™ Bluetooth Wireless Hands Free Car Kit User's Guide > art#020829-O.
Welcome Welcome to Motorola’s “connected” world of Bluetooth™ personal area wireless networking. The Motorola Bluetooth Wireless Hands Free Car Kit makes wireless connection simple and quick.
Personal Communications Sector 600 North U.S. Highway 45 Libertyville, Illinois 60048 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States) 1-800-461-4575 (Canada) www.motorola.com (United States) www.motorola.ca (Canada) MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety and General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the Hands Free Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Guidelines for Installation and Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC rules and with RSS-210 / RSS-139 of the Industry Canada.
Installing the Hands Free Kit Guidelines for Installation and Connection • Only qualified personnel should install this car kit. If necessary, contact with vehicle manufacturer for air bag information specific to the vehicle. • Mount components securely on strong surfaces to prevent shifting that could cause injury or interfere with safe vehicle operation. Always use the supplied mounting hardware • Mounted components and attached wires or cables must not interfere with seating or leg space.
The location MUST NOT interfere with the vehicle’s air bag deployment. Installing the Power Cable and Fuse Kit Caution: Failure to follow these steps may cause the accessory not to work properly and may cause damage to the car kit.
1 Attach one of the three supplied mounting clips to the microphone. 2 Select a suitable location, and mount the microphone. • Aim the microphone directly toward the driver. • Do not allow anything (such as a rear-view mirror or sun visor) to block the path between the microphone and the driver. • Mount the microphone firmly so that vibrations do not affect audio quality. 3 Connect the microphone to the Bluetooth Junction Box.
Using Your Car Kit The Control Module The control module enables you to set up and use the Bluetooth Hands Free Car Kit. Bluetooth Button Voice Recognition Button Volume-Up Button C Using Your Car Kit B Volume-Down Button Microphone Mute Button Linking Your Car Kit and Phone Before you can use this car kit, you must link it with your phone. You establish a Bluetooth link between your car kit and phone with a paired link. When you set up a paired link, the car kit remembers the phone’s ID.
Step 2 If your phone has a Bluetooth Hands Free Profile, press and hold the Bluetooth Button E.* Result The Bluetooth Button E and the Voice Recognition Button begin to flash (often 3 seconds). or If your phone has only a Bluetooth Headset Profile, press and hold both the Bluetooth Button E and the Voice Recognition Button.* The Bluetooth Button E and the Mute Button begin to flash. You now have two minutes to create a wireless connection between the car kit and your phone.
If the Bluetooth link cannot be established, or if you are not able to make a call, then pair your phone and the car kit according to the procedure for Bluetooth headset profile. This car kit can be paired with up to three phones at a time. Automatic Connection After initial pairing, every time you start your vehicle, your phone and car kit will automatically be connected (if your phone’s relevant settings are not changed and it is in power-on mode).
Training the Car Kit To train the car kit’s Voice Recognition, follow these steps: 1 Make sure your phone’s keypad tones are set to normal tones. (Refer to the user’s guide for your phone for information about using your phone’s Settings menu to define keypad tones.) If the Bluetooth Button E is not lit, press it to establish a Bluetooth link. 2 Press and hold the Voice Recognition Button until it begins to flash. 3 Train the car kit by using the commands described in “Training Commands” below.
• When recording, say the key word in a louder tone of voice. H # 8 # Record Name Used to record and store names and their associated phone numbers in the Voice Recognition Phone Book. During normal recording, you are required to say the name twice. If the Voice Recognition has difficulty matching the first to the second pronunciation, it may require you to say the name yet again. When entering a phone number, press C to delete the last digit or press and hold C to cancel the recording.
• dial a number from the phone • use voice activation See “Making a Call with the Car Kit’s Internal Voice Recognition” on page 13. In both cases, you must first link your car kit and phone as described in “Linking Your Car Kit and Phone” on page 8. When connected, the call is hands free. Making a Call with the Car Kit’s Internal Voice Recognition Before you can use your car kit’s Voice Recognition, you must: • Record voice names for phone book entries on your car kit—See “H # 8 # Record Name” on page 12.
Note: Some phones require you to press the Bluetooth Button E twice. See the user’s guide for your phone for more information. Receiving a Call To answer an incoming call, do one of the following: • Press and release (in less than three seconds) the Bluetooth Button E. or Press your phone’s press the OK/Send/Yes key (depending on your phone), just as you would to answer a call in privacy mode. or • Use voice activation. See “Making a Call with the Car Kit’s Internal Voice Recognition” on page 13.
Volume Buttons Press the volume buttons (C and B) on the car kit to increase and decrease the volume. If you press and hold a volume button, the volume is automatically increased or decreased to the highest or lowest step. You can also adjust the volume remotely by pressing the phone’s volume buttons, if your phone supports this feature.
Troubleshooting Troubleshooting 16 You cannot pair your phone with the car kit. Turn the phone off and then back on. (You may need to remove the phone’s battery.) Try pairing the phone and car kit again. You make a call and the other party hears too much background noise. Check the location and placement of your car kit’s microphone. (See “Installing the Hands Free Kit” on page 5 for details.) Nothing happens when you enter a training command.
Training Quick Reference 1 2 3 4 Set phone keypad tones to normal tones. (Refer to phone user’s guide for information about defining keypad tones.) If Bluetooth Button E does not flash, press it to establish a Bluetooth link. Press, hold Voice Recognition Button until it flashes. Train car kit by using commands described below. Exit Training Mode: Press, release Voice Recognition Button.
AGC Mode On/Off H #4# F On H #4# F Off Delete List H #9# F Press 9 to delete all H 9 (all names and key word deleted) Car Kit Voice Recognition Mode On/Off H #0# F On H #0# F Off 18 Related Information Related Information F Aborting (if nothing said for 10 seconds) Related Information
Calling Features Quick Reference Make a Call H Voice Recognition Button F Say a name G John Smith (name of person to call) F Calling John Smith Answer a Call G key word F Answering or H OK/Send/Yes key (on phone keypad) or H Bluetooth Button E (press and release) Language Selection H #5# F English (default language) H # or * (to scroll to other languages) H any key except # or * (to choose Related Information F Aborting (if no name found or if nothing said within 10 seconds) Related Information To use
Motorola Limited Warranty for Accessories I. What This Warranty Covers and for How Long The Motorola company listed below (“Motorola”) warrants this accessory (the “Products”) against defects in materials and workmanship under normal use for a period of one year from the date of purchase. This warranty extends to the first end-user purchaser only and is not transferable. This warranty does not extend to other products, including batteries.
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. VI. Patent and Software Provisions Motorola will defend at its own expense, any suit brought against you to the extent that it is based on a claim that the Products infringe a United States patent.
Total Customer Satisfaction At Motorola, Total Customer Satisfaction is a top priority. If you have a question, a suggestion, or a concern about your Motorola Cellular Phone, Motorola wants to hear from you.
Motorola’s Warranty Your Cellular Phone is warranted by Motorola to be of satisfactory quality, fit for its purpose and comply with applicable Motorola specifications for a period of twelve (12) months from the date you bought it (verified by reference to your proof of purchase). This warranty does not apply if the phone has: 1. been mishandled, misused, willfully damaged, neglected, improperly tested, repaired, altered or defaced in any way. 2.
