays. The alert sounds intermittently until the user of the phone answers, queues, or clears the alert. Placing a Call Alert from the Phonebook 1 From the Ready screen, press m. 2 Press R to scroll down to Phonebook. Press B under SELECT.
Call Alerts For call alerts placed from the keypad, pressing A under CANCEL causes the phone to return to the Dial screen with the previously entered number displayed. For call alerts placed from the Phonebook, pressing A under CANCEL causes the phone to return to the Phonebook screen. If you do nothing, the phone will revert to the Ready screen. • • • Receiving Call Alerts When you receive a call alert, your phone emits a chirp and displays the name or number of the caller.
Viewing Call Alert Date and Time To find out the date and time a call alert was received: 1 From the Call Alert Queue screen, press S to scroll to the desired call alert. 2 Press m to access Call Alert Menu. 3 Press R to scroll to View. 4 Press B under SELECT. Sorting Call Alerts To sort your call alerts by the order they were received: 1 From the Call Alert Queue screen, press m to access Call Alert Menu. 2 Press S to scroll to Sort By. 3 Press B under SELECT.
Call Alerts Responding to a Call Alert From the Queue 1 From the Call Alert Queue screen, press S to scroll to the call alert you want to respond to. You can respond by sending a call alert or placing a Private call. 2 To send a call alert, press B under ALERT and then press the PTT button. Or, To place a Private call, press the PTT button. The call alert will be removed from the queue.
3 Press B to SELECT. 4 When the confirmation screen appears, press B under YES to delete the entry. Group Calls In a Group call, you can communicate instantly with a group of people that you have previously set up as a Talkgroup. Group calls go out to all members of the Talkgroup at the same time. Your sales representative must set up your Talkgroups by providing you with a Talkgroup number for each Talkgroup.
Group Calls You make Group calls just as you would Private call, with a few exceptions: when making Group calls from the keypad, press # before entering the Talkgroup number. when making Group calls from the Phonebook, scroll to the Talkgroup you want to call. when making Group calls from the Recent Calls list or as the most recent call, the Talkgroup icon n indicates a Talkgroup number.
Or, 1 From the Phonebook screen, press R to scroll to the name of the Talkgroup you want to call. Or, If the Talkgroup you want to join is on your Recent Call list, go to the Recent Call screen and press R to scroll to the name of the Talkgroup you want to call. 2 Press C under JOIN. Group-Silent Programming Group-Silent programming enables you to silence incoming Group alerts and communication. Turning Group-Silent On or Off 1 From the Ready screen, press m. 2 Press R to scroll to Settings.
Datebook The Datebook is a calendar in your i80s phone that enables you to schedule and organize events, such as appointments and meetings. Schedules can be created and viewed for specific days, and reminder alarms can be set so that you never miss important events. You can view upcoming events by week or by day. The Datebook stores and manages 250 events over a 13-month period (12 months ahead and 1 month back). NOTE: The time and date format and the year used in Datebook can be set by you.
Datebook Icons There are several icons commonly used in the Datebook application: Symbol Description C Event without a start/ end time f More options are available j Recurring Appointment I Datebook Alarm G Used to move through fields when setting a time and date. Viewing Your Datebook To access your Datebook: 1 From the Ready screen, press m. 2 Press R to scroll to Datebook. 3 Press B under SELECT.
Viewing Your Datebook Viewing a Week When you access your Datebook, the current week is displayed. You can scroll to other weeks by pressing S. The dates of the displayed week appear at the top of the text area of your phone’s screen. c Displayed week Days of week Events Event with no time Below the dates are letters indicating the days of the week. When you access your Datebook, the current day is highlighted. You can scroll to other days by pressing T.
Viewing Event Details To view the details of an event: 1 Select and view the day containing the event you want to view. 2 Press S to scroll to the event. 3 Press B under VIEW. This displays event details such as day of week, time, title, duration, alarm time, and repeat cycle. For more information about events, see “About Datebook Events” on page 110. Viewing Today You can easily go to the current day when viewing your Datebook: 1 While viewing any week, day, or event, press m.
Adding New Events Adding New Events Using the following instructions, you will enter the information in the order the items appear on the Event Form screen. However, you can enter this information in any order by pressing S to scroll through the items on the Event Form screen. You can leave any item blank or unchanged by pressing S to scroll past it on the Event Form screen. Only a title and a date are required for a valid event.
3 Assign a title to the event: Press B under BROWSE to choose from a list of commonly used event titles. Press S to scroll to the title you want and press B under SELECT. Or, Type the title using the alphanumeric keypad. See “Using T9® Text Input” on page 28 for information about entering text into this field. You can also enter a description of the appointment or any other text. When you are finished, press B under OK. The Event Form screen returns with the Start field highlighted.
Adding New Events 6 The default date assigned to an event is the day that was highlighted when you accessed the Event Form screen to add the event. To assign a different date: With the StartDate field highlighted, press B under CHANGE. From the StartDate screen, enter the date of the event: Type in the date, or press S to scroll through the months, days, and years. Press T or press B under -->Gto move through the fields. Press A under DONE. The Event Form screen returns with the Repeat field highlighted.
9 If you want your phone to change to a style you have defined when the event occurs (see “Styles” on page 145): Press S to scroll to the Style field. Press B under CHANGE. From the Style screen, you see a list of styles you have created. Press S to scroll to the desired style. Press B under SELECT. 10 When you have entered all the desired information about the event, press A under DONE. Editing Events 1 h X If you are viewing the event: Press B under EDIT.
Deleting Events Deleting Events 1 View the day containing the event and press S to scroll to the event you want to delete. Or, View the details of the event you want to delete. 2 Press m. The Datebook Menu displays. 3 Press R to scroll to Delete and press B under SELECT. 4 If the event is a recurring event, the Delete Event screen appears: • To delete only the occurrence of the event you select in step 1, leave This Event Only highlighted.
Customizing Datebook Set Up Datebook allows you to customize some of its set up features: • DailyBegin — sets the beginning time of the 12-hour day your Datebook displays when you are viewing a week. Reminder — controls the behavior of alarms you have set in Datebook: • Active Only sets Datebook to ignore alarms that occur when your phone is powered off. • Delayed If Off sets Datebook to delay alarms that occur when your phone is powered off until your phone is next powered on.
Memo The Memo application provides you with a place to store a numeric note (for example a phone number) in your i80s phone. This section includes: Adding a New Memo Page 117 Viewing a Memo Page 117 Editing a Memo Page 118 Deleting a Memo Page 118 Adding a New Memo 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press B under SELECT. The Memo screen displays. 4 Type your numeric memo using the phone’s keypad. 5 Press B under STORE.
Editing a Memo 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press B under SELECT. 4 Type the new number. You can delete a digit by pressing A under DELETE. To all the digits, press and hold A under DELETE. 5 Press B under STORE. Deleting a Memo 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press B under SELECT. 4 Press and hold A under DELETE. 5 Press B under STORE. www.motorola.
Voice Record The Voice Record feature enables you to record and play back personal messages or the incoming portion of phone calls on your i80s phone.
Recording a Voice Record NOTE: Recording of phone calls is subject to varying State and Federal laws regarding privacy and recording of phone conversations. To record a personal message as a Voice Record: 1 From the VoiceRecord screen, press R to scroll to [New VoiceRec]. 2 Press B under RECORD and speak the message you want to record into the microphone. 3 When you are finished recording your Voice Record, press B under STOP.
Adding to a Voice Record Adding to a Voice Record After you create a Voice Record, you can record more at the end of the existing Voice Record: 1 From the VoiceRecord screen, press R to scroll to the Voice Record you want to add to. 2 Press m to view the VoiceRecd Menu. 3 Press R to scroll to Add To. 4 Press B under SELECT and speak the message you want to record into the microphone. 5 When you are finished recording, press B under STOP.
Deleting a Voice Record To delete a Voice Record: 1 From the VoiceRecord screen, press R to scroll to the Voice Record you want to delete. 2 Press m to view the VoiceRecd Menu. 3 Press R to scroll to Delete and press B under SELECT. 4 A confirmation screen appears. Press A under YES to confirm. To delete all unlocked Voice Records: 1 From the VoiceRecord screen, press m to view the VoiceRecd Menu. 2 Press R to scroll to Delete All and press B under SELECT. 3 A confirmation screen appears.
Voice Record Memory Voice Record Memory Typically, you can store 20 Voice Records with a total time of about three minutes. To check the amount of memory available for a Voice Record: 1 From the VoiceRecord screen, press m to view the VoiceRecd Menu. 2 Press R to scroll to Memory. 3 Press B under SELECT to display the Memory Meter screen. The memory meter shows the amount of Voice Record memory space currently in use. It fills in from left to right as your Voice Record memory space fills up.
www.motorola.
Java The Java feature of your i80s phone runs applications written in the Java 2 Micro Edition programming language. The phone comes with Java applications downloaded and ready for installation. You can choose to order or purchase Java applications and download them into your phone via the Internet. For more information, see “Downloading Java Applications” on page 127.
Installing Java Applications To install a Java application: 1 From the Java Apps screen, press R to scroll to the desired application. 2 To determine whether the application needs to be installed, look at the display options on the screen. If the display option is RUN or SELECT, the application is already installed and ready to run. See “Running Java Applications” on page 126. If the display option is INSTALL, press B under INSTALL to install the application.
Downloading Java Applications To resume a suspended application: Press B under RESUME. To stop running an application: Press s and then press A under EXIT. Downloading Java Applications You can customize your phone by ordering additional Java applications via the iDEN Update Website. Please go to www.motorola.com/idenupdate for a selection of applications available and downloading instructions.
You may free more Data Memory and Program Memory space by deinstalling an application that you do not wish to use. Deinstalled applications that were obtained from iDEN Update may be redownloaded at a later time at no cost. For information on deinstalling, see “Deinstalling Java Applications” on page 128. NOTE: Java applications are stored in your phone using the same memory space used to store Voice Records.
Customizing the i80s Phone You can customize your i80s phone to fit the way you want to use it. The phone’s Settings menu enables you to control many of the phone’s features and functions, including display properties, message handling, and security features. The Styles feature enables you to group screen display, ring, and call answering features together and save them for quick and easy access.
From the Settings screen, you can access these Settings options: • Ring/Vibe — controls how your phone rings or vibrates when you receive calls and messages. Phone Setup — sets call-answering features, chooses which phone line is used, and sets your network ID. In Call Setup — sets call timer, message notification, and call waiting features. Security — sets security features including phone lock, keypad lock, and SIM PIN.
Settings Menu Main Options Ring/Vibe provides these main options: • • • Ringer Vol — sets ring volume. Keypad Vol — sets volume of sounds associated with keypad actions. Mail Vol — sets volume of Text Message, Voice Mail, and Net Alert notifications. Java/Data Vol — sets volume of sounds made by Java applications. Headset — choosing the HdsetOnly option prevents sound from being emitted from the phone’s speaker when the headset is being used.
3 Press S to scroll to Off or On. 4 Press B under SELECT. The following icons appear on your display screen to indicate the options you have chosen: Icon Indicates... - Vibrate All - phone is set to vibrate when you receive all types of calls, messages, and alerts; the VibeAll option is On. [ Vibrate On - phone is set to vibrate when you receive phone calls. \ Vibrate Then Ring - phone is set to vibrate and then ring when you receive phone calls. * Silent - phone is set not to ring.
Settings Menu USER TIP: To hear the ring style you have selected, press the volume button on the side of your phone. Notification Types When you set a notification type, you have these options: • • • Ring — the phone rings to notify you. Vibe — the phone vibrates to notify you. Vibe/Ring — the phone vibrates and then rings to notify you. This option is only available for calls on Line 1 and Line 2. Silent — the phone does not ring to notify you.
• Network ID — enables you to set the phone’s network IDs and their roaming options. In Call Setup In Call Setup sets the in-call timer, message notification, and call-waiting features. • • • The In Call Timer option turns the following features on and off: • Display — the duration of each call displays on the phone’s screen when the call ends. • Minute Beep — an audible beep occurs every minute of an active call.
Settings Menu The Unlock code is required to enable the phone lock feature, to unlock the phone, and to set a new Unlock code. Contact your service provider for your default Unlock code. Phone lock provides two options for locking the phone: • • Lock Now locks the phone immediately after you set the option. Auto Lock locks the phone the next time the phone is powered on. Setting Keypad Lock Choosing the Keypad Lock option displays instructions for locking and unlocking your phone’s keypad.
Personalize Personalize contains three options that control which major features are easiest to access when you turn on your phone: • • Main Menu — changes the order of the items on your main menu. Keys — controls which main menu items appear above the two option keys on the Ready screen. Power Up App — sets any of the programs on the main menu to run when you turn on your phone.
Settings Menu 3 To change the option assigned to the left option key, press B under CHANGE while Left is highlighted. 4 Press R to scroll to the option you want to assign to the left option key. 5 Press B under SELECT. 6 To change the option assigned to the right option key, press R to highlight Right and press B under CHANGE. Repeat steps 4 and 5 for the right option key. Changing Power-Up Program Your phone is set to display the Ready screen when it is powered on.
NOTE: • • • • • • • • • • • • • • Changing the current year may affect stored Datebook events. Datebook stores events 12 months ahead and one month before the current date. Events outside this range will be deleted. See “Datebook” on page 107 for more information. Auto Redial — turns the automatic redial feature on and off. Backlight — controls how long your phone’s backlight stays on. Sensor - controls the photo sensor to activate the backlight when your phone is in poor lighting conditions.
Settings Menu To set the time and date format, or turn time and date display on or off: 1 From the Initial Setup screen with Time/Date Format highlighted, press B under SELECT to access the Time/Date Format screen. 2 To change the time format: With Time Format highlighted, press B under CHANGE to access the Time Format screen. Press S to highlight the time format you want. Press B under SELECT.
Setting Backlight Timer The backlight illuminates the display when you receive or make calls. You can set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or set it to stay on continuously or stay off at all times. 1 From the Initial Setup screen, press R to scroll to Backlight. 2 Press B under CHANGE. 3 Press S to scroll to the desired backlight option. 4 Press B under SELECT.
Settings Menu Setting Scrolling You can set your phone to scroll through menus and lists in either of two ways: • Up/Down — when you reach the bottom or top of list or menu scrolling stops until you scroll in the other direction. Wrap Around — when you reach the bottom or top of a list or menu scrolling “wraps” around and continues at the other end of the list or menu. • You can set the scrolling style from the Initial Setup screen using the Scroll option.
Setting TTY Mode TTY Setup enables you to set your options for using your phone with a teletypewriter (TTY) device. By default, your phone is set to function with a TTY device in TTY mode. Your phone supports the following TTY modes: • • TTY — for calls in which you type and read text on your TTY device. VCO (Voice-Carry-Over) — for calls in which you speak into your phone and read text replies on your TTY device.
Settings Menu Setting TTY Baud Rate NOTE: This feature may not be offered by your service provider. By default, your phone’s TTY baud rate is set to 45.45, the baud rate required for TTY calls within the US. To make calls outside the US, set your TTY baud rate to 50.0. To change the TTY baud rate: 1 From the Initial Setup screen, press R to scroll to TTY Baud. 2 Press B under CHANGE. 3 Press S to scroll to the baud rate for your location. 4 Press B under SELECT.
3 Press S to scroll to the desired display option. 4 Press B under SELECT. Voice Volume Voice Volume sets the volume of the sound coming from your phone’s earpiece or speaker: 1 From the Voice Volume screen, highlight Earpiece Vol to set the earpiece volume, or press R to scroll to Speaker Vol to set the speaker volume. 2 Press B under CHANGE. 3 To select a volume level: Press T to raise of lower the volume setting. Or, Press the Volume Control buttons on the side of your phone.
Styles Styles This feature enables you to save a group of settings for call and message notification, screen display, and call answering features. You save your selections as a “style” and access them at any time. You can store up to ten styles. The Styles feature enables you to save a group of settings for call and message notification, screen display, and call answering features. You save your selections as a “style” and access them at any time. You can store up to ten styles.
• • • activate a style or turn off the currently active style create a new style access the Styles Action menu for more Styles functions Creating a Style When you create a style, you give it a name and set the features of that style. The name of the style then appears on the Styles Menu. To create a style: 1 From the Styles Menu screen, press R to scroll to [New Style]. 2 Press B under SELECT.
Styles Editing a Style To change the settings of a style: 1 From the Styles Menu screen, press R to scroll to the name of the style you want to edit. 2 Press m to access the Styles Action menu. 3 Press R to scroll to Edit and press B under SELECT. 4 To change any style option: Press R to highlight the option. Press B under CHANGE or SELECT. Use the screens that appear to make your changes. 5 When all the style options have the settings you want, press A under DONE.
Turning Off a Style To turn off a style without activating another style: 1 From the Styles Menu screen, press R to scroll Off. 2 Press B under SELECT. Using the Styles Actions Menu When you highlight a style on the Styles Menu, you can then access the Styles Actions menu for additional Styles functions. To access the Styles Actions menu, press m from the Styles menu. The Styles Actions menu provides the following options: • • • • • • View — view settings of the highlighted style.
Styles • • • Off sets your phone notify you of all calls. All sets your phone to ignore all calls. All Phonebook sets your phone to notify you only of calls from the numbers stored in your Phonebook. Some Phonebook sets your phone to notify you only of calls from numbers you select from your Phonebook. You may choose up to five Phonebook entries. • To choose Phonebook entries that you want your phone to respond to calls from: 1 From the Call Filter screen, press R to scroll Phone.
Setting Message Notification Filtering Call Filter enables you to set your phone to notify you of some types of messages, all types of messages, or no messages: • • • Off allows your phone to notify you of all messages. Voice Messages allows your phone to notify you of Voice Mail messages. Text Messages allows your phone to notify you of Text Messages messages. All prevents your phone from notifying you of all messages.
Shortcuts 4 A screen displays showing the assigned shortcut number. If you want to change the shortcut number: Press A under CHANGE. Press A under DELETE to erase the assigned number. Enter the desired number on your keypad and press A under OK. 5 If you want to record a voice name for that shortcut: Press R to highlight the Voice field. Press C under RECORD. As directed by the screen prompts, say and repeat the name you want to assign to the shortcut. Speak clearly into the microphone.
Or, 1 From the Ready screen, press m. 2 Press R to scroll to Shortcuts. 3 Press B under SELECT. 4 Press S to scroll to the shortcut you want to use. 5 Press B under GOTO. Or, if you have assigned the shortcut a voice name: 1 From the Ready screen, press and hold t at the bottom of your phone until the Say Name Now screen appears. 2 Say the voice name assigned to the shortcut into your phone’s microphone. 3 Your phone will play the voice name back to you.
Shortcuts 3 Press B under SELECT. 4 Press S to scroll to the desired shortcut. 5 Press m .
www.motorola.
Accessories To order additional accessories, log on to our Web site at: www.motorola.com/ store/iden or contact your Motorola Authorized Retailer.
Batteries For best results, charge the batteries within the temperature range of 10oC to 40oC (50oF to 104oF). Prolonged charging is not recommended. For battery charging guidelines, see table below. Charging Lithium Ion Batteries The following table provides the approximate time to fully charge a battery using a Motorola iDEN Approved Lithium Ion battery charger. Check the kit number on your battery and charger to determine the appropriate charging time.
Travel Chargers • • • The Motorola iDEN Approved Lithium Ion chargers will provide optimum performance. Other chargers may not fully charge your iDEN Lithium Ion battery or may yield reduced number of lifetime charge cycles. If the battery appears inoperative, the internal protection circuitry may have been activated. Remove the battery from the phone and put it into the charger for several minutes to reset the circuitry. When batteries are not in use, always store them in the plastic safety tray.
Using the Travel Charger 1 While holding the phone with its keypad facing up, insert the accessory connector (with the Motorola logo facing you) into the bottom of the phone until you hear a click. 2 If you have either the Mid-Rate Multi-Voltage Travel Charger or the Rapid Multi-Voltage Travel Charger, flip open the prongs, and plug the Travel Charger transformer into an AC wall outlet. Or If you have the Mid-Rate Economy Travel Charger, plug the Travel Charger transformer into an AC wall outlet.
Carrying Solutions Using the Swivel Carry Clip 1 Ensure that the phone is powered off before attempting to detach the battery. 2 Attach the Phone Clip to the phone by removing the battery. Holding the phone face down, remove the battery by sliding the battery release button backwards, while lifting in an upward and outward motion. Battery Release Button 3 Slide the Phone Clip under the slotted lip and reattach the battery. 4 Slide the Phone clip into the belt clip until a secure click is heard.
Removing the Swivel Carry Clip 1 Ensure that the phone is powered off before attempting to detach the battery. 2 Holding the phone face down, remove the battery by sliding the battery release button backwards, while lifting in an upward and outward motion. Battery Release Button 3 Slide the Phone clip in a downward motion. This will unclip the assembly from the phone.. www.motorola.
Data Accessories Data Accessories RS232 Data Cable The RS232 Data Cable (NKN6544) facilitates quick and easy data synchronization between your i80s phone and a laptop or desktop computer. This cable accommodates both circuit and packet data applications. It supports the same applications as the USB cable (see “Universal Serial Bus (USB)” on page 164). The cable also features a charging port. Any applicable iDEN phone charger may be used to charge the phone simultaneously.
Dual Port Adapter Cable The Dual Port Adapter Cable (NKN6540) enables in-vehicle communications and charging of the i80s phone via the Hands-Free Car kit, while being simultaneously connected for data operations. CAR KIT DATA Using the Dual Port Adapter Cable 1 Insert the flat end of the Dual Port Adapter Cable cord into the bottom connector of the i80s phone. Make sure the Motorola logo is facing upward.
Data Accessories PDA Converter Plugs The PDA (Pocket Digital Assistant) plug is a convenient way to connect your i80s phone to many types of PDA devices, both PC and Windows CE compatible.
3 Connect other end of PDA converter to the mating connector of the PDA device. 4 If you are using the NTN8993 PDA adapter, connect the other end of the adapter to the PDA’s supplied data synchronization cradle and place the PDA into the cradle. NOTE: Please see the label on the bottom of your Dual-Pocket Desktop Charger for more information regarding battery charging status. Universal Serial Bus (USB) Your user will be able communicate with USB capable laptop and desktop computers.
Data Accessories PC Applications Supported • • • • • • RSS (Radio Srvice Software) Tethered Circuit Data iDEN CompanionPro SDK (Windows only, Palm SDK not supported) iDEN Update ~ after first upgrade iDEN Packet Data Applet 165
www.motorola.
Other Important Information This section includes the following topics: Understanding Status Messages Page 167 Safety and General Information Page 169 Additional Health and Safety Page 179 Limited Warranty Information Page 185 Patent and Trademark Information Page 193 Understanding Status Messages The following table lists and describes the status messages. Status Messages Message Description Number Not in Service The number that you entered is not valid.
Status Messages Message Description Service Not Available This feature is not available on the current network. System Busy Try Later The system is experiencing heavy traffic. Please try again later. Service Conflict This service cannot be enabled because an incompatible service has already been turned on. Please Try Again An error occurred. Please try again. Self Check Error A fault was detected with your phone. If this error recurs, note the error code and contact Customer Care.
RF Operational Characteristics Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO.
Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. Two-way radio operation When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.
PORTABLE RADIO PRODUCT OPERATION AND EME EXPOSURE Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, visit our website at www.mot.com/iden, or look in the accessory section of this manual. THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver.
Electro Magnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.
Medical Devices Use While Driving Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using the radio product while driving, please: • • • Give full attention to driving and to the road. Use hands-free operation, if available. Pull off the road and park before making or answering a call if driving conditions so require.
! Operational Warnings WARNING For Vehicles with an Air Bag Do not place a portable radio product in the area over the air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle.
Operational Cautions ! Operational Cautions Caution Antennas Do not use any portable radio product that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot.
5. Let the radio product, battery dry, and SIM card for 72 hours before reconnecting the battery and/or powering on the radio product. If the radio product does not work after following the steps listed above, contact your dealer for servicing information. Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product.
Accessory Safety Information Accessory Safety Information IMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery. • Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.
• • • • • • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40°C (104°F).
Accessory Safety Information The U.S. Food and Drug Administration's Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known-and what remains unknown--about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.
How much evidence is there that hand-held mobile phones might be harmful? Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results.
Accessory Safety Information repeatability of these results.(1) 2. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes.
occurred in only a small number of cases, the increased likelihood was too small to be statistically significant.(4) In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones.
Accessory Safety Information • • • • • • • • • support needed research into possible biological effects of RF of the type emitted by mobile phones; design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health.
Again, the scientific data do not demonstrate that mobile phones are harmful. But if people are concerned about the radiofrequency energy from these products, taking the simple precautions outlined above can reduce any possible risk. Where can I find additional information? For additional information, see the following websites: • • • • • Federal Communications Commission (FCC) RF Safety Program (select "Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters"): http://www.
Limited Warranty Motorola Communication Products Limited Warranty Motorola Communication Products NOTE: This Warranty applies within the fifty (50) united states and the District of Columbia I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: MOTOROLA, INC.
to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.
Limited Warranty Motorola Communication Products IV. HOW TO GET WARRANTY SERVICE: You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.
VI. PATENT AND SOFTWARE PROVISIONS: MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: a.
Limited Warranty Motorola Communication Products (International) Limited Warranty Motorola Communication Products (International) NOTE: This Warranty applies in Singapore and the Philippines. I.
to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.
Limited Warranty Motorola Communication Products (International) b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e.
that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.
Patent and Trademark Information Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2002 Motorola, Inc. All rights reserved. Manufactured under one or more of the U.S. patents listed in the User’s Guide. Microsoft and, Microsoft WEB Explorer, are registered trademarks of Microsoft Corporation. Netscape Navigator is a registered trademark of Netscape Communications Corporation.
www.motorola.
Index A Accessories 155 batteries 156 Data cable 84, 161, 162 Dual Port Adapter Cable 162 Swivel Carry Clip 158 Travel Charger 157 Accessory safety information 177 Adapter cable 162 Additional Health and Safety 179 Alpha mode, text entry 30 Auto Redial 139 B Backlight timer 140 Battery 156 attaching 13 charge strength 14 charging 14 detaching 13 operating 156 Baud rate 141 C Call Alert Queue 101 Call alerts 99 from Phonebook 100 receiving 101 Call Filtering 148 Call Forwarding 72 turning off 74 turning on
K Driving safety 8 E Keypad Lock 135 email 84 sending and receiving 83 Entering text, see Text entry L Language 32, 141 M F Faxes sending and receiving 84 G Getting started 11 Group calls 104 receiving 105 I Icons context sensitive 36 Datebook 108 main menu 40 mobile originated text messaging 87 Phonebook 45 status 36 In Call Setup 134 Inbox 88 Initial Setup 137 Initial SIM PIN number 18 International calls 55, 62 IP Address 28 J Java applications 125 deinstalling 128 downloading 127 installing 12
voice mail 80 Messages, Net Alert receiving 83 Messages, text and numeric viewing 82 Missed call 64 Mobile originated text messaging 85 creating messages 91 drafts folder 94 icons 87 inbox 88 memory 95 outbox 90, 93 Quick Notes 89 reading messages 89 receiving messages 88 sending messages 93 set up 87 SIM card 95 Modem, phone as 84 Motorola 7 Mute 68 My Information 27 N Net Alert 83 Notifications 134 setting 132 Numeric mode, text entry 33 O OARSS, see over-the-air programming Outbox 90, 93 over-the-air p
Plus dialing 55 Private and Group Calls 97 Private calls from Phonebook 98 from Recent Calls list 98 making 97 receiving 99 voice names 98 Private ID 97 PUK code 20 Q Quick Notes 89 R Radio frequency 169 Ready screen 35 Recent Calls 60, 63 deleting 65 details 64 Private calls 98 storing to Phonebook 65 viewing 63 Recent Calls list storing numbers from 52 Ring styles 132 Ring/Vibe 130 S Safety 169 accessory 177 electromagnetic interference 172 medical devices 172 radio frequency 169 Scrolling 141 Security
also see Text entry Talkgroups 104 joining 105 Text and numeric messages 81 Text display area 38 Text entry Alpha mode 30 Numeric mode 33 Symbols mode 33 Word mode 30 Three-Way Calling 71 Time and date format 138 Trademark information 193 Travel Charger 157 TTY devices 84 making calls 61 setting baud rate 143 setting mode 142 Turbo Dial 61 Two-way radio, see Private and Group Calls Typing text, see Text entry Phonebook 51 shortcuts 151, 152 Voice Record 66, 119 adding 121 deleting 122 labeling 121 locking
www.motorola.