User's Manual
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Informations importantes sur la sécurité
- Version du logiciel
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Charging the Battery
- Attaching the Battery‡
- Installing the Antenna
- Attaching the Accessory Connector Cover
- Installing Accessories with GCAI Connector
- Turning On Your Radio‡
- Adjusting the Volume†
- Pairing Radio with Pod and Earpiece†‡
- Pairing Radio with Mission Critical Remote Control Unit (RCU)
- Using the Carry Holster
- Tying Your Radio and Flexible Antenna to Your Body
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Scan
- Call Alert Paging†‡
- Emergency Operation†‡
- Man Down†‡
- Secure Operations
- Trunking System Controls†‡
- Mission Critical Wireless - Bluetooth® -†‡
- Turning the Bluetooth On
- Turning the Bluetooth Off
- Re-Pair Timer
- Bluetooth Drop Timer
- Pairing the Bluetooth Device with Your Radio
- Indicating the Bluetooth Connection is Lost
- Turning the Bluetooth Audio On (Routing the Audio from Your Radio to the Headset)
- Turning the Bluetooth Audio Off (Routing the Audio from the Headset to Your Radio)
- Adjusting the Volume of Your Radio from Bluetooth Audio Device
- Clearing All Bluetooth Devices Information
- Programming Over Project 25 (POP 25) (ASTRO 25 and ASTRO Conventional)
- Utilities
- Flipping the Display on DRSM‡
- Controlling the Display Backlight‡
- Locking and Unlocking the Controls†‡
- Turning Voice Mute On or Off†‡
- Using the Time-Out Timer
- Using the Conventional Squelch Operation Features
- Using the Digital PTT ID Feature‡
- Using the Smart PTT Feature (Conventional Only)
- Voice Announcement†
- Helpful Tips
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty
Advanced Features
English
44
Note: Emergency must be set up for this feature to operate.
For details on operating the Emergency alerts, please
see Emergency Operation†‡ on page 39.
If your radio is preprogrammed to horizontal only, it
must be worn in a vertical position otherwise the Man
Down alert may be inadvertently triggered.
When your radio is programmed with Man Down
feature, special care is required when charging your
radio with a wall mounted charger. See Handling
Your Radio on page 65 for details.
Pre-Alert Timer
This timer sets the amount of time that a Man Down condition
must be present before your are warned of the Man Down
condition.
When your radio detects that it has returned to the vertical
position or when your radio detects motion, the Pre-Alert timer
stops and is reset.
The Pre-Alert timer reinitiates when your radio detects it is in the
horizontal position or motionless again.
Post-Alert Timer
This timer sets the amount of time your radio needs to remain in
the Man Down condition before the Emergency alarm is
transmitted. When the Post-Alert Timer is initiated, your radio
alerts you with an audible tone and displays the “MAN-DOWN”
text.
See Exiting Man Down Feature on page 45 to exit Man Down
feature.
Alerting Tones When Man Down Feature is
Triggered
The Man Down alert tone volume is directly related to your
radio’s volume. Ensure that your radio’s volume is loud enough
so that you do not miss the Post-Alert tone.
Note: If your radio is programmed with Silent Emergency,
your radio inhibits the alert tone and visual alert
associated with the emergency feature.
Note: If your radio is programmed in Surveillance Mode, your
radio inhibits all tones and lights on your radio
including the Man Down tones.