Operation Manual

45
Using additional handsets
On the base:
1. Pressandhold untilthebaseemitsadoublebeep.Thebasewill
remaininregistrationmodefor90seconds.
On the handset:
Followtheregistrationinstructionsgiveninyourhandset’suserguide.
10.3 Select a base
YoucanregistertheC5010Ahandsetwithupto4bases.Onceregistered,
youcanswitchbetweenbases,forexample,basesathomeandatwork.
1. Press Menu ,scroll to Registration andpress Select .
2.
Scroll to Select Base andpress Select .
Allthebasenumbersaredisplayed.
(In use) isshownbesidethebasenumberwherethehandsetwas
previouslyregisteredto.Scroll or tothebaseyouwantandpress
Select .
3.
Thedisplayshows Searching Base X .Whenregistrationiscomplete,the
handsetreturnstostandby.
10.4 De-register a handset
Useonehandsettode-registeranother.Youcannotde-registerthehandset
thatyouareusing.
1. Press Menu ,scroll to Registration andpress Select .
2.
Scroll to De-register andpress Select .
3.
EntertheSystemPINandpress OK .(defaultsetting=0000)
4. Scroll or tothehandsetyouwanttode-registerandpress Select .
5.
Press Yes toconrmor No tocancel.
6. Press toreturntostandby.