Spec Sheet

SPECIFICATION SHEET
The AP650 is a thin (dependent) multipurpose
access point designed to lower the cost of
deploying and operating a secure, reliable
802.11n wireless LAN (WLAN) in branch offices
or headquarters facilities. The AP650 offers
simultaneous WLAN access and sensing enabling
remote over-the-air helpdesk support, or Wireless
intrusion prevention.
Fast and Easy Deployment
The AP650 derives its intelligence from an RFS
switch/controller, so installation is plug-and play-for
optimal service in new wireless WLANs.
Automatic Channel and Power Optimization
Common problems such as building attenuation,
electronic interference or sub-optimal access point
placement are minimalized as the SMART RF feature
of the switch/controller automatically optimizes
power and channel selection so each user gets
always-on high-quality access and mobility.
On-the-fly Remote Helpdesk
The AP650’s multipurpose architecture allows IT
to extend immediate helpdesk support -- as if the
technician was sitting directly under the access
point. Motorola helpdesk solutions supported by
the AP650 includes:
AirDefense Advanced Troubleshooting allows any
helpdesk technician to immediately emulate and
test a user’s connectivity over-the-air from device
all the way to the back-end application and isolate
the obstruction, even if it is not caused by
the WLAN.
FEATURES
Full 802.11n performance
with standard 802.3af
Simplifies and reduces total cost
of installation using standard
Power-over-Ethernet (PoE)
Multiband Operation
Allows concurrent sensing on
2.4 Ghz and 5.0 Ghz frequency
bands for multi-band intrusion
protection or troubleshooting
2x3 MIMO radio
High throughput MIMO
technology with extended
range capabilities
Mobility
Supports fast secure
roaming
Security
This unique multi-purpose
device can execute and
enforce the IDS/IPS security
policies configured in the
Motorola wireless switch,
and can also be utilized as a
24x7 dedicated sensor with
Wireless IPS from
Air Defense
Spectrum Analysis allows the helpdesk technician
to analyze the local spectrum for interference.
AirDefense Vulnerability Analysis allows the
helpdesk to remotely scan for security breaches
on the wired or wireless network on a scheduled
or periodic basis to assure network security and
regulatory compliance.
Gap-free Security
Security includes layer 2-7 stateful packet filtering
firewall, AAA RADIUS services, Wireless IPS-lite,
VPN gateway, and location-based access control.
Users can also add role-based access control and
AirDefense Wireless IPS and Rogue detection for
premium-level security vigilance. Because the sensor
supports simultaneous multi-band sensing (band un-
locked) for both 2.4 MHz and 5.0 MHz spectrums, the
Wireless IPS and rogue detection is always-on with
no timeslicing.
High Reliability
The AP650 is designed to optimize network availability
through its central and pre-emptive intelligence which
dynamically senses weak or failing signals, securely
moves mobile users to alternate APs, and boosts
signal power to automatically fill RF holes and ensure
uninterrupted mobile user access.
Full Performance using Standard POE
The AP650 is designed to provide full 802.11n
performance using standard and lower cost POE (af).
AP650
802.11n WLAN Access Point