Two-Way Radios User Guide RMU2080d Display model
Open Source Software Legal Notices: This Motorola product contains Open Source Software. For information regarding licenses, acknowledgements, required copyright notices and other usage terms, refer to the documentation for this Motorola product at: http://businessonline.motorolasolutions.com Go to: Resource Center > Product Information > Manual > Accessories.
CONTENTS 1 15 15 16 17 17 18 18 19 20 21 23 24 26 28 28 28 28 29 29 29 CONTENTS Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Product Safety . . . . . . . . . . . . . . . . . . . . . . . .4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .5 Package Contents . . . . . . . . . . . . . . . . . . . . . .5 FCC Licensing Information . . . . . . . . . . . . .7 Interference Information . . . . . . . . . . . . . . . . .7 Batteries and Chargers Safety Information. . . . . . . .
CONTENTS English Signal Strength Indicator and Channel Busy Indicators . . . . . . . . . . .30 Talk Range . . . . . . . . . . . . . . . . . . . . . . . . . .30 Radio LED Indicators . . . . . . . . . . . . . . . . . .32 Hands-Free Use/VOX . . . . . . . . . . . . . . . . . .33 With Compatible VOX Accessories. . . . .33 Hands Free without Accessories (iVOX) . . . . . . . . . . . . . . . . . . . . . . . . .34 Toggle Voice Prompt in User Mode . . . .34 Power Up - Tone Mode. . . . . . . . . . . . . .
Carry Accessories . . . . . . . . . . . . . . . . . . . . Software Applications. . . . . . . . . . . . . . . . . . RM Series™ Features Summary. . . . . . . . New Features . . . . . . . . . . . . . . . . . . . . . . . Programmable Buttons Chart . . . . . . . . . . Icons Chart . . . . . . . . . . . . . . . . . . . . . . . . . 77 77 79 88 90 91 CONTENTS Cloning with a Multi Unit Charger (MUC) . . . . . . . . . . . . . . . . . .51 CPS and Cloning Cables (Optional Accessory). . . . . . . . . . . . . .
PRODUCT SAFETY PRODUCT SAFETY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE ! Caution Before using this product, read the operating instructions and RF energy awareness information contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements.
INTRODUCTION Business Radios, Mailstop 1C15, Motorola Thank you for purchasing the Motorola® RM Series™ Radio. This radio is a product of Motorola's 80 plus years of experience as a world leader in the designing and manufacturing of communications equipment. The RM Series™ radios provide cost-effective communications for businesses such as retail stores, restaurants, schools, construction sites, manufacturing, property and hotel management and more.
INTRODUCTION For a copy of a large-print version of this user guide or for product-related questions, contact English 1-800-448-6686 in the USA 1-800-461-4575 in Canada 1-888-390-6456 on TTY (Text Telephone) For product related information, visit us at: www.motorolasolutions.
To transmit on these frequencies, you are FCC LICENSING INFORMATION required to have a license issued by the FCC. Application is made available on FCC Form This device complies with Part 15 of the FCC 601 and Schedules D, H, and Remittance Form 159. Rules. Operation is subject to the condition that To obtain these FCC forms, request document this device does not cause harmful 000601 which includes all forms and interference. instructions.
FCC LICENSING INFORMATION Before filling out your application, you must Replacement of any transmitter component decide which frequency(ies) you can operate (crystal, semiconductor, etc.) not authorized by on. See “Frequencies and Code Charts”. For the FCC equipment authorization for this radio questions on determining the radio frequency, could violate FCC rules.
3. and cord, pull by the plug rather than the cord when disconnecting the charger. 4. extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18AWG Before using the battery charger, read all the instructions and cautionary markings on the charger, • the battery, and • the radio using the battery 1. To reduce risk of injury, charge only the for lengths up to 100 feet (30.48 m), and 16AWG for lengths up to 150 feet (45.72 m).
BATTERIES AND CHARGERS SAFETY INFORMATION OPERATIONAL SAFETY GUIDELINES • Turn the radio OFF when charging battery. • The charger is not suitable for outdoor use. Use only in dry locations/conditions. • Connect charger only to an appropriately fused and wired supply of the correct voltage (as specified on the product). • Disconnect charger from line voltage by removing main plug.
RADIO OVERVIEW PARTS OF THE RADIO Antenna Audio Accessory 2 Pin Connector PTT (Push-ToTalk) Button Battery Model Label RMU2080d On/Off/Volume Knob Microphone LED Indicator SB1 - Monitor Button SB2 - Scan/ Nuisance Channel Delete Left Navigation Arrow/Programmable Button A RADIO OVERVIEW Channel Selector Knob Display Menu Right Navigation Arrow/Programmable Button B 11 English
On/Off/Volume Knob Front Buttons RADIO OVERVIEW Used to turn the radio ON or OFF and to adjust the radio’s volume. Channel Selector Knob Used to switch the radio to different channels. Accessory Connector Used to connect compatible audio accessories. Model Label Indicates the model of the radio. Microphone Speak clearly into the microphone when sending a message. Antenna For model RMU2080d, the antenna is non-removable.
Side Buttons • Programmable Button Note: A short press of either Programmable Button (A or B) tunes the radio to the preset channel and the radio will play a good chirp. You can assign different functions to these buttons via the CPS. For example: Backlight Time Out, Reverse Burst, Scan/Nuisance Channel Delete, Monitor and Call Tones.
RADIO OVERVIEW English This User Guide covers the RMU2080d model from the RM Series radios.
BATTERY FEATURES RM Series radios provide Lithium-Ion batteries that come in different capacities that defines the battery life. The RM Series radio comes equipped with a rechargeable Li-Ion battery. This battery should be fully charged before initial use to ensure optimum capacity and performance. Battery life is determined by several factors. Among the more critical are the regular overcharge of batteries and the average depth of discharge with each cycle.
RADIO OVERVIEW Battery Recycling and Disposal English Li-Ion rechargeable batteries can be recycled. However, recycling facilities may not be available in all areas. Under various U.S. state laws and the laws of several other countries, batteries must be recycled and cannot be disposed of in landfills or incinerators. Contact your local waste management agency for specific requirements and information in your area. Motorola fully endorses and encourages the recycling of Li-Ion batteries. In the U.S.
Installing the Lithium-Ion (Li-Ion) Battery Removing the Lithium-Ion (Li-Ion) Battery Detach Press Latch Attach Press until click RADIO OVERVIEW Tabs Slots 1. Turn OFF the radio. 1. Turn OFF the radio. 2. With the Motorola logo side up on the battery 2. Push down the battery latch and hold it while pack, fit the tabs at the bottom of the battery into the slots at the bottom of the radio’s body. 3. removing the battery. 3. Pull the battery away from the radio.
RADIO OVERVIEW Holster Drop-in Tray Charger 1. Insert the radio into the base of the holster at an angle. Press the radio against the back of the holster until the hooks on the holster are inserted in the top recesses of the battery. 2. To remove, using the top tab on the holster, detach the hooks of the holster from the top recesses of the battery. Slide the radio at an angle and remove from the holster.
Battery Life Information When the Battery Save feature is set to ON (enabled by default), the battery life lasts longer. The following table summarizes battery life estimations: Note: Battery Type Battery Save OFF Battery Save ON Standard 12 Hours 15 Hours High Capacity N/A N/A Battery life is estimated based on 5% transmit / 5% receive / 90% standby standard duty cycle.
Battery Meter RADIO OVERVIEW The battery meter located in the upper left corner of the radio display indicates how much battery power the radio has remaining.
Charging the Battery The RM Series radio offers two types of Power Supplies: Standard Power Supply and, • Rapid Power Supply Note: Drop-in Tray SUC Port Power Supply (Transformer) RADIO OVERVIEW • Charging with the Drop-in Tray Single Unit Charger (SUC) The radio comes with a Standard Power Supply. To charge the battery (with the radio attached), place it in a Motorola-approved Drop-in Tray Single Unit Charger or Drop-in Tray Multi Unit Charger. Drop-in Tray SUC 1.
RADIO OVERVIEW Note: When charging a battery attached to the radio, turn the radio OFF to ensure a full charge. See “Operational Safety Guidelines” on page 10 for more information. Charging A Stand-Alone Battery Table 4: Motorola Authorized Batteries Part Number To charge only the battery - at step 4 on page 21, insert the battery into the tray, with the inside surface of the battery facing the front of the Drop-in Tray Single Unit Charger as shown English above.
Drop-in Tray Charger LED Indicators Table 5: Charger LED Indicator Status LED Indicator Green for approximately 1 second Charging Steady Red Charging Complete Steady Green Battery Fault (*) Red Fast Flash Waiting to Charge (**) Amber Slow Flash Battery Level Status N/A Battery empty Flash Red 1 Time Battery low Flash Amber 2 Times Battery medium Flash Green 3 Times Battery High RADIO OVERVIEW Power On Comments (*) Normally, re-positioning the battery pack will correct this issue.
If there is NO LED indication: 1. Check if the radio with battery, or the battery alone, is inserted correctly. (refer to step 4 of "Charging with the 2. Ensure that the power supply cable is securely plugged into the charger socket using an appropriate AC 3. Confirm that the battery being used with the radio is listed in Table 4. RADIO OVERVIEW Drop-in Tray Single Unit Charger (SUC)" on page 21) outlet and there is power to the outlet.
Charging a Radio and Battery using a Multi Unit-Charger - MUC (Optional Accessory) 1. Place the Multi-Unit Charger on a flat surface. 2. Insert the power cord plug into the MUC’s dual 3. Plug the power cord into an AC outlet. 4. Turn the radio OFF. 5. Insert the radio or battery into the charging pin connector at the bottom of the MUC. RADIO OVERVIEW pocket with the radio or battery facing away from the contacts.
Multi-Unit Charger LED Indicators RADIO OVERVIEW Table 7: Charger LED Indicator Status LED Indicator Power On Green for approximately 1 second Charging Steady Red Charging Complete Steady Green Battery Fault (*) Red Fast Flash Waiting to Charge (**) Amber Slow Flash Battery Level Status Comments N/A Battery empty Flash Red 1 Time Battery low Flash Amber 2 Times Battery medium Flash Green 3 Times Battery High (*) Normally, re-positioning the battery pack will correct this issue.
If there is NO LED indication: 1. Check if the radio with battery or the battery alone, is inserted correctly (refer to step 5 of "Charging a Radio and Battery using a Multi RADIO OVERVIEW Unit-Charger - MUC (Optional Accessory)" on page 25). 2. Make sure the power cord is securely plugged into the MUC and the appropriate AC outlet. Make sure there is power to the AC outlet. 3. Confirm that the battery being used with the radio is listed in Table 4.
GETTING STARTED GETTING STARTED For the following explanations, refer to “Parts Of The Radio” on page 11. • Power up tone and channel number Do not hold the radio too close to the ear when the volume is high or when adjusting the volume READING THE DISPLAY Keypad Lock TURNING RADIO ON/OFF To turn ON the radio, rotate the On/Off/Volume Knob clockwise.
SELECTING A CHANNEL Notes: To select a channel, turn the Channel Selector Knob until you reach the desired channel. An audible voice indicates the selected channel. • To listen to all activity on a current channel, short press the SB1 to set the CTCSS/DPL code to 0. (Squelch set to SILENT)’. Each channel has its own Frequency, Interference Eliminator Code and Scan Settings.
GETTING STARTED Signal Strength Indicator and Channel Busy Indicators When there is activity on a frequency, the radio displays the Signal Strength Indicator icon and the radio LED blinks faster. When your radio is receiving (Rx) and there is activity on the same frequency and code as your radio, the radio Signal Strength Indicator icon can change from 1 (weakest) to 6 (strongest) depending on the radio reception coverage. This helps you to determine if your radio is moving out of range.
1. Channel: Current channel that the radio is using, depending on radio model. 2. Frequency: The frequency the radio uses to 3. Interference Eliminator Code: These codes transmit/receive. 4. Scramble Code: Codes that make the transmissions sound garbled to anyone listening who is not set to that specific code. 5. Bandwidth: Some frequencies have selectable channel spacing, which must match other radios for optimum audio quality.
RADIO LED INDICATORS GETTING STARTED RADIO STATUS English LED INDICATION Channel Busy Solid Orange Cloning Mode Double Orange Heartbeats Cloning In Progress Solid Orange Fatal Error at Power up One Green Blink, One Orange Blink, One Green Blink, then repeat for 4 seconds Low Battery Orange Heartbeat Low Battery Shutdown Fast Orange Heartbeat Monitor LED is OFF Power-Up Solid Red for 2 seconds ‘Idle’ Programming Mode / Channel Mode Green Heartbeat Scan Mode Fast Red Heartbeat Transmi
HANDS-FREE USE/VOX 2. Open accessory cover. 3. Insert the audio accessory’s plug firmly into 4. Turn radio ON. The LED Indicator will blink 5. Lower radio volume BEFORE placing 6. To transmit, speak into accessory microphone 7. VOX can be temporarily disabled by pressing accessory port. accessory near ear. VOX Accessory Accessory Port/ Connector Motorola RM Series radios can operate hands-free (VOX) when used with compatible VOX accessories.
Hands Free without Accessories (iVOX) GETTING STARTED • Press the PTT button while turning ON the radio to enable iVOX. The icon • blinks. iVOX can be temporarily disabled by pressing the • Power up tone and channel number announcement, or • Battery level and channel number announcements, or • Silent (Audible tones disabled) PTT button. • A short press of the PTT Button re-enables iVOX.
MENU OPTIONS You can lock the keypad to avoid accidentally changing your radio settings. To lock the radio keypad, press and hold the (Menu) button for 4 seconds. To access the radio MENU, short press the (Menu) button. The radio displays the feature options. For each options, use the and buttons to navigate. After selecting your desired option settings, you can: Note: The PTT Button and Programmable Button A (if Call Tone feature has been assigned) cannot be locked using this feature.
GETTING STARTED Accessories (iVOX)” on page 34 for more information). Once VOX/iVOX is enabled, short press the (Menu) button. If iVOX is enabled when you press the (Menu) button, the radio displays the following: 1 = Low sensitivity • 2 = Medium sensitivity • 3 = High sensitivity Once you have selected the desired sensitivity level, you can: • press the (Menu) button to go to the next step, or • turn OFF the radio to exit without saving changes.
ADVANCED CONFIGURATION MODE Advanced Configuration mode is a special radio mode that allows you to program basic radio’s features by using the radio’s front panel programming. When the radio is set to Advanced Configuration Mode, the icon displays and the current channel aliasing name blinks to indicate that you can rotate the Channel Selector Knob to select the channel you want to program.
PROGRAMMING FEATURES • To move along the different Programming Selection Mode without saving changes, short press the PTT Button or • (Menu) Button. To save changes, long press the PTT Button. The The radio display shows the frequency code as follows: radio returns to ‘Idle’ Programming Mode. • When in ‘Idle’ Programming Mode, long press the PTT button to exit the Programming Mode.
To program the desired code, use the and buttons until you get the CTCSS/DPL code value you want to set up. Long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving. Once you have entered Advanced Configuration Mode and selected the channel in which you want to enable Scramble ( ), scroll up or down through the programming modes by short pressing the PTT button or (Menu) button until the radio reaches the Scramble Programming Mode.
PROGRAMMING FEATURES the CPS. Scramble is disabled when the value is set to ‘0’. PROGRAMMING MAXIMUM NUMBER OF CHANNELS You can configure the maximum number of channels for the radio. Once you have entered the Advanced Configuration Mode, scroll up or down through the programming modes by short pressing the PTT button or (Menu) button until you reach the ‘Maximum Channel Programming Mode’.
The radio display shows the Programming Call Tone’ as follows: The radio display blinks the current call tone setting. You can select the desired call tone value (0,1,2 or 3) by pressing the and buttons. Each time you select a different value, your radio sounds the selected call tone (except for value ‘0’). Once you have selected the desired call tone, long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving.
PROGRAMMING FEATURES medium gain or 3 = high gain) by pressing the and buttons. Once you have selected the desired Microphone Gain Level, long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving. Note: The values available for Microphone Gain Level settings are dependent on the maximum Microphone Gain Level the radio supports.
OTHER PROGRAMMING FEATURES Scan Scan allows you to monitor other channels to detect conversations. When the radio detects a transmission, it stops scanning and goes to the active channel. This allows you to listen and talk to people in that channel without having to change channel manually. If there is talking going on Channel 2 during this time, the radio stays on Channel 1 and you will not hear Channel 2. After talking has stopped in Channel 1, the radio waits for 5 seconds before resuming scan again.
PROGRAMMING FEATURES Programming Scan List You can enable or disable the Channel Scanning feature for each channel in your radio. To do so, enter the Advanced Configuration Mode and select the channel you want to program. Scroll through the programming modes by short pressing the PTT button or (Menu) button until you reach the ‘Scan Programming Mode’.
press the PTT button or (Menu) button to start editing the channel alias name. Press the and disable the mode. • buttons to enable or Editing Channel Alias Name To edit a Channel Alias Name, turn ON the radio and press and hold the PTT button simultaneously with the button for 3 seconds. The radio generate a special beep upon entering the ‘Channel Alias Mode’. The radio display shows the current channel alias name and channel number blinking as follows: The character to be changed starts blinking.
PROGRAMMING FEATURES Nuisance Channel Delete Nuisance Channel Delete allows you to temporarily remove channels from the Scan List. This feature is useful when irrelevant conversations on a ‘nuisance’ channel ties up the radio’s scanning feature. CUSTOMER PROGRAMMING SOFTWARE (CPS) Radio to be programmed To delete a channel from the Scan List: • Start Scan mode by short pressing the SB2(*) button. • USB Ports Wait until the radio stops at the channel you wish CPS Programming Cable to eliminate.
CPS allows you to program frequencies, PL/ DPL Codes as well as other features such as: Bandwidth Select, Time-out Timer, Power Select, Scan List, Call Tones, Scramble, Reverse Burst, etc. CPS is a very useful tool as it can also lock the Front-Panel Radio Programming or restrict any specific radio feature to be changed (to avoid accidentally erasing the preset radio values). It also provides security by giving the option to set up a password for profile radio’s management.
PROGRAMMING FEATURES English Reverse Burst WEATHER CHANNEL Reverse Burst eliminates unwanted noise (squelch tail) during loss of carrier detection. You can select values of either 180 or 240 to be compatible with other radios. NOAA Weather Radio All Hazards (NWR) is a nationwide network of radio stations broadcasting continuous weather information directly from the nearest National Weather Service office.
Public Service Band Frequencies (MHz) 162.400 162.425 162.450 162.475 162.500 162.525 162.550 The channel position 8 on all RM Series radios with channel selector knob is configured at the factory as a NOAA Weather Radio. The NOAA Weather Radio feature can be disabled or configured to any of the other available channel positions via the Customer Programming Software (CPS) or in Advanced Configuration Mode.
PROGRAMMING FEATURES button to advance to channel menu or weather menu alert menu. NOAA Weather Alert The RM series radio is capable of monitoring the NOAA frequency for any alerts issued by the National Weather Service. When the Weather Alert feature is enabled. the radio will “mute” the daily weather radio. You can then move the channel position to a standard 2 way radio frequency and continue with normal communication.
CLONING RADIOS You can clone RM Series radio profiles from one Source radio to a Target radio by using any one of these 3 methods: • a Source radio (radio which profiles will be cloned • • a Target radio (the radio which profile will be Using a Multi Unit Charger (MUC- optional or copied from) and cloned from the source radio.
PROGRAMMING FEATURES simultaneously while turning the radio Notes: ON. • If cloning fails, refer to “What To Do If Cloning • Paired Target radios and Source radios must be • Wait for 3 seconds before releasing the buttons until the audible tone is heard. 3. Place the Source radio in the source pocket that of the same band type in order for the cloning to pairs with the target pocket you chose in step 1. run successfully. Press and release the SB1 button. 4.
• CPS Cable PROGRAMMING FEATURES CPS and Cloning Cables (Optional Accessory) Both CPS and Cloning Cables are made to work either with RM Series radios or RDX Series radios. Cloning cable supports a mix of RM and RDX series radios. • CPS cable programs RM series radios. Make sure the cable switch is in “Flash” position. To Cloning Cable program a RDX radio with the CPS cable, make sure the cable switch is in “CPS” position and the USB converter provided in the CPS cable kit is attached to the cable.
PROGRAMMING FEATURES Cloning Radio using the Radio to Radio (R2R) Cloning Cable (Optional Accessory) 2. cables) from the SUCs. 3. Plug one side of the cloning cable mini USB connector to the first SUC and the other end to the second SUC. Note: During the cloning process, no power is being applied to the SUC. The batteries will not be charged. Only data communication is being established between the two radios. 4. Turn ON the Target Radio and place it into one 5.
7. When the cloning is completed, the Source the radio. 4. Ensure that there is no debris in the charging 5. Ensure that the Target radio is turned ON. 6. Ensure that the Source radio is in cloning mode. 7. Ensure that the two radios are both from the “successful” (cloning is successful) or “fail” (cloning process has failed). If the Source Radio is a display model radio, it will either show ‘Pass’ or ‘Fail’ on the display (a voice announcement will be played within 5 seconds). 8.
PROGRAMMING FEATURES English Cloning using the Customer Programming Software (CPS) When cloning using this method, you need the CPS software, a Drop-In Tray Charger and the CPS Programming Cable. Radio to be programmed To order the CPS Programming Cable, please refer to P/N# HKKN4028_. Information on how to clone using the CPS is available either in: • the CPS Help File --> Content and Index --> Cloning Radios, or • in the CPS Programming Cable Accessory Leaflet.
TROUBLESHOOTING Try This... Recharge or replace the Li-Ion battery. No Power Extreme operating temperatures may affect battery life. Refer to “About the Li-Ion Battery” on page 15 Confirm Interference Eliminator Code is set. Hearing other noises or conversation on a channel Frequency or Interference Eliminator Code may be in use. Change settings: either change frequencies or codes on all radios. Make sure radio is at the right frequency and code when transmitting.
Symptom Try This... TROUBLESHOOTING Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Limited talk range Change location of radio. To increase range and coverage, you can reduce obstructions or increase power. UHF radios provides greater coverage in industrial and commercial buildings.
Symptom Try This... Radios are too close; they must be at least five feet apart. Radios are too far apart or obstacles are interfering with transmission. TROUBLESHOOTING Heavy static or interference Refer to “Talking and Monitoring” on page 29. Recharge or replace Li-Ion battery. Low batteries Extreme operating temperatures affect battery life. Refer to “About the Li-Ion Battery” on page 15.
Symptom Try This... TROUBLESHOOTING VOX feature might be set to OFF. English Cannot activate VOX Use the CPS to ensure that the VOX Sensitivity level is not set to ‘0’. Accessory not working or not compatible. Refer to “Hands-Free Use/VOX” on page 33. Check drop-in tray charger is properly connected and correspond to a Battery does not charge although it has been placed in the drop-in charger for a while compatible power supply.
USE AND CARE Do not immerse in water Do not use alcohol or cleaning solutions If the radio is submerged in water...
FREQUENCY AND CODE CHARTS FREQUENCY AND CODE CHARTS English RM UHF FREQUENCIES CHART RM UHF Frequencies Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth 1 464.5000 12.5 kHz 15 461.1875 12.5 kHz 2 464.5500 12.5 kHz 16 461.2125 12.5 kHz 3 467.7625 12.5 kHz 17 461.2375 12.5 kHz 4 467.8125 12.5 kHz 18 461.2625 12.5 kHz 5 467.8500 12.5 kHz 19 461.2875 12.5 kHz 6 467.8750 12.5 kHz 20 461.3125 12.5 kHz 7 467.9000 12.5 kHz 21 461.3375 12.
RM UHF Frequencies (Continued) Frequency # Frequency (MHz) Bandwidth 29 462.9125 12.5 kHz 47 466.3625 12.5 kHz 30 464.4875 12.5 kHz 48 467.7875 12.5 kHz 31 464.5125 12.5 kHz 49 467.8375 12.5 kHz 32 464.5375 12.5 kHz 50 467.8625 12.5 kHz 33 464.5625 12.5 kHz 51 467.8875 12.5 kHz 34 466.0375 12.5 kHz 52 467.9125 12.5 kHz 35 466.0625 12.5 kHz 53 469.4875 12.5 kHz 36 466.0875 12.5 kHz 54 469.5125 12.5 kHz 37 466.1125 12.5 kHz 55 469.5375 12.5 kHz 38 466.
FREQUENCY AND CODE CHARTS RM UHF Frequencies (Continued) Frequency # Frequency (MHz) Bandwidth Note: English Frequency # Frequency (MHz) Bandwidth 65 451.1875 12.5 kHz 78 456.1875 12.5 kHz 66 451.2375 12.5 kHz 79 456.2375 12.5 kHz 67 451.2875 12.5 kHz 80 456.2875 12.5 kHz 68 451.3375 12.5 kHz 81 456.3375 12.5 kHz 69 451.4375 12.5 kHz 82 456.4375 12.5 kHz 70 451.5375 12.5 kHz 83 456.5375 12.5 kHz 71 451.6375 12.5 kHz 84 456.6375 12.5 kHz 72 452.3125 12.
d – UHF DEFAULT FREQUENCIES CHART RMU2080D Channel Frequency # Frequency (MHz) Code # Code Bandwidth 1 2 464.5500 1 67.0 Hz 12.5 kHz 2 8 467.9250 1 67.0 Hz 12.5 kHz 3 5 467.8500 1 67.0 Hz 12.5 kHz 4 6 467.8750 1 67.0 Hz 12.5 kHz 5 10 461.0625 1 67.0 Hz 12.5 kHz 6 12 461.1125 1 67.0 Hz 12.5 kHz 7 14 461.1625 1 67.0 Hz 12.5 kHz WC 162.4000 1 67.0 Hz 12.
CTCSS AND PL/DPL CODES FREQUENCY AND CODE CHARTS CTCSS Codes CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 179.9 3 74.4 16 114.8 29 4 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 103.5 26 162.2 122 (*) 69.
DPL Code DPL Code DPL Code 39 23 55 116 71 243 40 25 56 125 72 244 41 26 57 131 73 245 42 31 58 132 74 251 261 43 32 59 134 75 44 43 60 143 76 263 45 47 61 152 77 265 46 51 62 155 78 271 47 54 63 156 79 306 48 65 64 162 80 311 49 71 65 165 81 315 50 72 66 172 82 331 51 73 67 174 83 343 52 74 68 205 84 346 53 114 69 223 85 351 54 115 70 226 86 364 FREQUENCY AND CODE CHARTS PL/DPL Codes 67 English
FREQUENCY AND CODE CHARTS PL/DPL Codes (Continued) English DPL Code DPL Code DPL Code 87 365 104 565 121 754 88 371 105 606 123 645 89 411 106 612 124 Customized PL 90 412 107 624 125 Customized PL 91 413 108 627 126 Customized PL 92 423 109 631 127 Customized PL 93 431 110 632 128 Customized PL 94 432 111 654 129 Customized PL 95 445 112 662 130 Inverted DPL 39 96 464 113 664 131 Inverted DPL 40 97 465 114 703 132 Inverted DPL 41 98
PL/DPL Codes (Continued) Code DPL Code DPL Code 139 Inverted DPL 48 156 Inverted DPL 65 173 Inverted DPL 82 140 Inverted DPL 49 157 Inverted DPL 66 174 Inverted DPL 83 141 Inverted DPL 50 158 Inverted DPL 67 175 Inverted DPL 84 142 Inverted DPL 51 159 Inverted DPL 68 176 Inverted DPL 85 143 Inverted DPL 52 160 Inverted DPL 69 177 Inverted DPL 86 144 Inverted DPL 53 161 Inverted DPL 70 178 Inverted DPL 87 145 Inverted DPL 54 162 Inverted DPL 71 179 Inverted DPL 8
FREQUENCY AND CODE CHARTS PL/DPL Codes (Continued) English DPL Code DPL Code DPL Code 190 Inverted DPL 99 200 Inverted DPL 109 210 Inverted DPL 119 191 Inverted DPL 100 201 Inverted DPL 110 211 Inverted DPL 120 192 Inverted DPL 101 202 Inverted DPL 111 212 Inverted DPL 121 193 Inverted DPL 102 203 Inverted DPL 112 213 Inverted DPL 123 194 Inverted DPL 103 204 Inverted DPL 113 214 Customized DPL 195 Inverted DPL 104 205 Inverted DPL 114 215 Customized DPL 196 Inv
Notes FREQUENCY AND CODE CHARTS English 71
MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADA English MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADA What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
Exclusions Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products.
MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADA Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CDROM, or floppy disk). Length of Coverage Ninety (90) days from the date of purchase.
EXPORT LAW ASSURANCES This product is controlled under the export regulations of the United States of America. The Governments of the United States of America may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce. PATENT NOTICE This product is covered by one or more of the following United States patents.
ACCESSORIES Part No. ACCESSORIES AUDIO ACCESSORIES English Part No. BATTERY Description Description PMNN4434_R Standard Li-Ion Battery PMNN4453_R High Capacity Li-Ion Battery 53815 Headset w/Boom Mic BR HMN9026_R Remote Speaker Mic BR HKLN4477_ Surveillance Earpiece BR 53865 Headset w/Swivel Boom Mic HKKN4028_ Radio to Radio Cloning Cable 53866 Earbud w/Clip PTT Mic BR HKKN4027_ CPS Programming Cable 56517 Earpiece w/Inline Mic RLN6423_ Swivel Earpiece BR 76 CABLES Part No.
CARRY ACCESSORIES Part No. HKLN4510_ Description Swivel Holster ACCESSORIES SOFTWARE APPLICATIONS Part No.
ACCESSORIES Notes English 78
M RM Series™ Features Summary Programmable Via Advanced Configuration Programmable via CPS Display NonDisplay Display NonDisplay Backlight No N/A Yes N/A 5 Seconds Battery Save (2) No No Yes Yes ON Buttons Reset No No Yes Yes ON Features Default Value Programming Tips Choose the backlight’s time out by using the CPS. Toggle ON/OFF via CPS only. Available only via CPS. Allows resetting the radio buttons to factory default values. Refer to Radio Buttons Summary Table.
Programmable Via Advanced Configuration Features Display NonDisplay Programmable via CPS Default Value Display Programming Tips NonDisplay Only Display Models. To enter or exit Channel Aliasing mode press PTT and Channel Aliasing Yes N/A Yes N/A OFF buttons simultaneously while turning radio ON for 3 sec. After editing, to exit and save, long press the PTT. Note: To edit, refer to Programming Features/ Editing Channels.
Features Programmable Via Advanced Configuration Programmable via CPS NonDisplay NonDisplay Display Default Value Display Programming Tips Enables radio to enter cloning mode in order to clone its profile settings into other radios (using Cloning Mode Yes Yes Yes Yes ENABLED Radio to Radio Cloning Cable or Multi-Unit Charger). Press PTT, SB2 while turning radio ON. Note: You can clone radios using the CPS. This feature is referred in the CPS software as “Codeplug Password”.
Programmable Via Advanced Configuration Features Programmable via CPS Default Value Display NonDisplay Display NonDisplay N/A N/A N/A N/A Programming Tips Radios Bandwidth is fixed and non-programmable. Bandwidth Range Model Dependant Bandwidth Range for 2W radios: VHF 150.8 - 160 Mhz / UHF 450-470 Mhz.
Features Programmable Via Advanced Configuration Programmable via CPS Display NonDisplay Display NonDisplay Yes N/A Yes N/A Default Value Programming Tips Press and hold Keypad Lock (2) UNLOCKED (MENU) button for 4 seconds to lock the radio keypad. To unlock, press (MENU) button for 4 seconds.
Programmable Via Advanced Configuration Features Microphone Gain Level, RADIO Programmable via CPS Default Value Display NonDisplay Display NonDisplay Yes No Yes Yes Programming Tips Medium For front panel programming enter Advanced (Level 2) Configuration Mode (1). Long Press SB1 to monitor and press SB1 again to Monitor (4) Yes Yes Yes Yes SB1 Button release. Note: PL/DPL defeat feature should be disabled in order to monitor.
Features Programmable Via Advanced Configuration Programmable via CPS NonDisplay NonDisplay Display Default Value Display Programming Tips Use CPS to program a SBx button to be used for Power Select (4) No No Yes Yes 2W (1W Model dependant) selecting the transmission power level you want for each channel. Note: There may be power restrictions depending on the frequency chosen in each channel.
Programmable Via Advanced Configuration Features Scan Programmable via CPS Default Value Display NonDisplay Display NonDisplay Yes Yes N/A N/A SB2 Button Programming Tips Short press SB2 to enable/disable scan. Use CPS for editing Scan List (adding/removing Multiple (16) Scan List Yes No Yes Yes ON - All Channels channels to be scanned). For display models only: you can add/delete channels in the scan list using front panel by going into Advanced Configuration Mode(1).
Features Programmable Via Advanced Configuration Programmable via CPS NonDisplay NonDisplay Display Default Value Display Programming Tips Front panel radio programming available in display VOX Sensitivity Level Yes No Yes Yes OFF (level 0) models by pressing PTT or (MENU) buttons and scrolling down/up with and buttons to set value. Long press PTT to save. Allows to use ‘hands-free’ mode connecting microphone accessories.
New Features Programmable Via Advanced Configuration Features Programmable via CPS Default Value Display NonDisplay Display NonDisplay No No Yes Yes Programming Tips This feature prevents radio’s transmitter from being Channel Busy Lock Out OFF activated if a signal strong enough to break through the noise ‘squelch’ is present. Silent Mode is only activate when VOX/iVOX is activated.
Features Programmable Via Advanced Configuration Programmable via CPS NonDisplay NonDisplay Display Default Value Display Programming Tips Set the current channel with high priority scan. If Weather Alert is enabled and the radio is in two-way Priority Scan No No Yes Yes OFF radio mode, the radio shall enable Weather Alert Scan and ignore public priority scan, talkaround scan or Auto-Scan.
Programmable Buttons Chart Button Monitor Scan / Nuisance Delete Call Tone Power Select Scramble Backlight No Operation Default SB1 Default SB2 Default BUTTON A (*) Default BUTTON B (*) Notes: • Buttons come programmed to default functions. Using CPS you can assign one of the features shown in the chart, so the button can toggle values • (*) Display models only.
Icons Chart Icon Symbol Comments Battery Level Displayed during normal radio mode operation, displays battery life remaining Channel Displayed during normal radio operation and when programming channel features Code Displayed during normal radio operation and when programming codes features Frequency Displayed during normal radio operation and when programming frequency features Keypad lock Displayed whenever the Keypad lock feature is enabled (keypad is locked) Program Displayed whenever the
Icon Symbol Comments Scramble Displayed whenever scramble is enabled. Power Select Displayed whenever the channel is transmitting or set to a high-power selection Signal Strength RSSI Display Icon numbers of bars will indicate the strength of the received signal. Vox/IVox Displayed when IVOX/VOX enabled or when programming MIC / MIC gain features.
m Motorola Solutions, Inc. 1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A. http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved.