User's Manual
Table Of Contents
- CDM1550.LS+ Mobile Professional Radio User Guide
- Table of Contents
- Computer Software Copyrights
- Product Safety and RF Exposure Compliance
- Introduction
- Radio Overview
- Getting Started
- Turning the Radio On or Off
- Adjusting the Volume
- Selecting a Trunked Zone and Talkgroup
- Sending a Trunked Call
- Selecting a Conventional Zone and Channel
- Direct Zone Access
- Direct Channel Access
- Sending a Conventional Call
- Receiving a Trunked or Conventional Call
- Repeater or Talkaround Mode (Conventional Operation Only)
- Call Light (Trunked Operation Only)
- Home Channel
- Horn and Lights
- Passport Trunking
- Radio Calls (LTR Trunked and Conventional)
- Making a Selective Call
- Receiving a Selective Call
- Sending a Call Alert Page
- Receiving a Call Alert Page
- Radio Check
- Sending a Status
- Sending a Message
- Receiving a Message
- Responding to Emergency Alerts (Conventional Operation Only)
- Clearing an Emergency Alert (Conventional Operation Only)
- Sending an Emergency Remote Monitor (Conventional Operation Only)
- Sending an Emergency Alert (Conventional Operation Only)
- Remote Monitor
- Selective Radio Inhibit
- Editing a Radio Call List
- Name and Call Tone Tagging
- Scan
- Talkback
- PassPort Primary Auto Group Scan (PassPort Trunked Operation Only)
- PassPort Group Scan (PassPort Trunked Operation Only)
- Auto Group Scan (LTR Trunked Operation Only)
- All Group Scan (LTR Trunked Operation Only)
- System Scan (LTR Trunked and Conventional Operation Only)
- Deleting a Nuisance Channel/ Talkgroup (PassPort Group Scan or System Scan Operation Only)
- Editing a Scan List (PassPort Group Scan or System Scan Operation Only)
- Adding or Deleting Talkgroups or Channels in a Scan List
- Prioritizing a Talkgroup or Channel in a Scan List (System Scan Operation Only)
- Phone
- Voice Storage
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
- Quick Reference
49
English
RADIO CALLS (LTR
TRUNKED AND CONVENTIONAL)
To activate the Emergency Alert, press the
preprogrammed Emergency button.
To cancel the Emergency Alert, press and
hold the preprogrammed Emergency button.
REMOTE MONITOR
Remote Monitor allows you to automatically
key-up another radio to listen-in on all
surrounding audio. This feature can be initiated
by a dispatcher to a mobile radio, or from a
mobile radio to another mobile radio.
To Activate Remote Monitor
To Receive a Remote Monitor
Upon receiving a Remote Monitor Command,
the radio:
1. Keys the transmitter.
2. Acknowledges the command
3. Sends the PTT-ID
4. Activates the microphone.
Note: If a remote microphone is attached, it
responds.
1 ) to enter Menu Mode.
2 y or z until
3 ) to select
4 y or z until
5 ) to select the appropriate call list
member:
Radio Call
Radio Call
Remote Monitor
MDC CALL 01
Note: An audio or visual indication may
come up on the receiving radio if
preprogrammed by your dealer.
To cancel Remote Monitor, press any
button on the radio.
Note: Remote monitor automatically
ceases after one transmit and one
receive cycle.