User's Manual
Table Of Contents
- CDM1550.LS+ Mobile Professional Radio User Guide
- Table of Contents
- Computer Software Copyrights
- Product Safety and RF Exposure Compliance
- Introduction
- Radio Overview
- Getting Started
- Turning the Radio On or Off
- Adjusting the Volume
- Selecting a Trunked Zone and Talkgroup
- Sending a Trunked Call
- Selecting a Conventional Zone and Channel
- Direct Zone Access
- Direct Channel Access
- Sending a Conventional Call
- Receiving a Trunked or Conventional Call
- Repeater or Talkaround Mode (Conventional Operation Only)
- Call Light (Trunked Operation Only)
- Home Channel
- Horn and Lights
- Passport Trunking
- Radio Calls (LTR Trunked and Conventional)
- Making a Selective Call
- Receiving a Selective Call
- Sending a Call Alert Page
- Receiving a Call Alert Page
- Radio Check
- Sending a Status
- Sending a Message
- Receiving a Message
- Responding to Emergency Alerts (Conventional Operation Only)
- Clearing an Emergency Alert (Conventional Operation Only)
- Sending an Emergency Remote Monitor (Conventional Operation Only)
- Sending an Emergency Alert (Conventional Operation Only)
- Remote Monitor
- Selective Radio Inhibit
- Editing a Radio Call List
- Name and Call Tone Tagging
- Scan
- Talkback
- PassPort Primary Auto Group Scan (PassPort Trunked Operation Only)
- PassPort Group Scan (PassPort Trunked Operation Only)
- Auto Group Scan (LTR Trunked Operation Only)
- All Group Scan (LTR Trunked Operation Only)
- System Scan (LTR Trunked and Conventional Operation Only)
- Deleting a Nuisance Channel/ Talkgroup (PassPort Group Scan or System Scan Operation Only)
- Editing a Scan List (PassPort Group Scan or System Scan Operation Only)
- Adding or Deleting Talkgroups or Channels in a Scan List
- Prioritizing a Talkgroup or Channel in a Scan List (System Scan Operation Only)
- Phone
- Voice Storage
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
- Quick Reference
43
English
RADIO CALLS (LTR
TRUNKED AND CONVENTIONAL)
To Send a Status
1
) to enter Menu Mode.
2
y or z until
3
) to select
4
y or z to locate the desired status in
the preprogrammed list.
–or–
when using the enhanced keypad
microphone only,enter the number of the
status you wish to send.
–or–
if programmed by your dealer (see page
23),
press the button that has been
preprogrammed for a specific status.
Note: You cannot retransmit the current
status update.
Status
Status
Notes: If the radio is not able to send the
status or the radio does not receive
an acknowledgement if an
acknowledgement is expected, you
see:
If the radio is not able to send the
status and no acknowledgement is
expected, you see:
No Acknowledge
No Channel