USER’S GUIDE Model: BLINK1-R, BLINK1-S BLINK1-W, BLINK1-B Wi-Fi® Video Baby Monitor Camera The features described in this user’s guide are subject to modifications without prior notice. INK1_USA_V3_2013_04_18.
Welcome... to your new Motorola Baby Monitor Camera! Overview of your Camera 1 Thank you for purchasing the BLINK1 Wi-Fi Video Baby Monitor Camera. Now you can see and hear your baby sleep in its room or you can monitor your older children in their playroom. You can set up the camera only from your iPhone®/iPad® or devices for Android™ and view the camera video from your PC or Notebook, as well as devices for Android™ or iPhone®/iPad®.
1. Safety Instructions 1. Safety Instructions........................................................................... 5 2. System Requirements...................................................................... 7 3. Getting started - Connecting Devices............................................ 8 3.1 Setup........................................................................................... 8 3.2 User Account and Camera Setup: Working with devices for Android™....................................
Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This Wi-Fi Camera Unit is not a substitute for responsible adult supervision. • Keep this user’s guide for future reference. • Do not place the Wi-Fi® Camera Unit or cables in the crib or within reach of the baby (the unit should be at least 3 feet away). • Keep the cords out of reach of children.
How does it work? Access your camera locally View your camera from any device remotely • The Monitor Everywhere Server keeps track of the cameras. • When a user wants to access the camera, the server authenticates the user and permits the user access to the camera. 3.2 User Account and Camera Setup: Working with devices for Android™ ENGLISH created by: Pro. Q.C. Systems Design Limited 3.
Tap NEXT STEP. • Follow the on screen checklist to ensure that your camera is power connected and tap NEXT. • Select the camera from the list. ENGLISH created by: Pro. Q.C. Systems Design Limited • If you cannot find the camera ID on the list, please reset the camera with the following procedure: 1. Switch the ON/OFF switch to ON. 2. Press and hold the RESET button on the underside of the camera for 5 seconds, until you hear a beep sound. 3.
Once your camera is installed, you can rename it. • Tap DONE. • Tap START MONITOR to show the camera view. • Tap VIEW to show the camera view and the controls. 3.3 User Account and Camera Setup: Working with iPhone®/iPad® • Install the application “Monitor Everywhere” from the App StoreSM. Note: If you can’t find the application, then use your device browser to go to www.monitoreverywhere.com for advice on how to install.
ENGLISH created by: Pro. Q.C. Systems Design Limited S5 S3 • Tap Continue (picture S3). • Switch on the camera (see 5. Procedure for resetting the Camera) and follow the on-screen instructions. S6 • On your iPhone or iPad , under Settings select Wi-Fi, then select the camera from the network list and wait until it is connected (pictures S5, 6). • Run the “Monitor Everywhere’ app again.
ENGLISH created by: Pro. Q.C. Systems Design Limited • Tap Configure Camera to Wi-Fi (pictures S7,8). • • Enter ‘Wi-Fi’ password for camera (picture S9), then press Next. Press the iPhone® or iPad® HOME button and run the “Monitor Everywhere” application again. • Tap Create Account and enter a user name, a password and an e-mail address (pictures S12, 13). • On your iPhone® or iPad®, under Settings select Wi-Fi.
ENGLISH created by: Pro. Q.C. Systems Design Limited 4. Camera 4.1 Connecting the Camera to Power S15 • S16 Tap Camera Test (pictures S15, 16). S17 Insert the small end of the Power Adapter into the Power Adapter Connector and plug the Power Adapter into a suitable power socket. • Slide the ON/OFF switch to ON, the green Power LED will light up. (Note: To switch the device off, slide the ON/OFF switch to OFF.) 4.2 Camera Functions: Working with PC/Notebook • Go to URL: https://www.
+ B • + + + • • C + Temperature: Play Lullaby: • - - ! • C D 0/ + • 0 #/ + + • ENGLISH created by: Pro. Q.C. Systems Design Limited - + Tap the icon to show the Play Lullaby menu.
• Run the “Monitor Everywhere” application. • Enter the User Name and Password and then tap Login, if you have already created an Account (see 3.2 Getting Started/ Connecting Devices User Account and Camera Setup). • • Tap to change the camera name or remove a camera from the list. Tap the return button to return to the camera list. Select the camera and tap View to see the camera view. Tap the display to reveal the camera control icons.
4.5 Adding another Camera: Working with devices for Android™ Photo/Video: Take a photo or record a video. Tap the icon to start the camera function. Tap the photo icon to activate the camera function. ENGLISH created by: Pro. Q.C. Systems Design Limited • To add another camera, please follow the screen number sequence: Tap the video icon to activate the video function. Tap the red dot to start, and the square to stop recording.
• Select your camera (picture A3) and then select your preferred Wi-Fi® network (picture A4). A5 26 A4 • Please be patient, it may take a few minutes until your camera is added to your account (picture A6). • Once the camera has been added, the camera view will be automatically displayed.
created by: Pro. Q.C. Systems Design Limited " 6 0/ " . #/ • •• - - + + - - • •• C D C D ! •• 0 •• + + + + - # B + - # B + 4.
Tap on ENGLISH created by: Pro. Q.C. Systems Design Limited 4.7 Adding another Camera: Working with iPhone®/iPad® Tap Cameras to return to the Camera list. to add another camera to the list. Follow the same steps as under 3.3 User Account and Camera Setup, Working with iPhone®/iPad®. • Tap on Edit: • Tap Remove to take a camera off the list. • Tap Rename to give a camera a new name.
Account Noise interference To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit. Use of other 2.4 GHz products, such as Bluetooth® systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi® Camera Unit at least 5ft away from these types of products, or turn them off if they appear to be causing interference. I receive an error message saying: “Email ID is not registered”.
When I am in “remote mode”, the video stops after 5 minutes. How do I view for longer? When you are accessing your camera via a network different from your home network (over internet) your video times out after 5 minutes. You can click on the Camera ™ again from the Android /iOS application to start streaming again. If you are accessing from your web-browser, then you can press on the Reload button to start viewing your camera video stream again. Connectivity My Phone application 1.
Please check if the camera is within Wi-Fi range. If the LED on your camera is slow blinking, please try to move the camera closer to the router for better WiFi range and try again. Setting Up Please reset the camera to setup mode and try again. Press and hold the RESET button on the bottom of the camera untill you hear a long beep. Wait for a minute for the camera to restart. The camera LED is blinking fast, indicating that it is in setup mode. Now restart the setup from your Smartphone again.
What does the message “PAN TILT disabled because of network speed” mean ? When your network speed is low, the PAN and TILT is disabled. You can see the message on the application screen when this occurs. General I am having problems to access my cameras from Internet Explorer. What should I do ? The following links take you to the troubleshooting guide for Internet Explorer related issues. General I am not able to access my cameras on Internet Explorer®.
How do I download the APP for Android and iOS devices ? Android: - Open Google Play APP on your Android device. - Select Search - Type “ Monitor Everywhere” - The results will have Monitor Everywhere APP by Binatone - select to install it iOS Device: - Open iOS APP Store - Select search - Type “ Monitor Everywhere” - The results will have Monitor Everywhere APP by Binatone - select to install it Features I am having problems with PAN/TILT.
What will BINATONE do? If your product is not working properly.... 1. Read this User’s Guide. 2. Contact Customer Service at: US and Canada 1-888-331-3383 Consumer Products and Accessories Limited Warranty (“Warranty”) Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD (“BINATONE”).
Products covered Consumer Products Consumer Accessories Consumer Products and Accessories that are repaired or replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer.
FCC and IC regulations To obtain service or information, please call: FCC Part l5 US and Canada 1-888-331-3383 You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Mac, Mac OS, iPhone, iPad and Safari are the trademarks of Apple Inc., registered in the U.S. and other countries. Android, Google Play and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.
