User manual

Advanced Configuration

igure 4-2: Local Address Menu

DHCP Server Tab

The DHCP Server tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on

the LAN, allowing the router to dynamically assign lease IP addresses to clients that connect to it

from the local network.

Table 4-3 DHCP Server Tab

Field or Button Description

Enable DHCP Server If selected, the DHCP server on the gateway assigns IP addresses

to the computers and other hosts on your network if they have

DHCP enabled. By default, the gateway server is enabled. If there

is another DHCP server running on your network (on another

router), disable one of the DHCP servers.

DHCP Server IP Address Enter the default port forwarding LAN Client IP Address.

DHCP Starting IP Address Sets the first IP address assigned by the DHCP server, in dotted-

decimal format. It must be greater than the IP address value of the

gateway. For example, if the IP address of the gateway is

192.168.15.1(default), the starting IP address must be

192.168.15.2 (or higher).

(Continue)

UG 2011

4-3