User's Manual

ASTRO XTL 5000 Digital Mobile Radio with W3 Control Head 39
Common Radio Features
Programming a Scan List
This feature lets you change the channels that are included in the
current scan list and their priorities.
1 Press
< or > to scroll to 352*.
2 Press the
m button below 352*.
3 Press the
< or > buttons to find
6&$1.
4 Press the
m button below 6&$1 to access the scan list.
The display shows the
6(/, '(/, and 5&/ sofkeys. It also shows
a flashing
I (the programming-mode annunciator) until you
exit list programming mode.
5 Press the
< to > buttons to scroll through the available
zones.
6 Press the MODE rocker switch to scroll through the different
modes (channels) of a zone.
OR
To directly access that channel of the current zones, use the
keypad to enter a channel’s numeric location in the list.
Note: If the channel is a member of the scan list, the display
shows
G (the scan status annunciator).
7 Press the
m button below 6(/ to add
or remove a channel from the scan list
or to change a scan list member’s
priority. (The S1, or Select, button also
serves the same function.)