user manual

Chapter 3 MOTLoad Firmware
MVME3100 Single-Board Computer Installation and Use (V3100A/IH1)
19
■ The argument/option identifier character is always preceded by a hyphen (-) character
■ Options are identified by a single character
■ Option arguments immediately follow (no spaces) the option
■ All commands, command options, and device tree strings are case sensitive
Example:
MVME3100> flashProgram –d/dev/flash0 –n00100000
For more information on MOTLoad operation and function, refer to the MOTLoad Firmware
Package User’s Manual.
MOTLoad Command List
The following table provides a list of all current MOTLoad commands. Products supported by
MOTLoad may or may not employ the full command set. Typing help at the MOTLoad command
prompt will display all commands supported by MOTLoad for a given product.
Table 3-1. MOTLoad Commands
Command Description
as One-Line Instruction Assembler
bcb bch bcw Block Compare Byte/Halfword/Word
bdTempShow Display Current Board Temperature
bfb bfh bfw Block Fill Byte/Halfword/Word
blkCp Block Copy
blkFmt Block Format
blkRd Block Read
blkShow Block Show Device Configuration Data
blkVe Block Verify
blkWr Block Write
bmb bmh bmw Block Move Byte/Halfword/Word
br Assign/Delete/Display User-Program Break-Points
bsb bsh bsw Block Search Byte/Halfword/Word
bvb bvh bvw Block Verify Byte/Halfword/Word
cdDir ISO9660 File System Directory Listing
cdGet ISO9660 File System File Load
clear Clear the Specified Status/History Table(s)
cm Turns on Concurrent Mode
csb csh csw Calculates a Checksum Specified by Command-line Options
devShow Display (Show) Device/Node Table
diskBoot Disk Boot (Direct-Access Mass-Storage Device)