User's Guide

English
102
the accessories, see AccessoriesFor more information
about the accessories, see Accessories on page 113.
13.5
Cloning Mode Using Wireless
PROFILE ID Number
The PROFILE ID Number Wireless Cloning feature is
useful when you want to clone the PROFILE ID Number
for all the radios in your fleet, but you do not want to clone
particular radio settings that may be unique for each radio
a Press PTT→Volume Down buttons at the same
time while turning the radio on.
b Wait three seconds before releasing the buttons
until you hear “Clone Mode Serial” voice prompt
from the Source Radio.
NOTE:
Serial cloning for Curve series is compatible
with DLR radios only.
a Press and release the Volume Down button.
You hear "Wireless" from the Source Radio.
such as Top button configuration, MIC Gain, Radio Name.
Wireless PROFILE ID preserves each user radio setup, but
still ensure that all radios are under the same PROFILE
ID Number. This feature is useful if you do not have a
programming Cable, Cloning Cable or PC easily available.
13.5.1
Configuring Cloning Mode Using
Wireless PROFILE ID Number
1 Turn the Source Radio on by performing the
following actions:
2 Turn on the Target Radio by performing the following
actions:
a Press PTT→Volume Down buttons at the same
time while turning the radio on.