User's Manual

Changing your Radio’s Settings

Scanning

By using J, you can monitor Channels and Codes for transmissions and lock in on

the one that interests you. More importantly, you can find someone in your group who

has accidentally changed Channels and is talking during your scan. You don’t have

to set a new Channel or Code, the radio just resets itself temporarily to that Channel

and Code and you can start talking.

• To start scanning, briefly press

Your Channel/Code screen displays

and begins to scroll through Channels. When

the radio detects channel activity, it stops on that channel and displays its Channel and

Code. You can talk to the person(s) transmitting without having to switch Channels by

pressing

• To stop scanning, briefly press

If you press

while the radio is scanning, the radio will transmit on the Channel

which was selected before you activated Scan.

If no transmission occurs within five seconds, scanning will resume.

If you want to scan channels without Interference Eliminator Codes, change the Code

for your set Channel to 0 before you briefly press J.

Note: To Scan Repeater Channels (T7200 only), refer to page 36.

Scan Manual Advance

If Scan stops on a Channel that you don’t want, briefly press ] to resume scanning

for the next active Channel in the Scan List.

6864110R94.book Page 27 Friday, February 8, 2002 2:34 PM